

Platform 01 ESP8266
- Size
- 130.5 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 34
- Pads
- 104
- Tracks, vias
- 258, 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 17 Sep 2026
- Updated
- 19 Oct 2026
Overview
Platform 01 ESP8266 is an open-source printed circuit board by puspitabahari, from the puspitabahari/My_Experiment repository on GitHub. It is a 2-layer board of 130.5 × 70 mm with 21 parts on 34 nets, routed with 258 tracks and 5 vias.
It is built around the WEMOS D1 MINI. Its parts include 9 connectors, 3 switches, 2 resistors, 2 ICs and 2 diodes. It belongs with the ESP8266 boards of this library.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2 |
| 2 | SolderJumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 1 | ADC_PORT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | I2C_Port | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | J_PCF8574 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | LM2596_Module | MC00100:CONV_MC00100 | PS1 |
| 1 | POWER_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | RTC | RTC_Footprint:RTC_DS3231_Module | J3 |
| 1 | SERIAL_PORT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | SISI_BUS | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J11 |
| 1 | SISI_LOGIC | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | SW_Reset | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | WEMOS_D1_mini | RF_Module:WEMOS_D1_mini_light | U1 |
| 1 | ~ | LoRa_Footprint:LoRa | U3 |
More from puspitabahari/My_Experiment
2- 2 layers82.5 × 50 mm

- 2 layers36.5 × 20.5 mm

Similar boards
- 2 layers70.1 × 43.2 mm

Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396 - 2 layers37.6 × 29.3 mm

Romulator programmer interface
bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems
5 parts160 - 2 layers32.1 × 40.8 mm

Power Monitor Version 1
alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
8 parts122 - 2 layers91 × 49 mm

- 2 layers97.5 × 59.3 mm

Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 2 layers64.6 × 36.9 mm

Navien latest
htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices
30 parts65 - 2 layers49.5 × 30 mm

- 2 layers

Questions
How big is the Platform 01 ESP8266 PCB?
It measures 130.5 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Platform 01 ESP8266 use?
21 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Platform 01 ESP8266 KiCad files?
From the puspitabahari/My_Experiment repository on GitHub, at the commit this page was made from: the board is Platform_01_ESP8266_LoRa/Platform_01_ESP8266/Platform_01_ESP8266.kicad_pcb and its schematic Percobaan membuat PCB/Freerouting/freerouting/freerouting.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Platform 01 ESP8266 design in my own project?
Its repository states no licence, so its author keeps all rights: ask puspitabahari before reusing the design.