Skip to the content
2 layersStm, the printed circuit board in 3D

Boards and other components for R4

Copper layers
2
Thickness
1.59 mm
Parts
69
Nets
176
Pads
376
Tracks, vias
0, 0
Pours
1
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
1 Feb 2025
Updated
15 Feb 2026

Overview

Stm is an open-source printed circuit board by Purdue-Space-Program, from the Purdue-Space-Program/PSPL_R4_Avionics_Hardware repository on GitHub. It is a 2-layer board with 69 parts on 176 nets.

It is built around the LAN8742A-CZ, MAX13448EESD+T and FT232RL, with the LM1117MP-ADJ and ESD9B5.0ST5G among its other parts. Its parts include 47 capacitors, 8 resistors, 6 diodes, 5 ICs and 1 fuse. It belongs with the STM32 boards of this library.

Main components

5

README

README.md

PSPL_R4_Avionics_Hardware

Parts

69
QtyValueFootprintReferences
16100nCapacitor_SMD:C_0603_1608MetricC1, C3, C7, C10, C15, C16, C17, C18, C19, C21, C22, C23, C24, C25, C26, C49
61uCapacitor_SMD:C_0603_1608MetricC2, C4, C20, C36, C37, C38
410pCapacitor_SMD:C_0603_1608MetricC39, C40, C41, C42
4CCapacitor_SMD:C_0603_1608MetricC28, C29, C33, C34
2.1uCapacitor_SMD:C_0603_1608MetricC44, C50
2150Resistor_SMD:R_0603_1608MetricR28, R29
215pCapacitor_SMD:C_0603_1608MetricC13, C14
22.2uCapacitor_SMD:C_0603_1608MetricC11, C12
24.7uCapacitor_SMD:CP_Elec_6.3x7.7C45, C51
25.1kResistor_SMD:R_0603_1608MetricR24, R25
26pCapacitor_SMD:C_0603_1608MetricC8, C9
2ESD9B5.0ST5GDiode_SMD:D_SOD-923D7, D8
2LEDLED_SMD:LED_0603_1608MetricD5, D6
1.01uCapacitor_SMD:C_0603_1608MetricC32
10.022uCapacitor_SMD:C_0603_1608MetricC43
10.1uFCapacitor_SMD:C_0603_1608MetricC5
1100uCapacitor_SMD:CP_Elec_6.3x7.7C31
110uCapacitor_SMD:CP_Elec_6.3x7.7C30
1120Inductor_SMD:L_0603_1608MetricFB1
1121Resistor_SMD:R_0603_1608MetricR20
1155Resistor_SMD:R_0603_1608MetricR22
1200Resistor_SMD:R_0603_1608MetricR21
1470pCapacitor_SMD:C_0603_1608MetricC35
14u7Capacitor_SMD:C_0603_1608MetricC27
1500mAFuse:Fuse_1812_4532MetricF1
170Resistor_SMD:R_0603_1608MetricR23
1ESD7008MUTAGESD7008MUTAG:UDFN18_517BV_ONSCR2
1FT232RLPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmU5
1LAN8742APackage_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalViasU3
1LM1117MP-ADJPackage_TO_SOT_SMD:SOT-223-3_TabPin2U4
1MAX13448EESD_MAX13448EESD:SOIC127P600X175-14NU6
1RX_LEDLED_SMD:LED_0603_1608MetricD12
1STM32H730ZBTxPackage_QFP:LQFP-144_20x20mm_P0.5mmU2
1TX_LEDLED_SMD:LED_0603_1608MetricD11

More from Purdue-Space-Program/PSPL_R4_Avionics_Hardware

8
  • 2 layers89.5 × 130 mmBMS 1.1, the printed circuit board in 3D

    BMS 1.1

    Purdue-Space-Program/PSPL_R4_Avionics_Hardware

    Boards and other components for R4

    113 parts2
  • 4 layers78 × 67 mmFlight computer, the printed circuit board in 3D

    Flight computer

    Purdue-Space-Program/PSPL_R4_Avionics_Hardware

    Boards and other components for R4

    109 parts2
  • 4 layers65.5 × 93 mmPower systems, the printed circuit board in 3D

    Power systems

    Purdue-Space-Program/PSPL_R4_Avionics_Hardware

    Boards and other components for R4

    50 parts2
  • 2 layers82 × 42 mmDAQ dev board, the printed circuit board in 3D

    DAQ dev board

    Purdue-Space-Program/PSPL_R4_Avionics_Hardware

    Boards and other components for R4

    42 parts2
  • 4 layers34.3 × 34.3 mmMegaTC dev board, the printed circuit board in 3D

    MegaTC dev board

    Purdue-Space-Program/PSPL_R4_Avionics_Hardware

    Boards and other components for R4

    39 parts2
  • 2 layers34.5 × 32.3 mmPyro, the printed circuit board in 3D

    Pyro

    Purdue-Space-Program/PSPL_R4_Avionics_Hardware

    Boards and other components for R4

    15 parts2
  • 2 layers25.5 × 23 mmIMU Dev Board, the printed circuit board in 3D

    IMU Dev Board

    Purdue-Space-Program/PSPL_R4_Avionics_Hardware

    Boards and other components for R4

    12 parts2
  • 2 layers22 × 28 mmMagnetometer Dev Board, the printed circuit board in 3D

    Magnetometer Dev Board

    Purdue-Space-Program/PSPL_R4_Avionics_Hardware

    Boards and other components for R4

    5 parts2

Similar boards

  • 4 layers89.1 × 92.1 mmGnss module, the printed circuit board in 3D

    Gnss module

    spacelab-ufsc/gnss-module

    21 parts3
  • 4 layers83 × 106 mmAsynthosc, the printed circuit board in 3D

    Asynthosc

    everedero/asynth2osc

    Modular analog synth to OpenOSC bridge

    268 parts4GPL-3.0
  • 4 layers134 × 100 mmMCU Unit, the printed circuit board in 3D

    MCU Unit

    camerachan/F767ZI_TestBench_sch

    158 parts
  • 4 layers84 × 67.2 mmTiny4xPoweredStereoMixer, the printed circuit board in 3D

    Tiny4xPoweredStereoMixer

    cracked-machine/Tiny4xPoweredStereoMixer

    A 9V Stereo Splitter for 4 channels

    55 parts1MIT
  • 2 layers142.6 × 85.1 mmLineFollower Speedy-, the printed circuit board in 3D

    LineFollower Speedy-

    Club-robotica-UDLSB/LineFollower-Speedy-

    Documentación del desarrollo del Seguidor de línea (El speedy)

    89 partsGPL-3.0
  • 2 layers26.5 × 26.8 mmRcj25, the printed circuit board in 3D

    Rcj25

    hu-more-bot/RCJ2025

    Software & Hardware for RCJ2025

    39 partsMIT
  • 4 layers35 × 35 mmElo 112, the printed circuit board in 3D

    Elo 112

    irocobble/LED_Matrix

    design of custom PCB that drives an 8×8 LED matrix (64 LEDs) using an STM32F103C8T6

    137 parts
  • 2 layers55.2 × 25.7 mmBlinker v1 0, the printed circuit board in 3D

    Blinker v1 0

    poradam/NE555_blinker

    23 parts

Questions

What parts does the Stm use?

69 parts, built around the LAN8742A-CZ, MAX13448EESD+T, FT232RL and LM1117MP-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stm KiCad files?

From the Purdue-Space-Program/PSPL_R4_Avionics_Hardware repository on GitHub, at the commit this page was made from: the board is stm/stm.kicad_pcb and its schematic DAQ_dev_board/DAQ_dev_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stm design in my own project?

Its repository states no licence, so its author keeps all rights: ask Purdue-Space-Program before reusing the design.