

IMU Dev Board
Boards and other components for R4
- Size
- 25.5 × 23 mm
- Copper layers
- 2
- Thickness
- 1.69 mm
- Parts
- 12
- Nets
- 23
- Pads
- 58
- Tracks, vias
- 78, 8
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Feb 2025
- Updated
- 15 Feb 2026
Overview
IMU Dev Board is an open-source printed circuit board by Purdue-Space-Program, from the Purdue-Space-Program/PSPL_R4_Avionics_Hardware repository on GitHub. It is a 2-layer board of 25.5 × 23 mm with 12 parts on 23 nets, routed with 78 tracks and 8 vias.
It is built around the BMI088. Its parts include 4 diodes, 3 capacitors, 2 resistors, 2 connectors and 1 IC. It belongs with the sensors and measurement and microcontroller boards boards of this library.
Main components
1README
README.mdPSPL_R4_Avionics_Hardware
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | D_Zener | Diode_SMD:D_SOD-882 | D1, D2, D3, D4 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | BMI088 | BMI088:QFN_BMI085_BOS | U1 |
More from Purdue-Space-Program/PSPL_R4_Avionics_Hardware
8- 2 layers89.5 × 130 mm

- 4 layers78 × 67 mm

Flight computer
Purdue-Space-Program/PSPL_R4_Avionics_Hardware
Boards and other components for R4
109 parts2 - 2 layers

- 4 layers65.5 × 93 mm

Power systems
Purdue-Space-Program/PSPL_R4_Avionics_Hardware
Boards and other components for R4
50 parts2 - 2 layers82 × 42 mm

DAQ dev board
Purdue-Space-Program/PSPL_R4_Avionics_Hardware
Boards and other components for R4
42 parts2 - 4 layers34.3 × 34.3 mm

MegaTC dev board
Purdue-Space-Program/PSPL_R4_Avionics_Hardware
Boards and other components for R4
39 parts2 - 2 layers34.5 × 32.3 mm

- 2 layers22 × 28 mm

Magnetometer Dev Board
Purdue-Space-Program/PSPL_R4_Avionics_Hardware
Boards and other components for R4
5 parts2
Similar boards
- 4 layers100.1 × 60.2 mm

Hades
pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
215 parts1kBSD-3-Clause - 4 layers55 × 55 mm

RBoard
pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.
90 parts339 - 8 layers50 × 50 mm

Omodri laas
open-dynamic-robot-initiative/open-motor-driver-initiative
Open-source drive for brushless motors, following the open dynamic robot initiative
265 parts122BSD-3-Clause - 4 layers99.8 × 94.6 mm

Oresat adcs card
oresat/oresat-adcs-hardware
Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers
598 parts21GPL-2.0 - 4 layers70.1 × 50.9 mm

Flight computer
Terrapin-Rocket-Team/SRAD-Avionics
Code and PCBs for the avionics subteam for the SRAD flight computer and side projects
121 parts17 - 4 layers62.8 × 97.5 mm

- 4 layers30.5 × 82.6 mm

Circuit board design
ImperialSpaceSociety/Project-Mach-1
This is the code and hardware designs for the high powered rocketry project at the Imperial College Space Society
89 parts12 - 4 layers64 × 60 mm

Dronemagnav
ajisrawi/dronemagnav
Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.
60 parts11
Questions
How big is the IMU Dev Board PCB?
It measures 25.5 × 23 mm and has 2 copper layers, 1.69 mm thick.
What parts does the IMU Dev Board use?
12 parts, built around the BMI088. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IMU Dev Board KiCad files?
From the Purdue-Space-Program/PSPL_R4_Avionics_Hardware repository on GitHub, at the commit this page was made from: the board is RF System/IMU Dev Board/IMU Dev Board.kicad_pcb and its schematic DAQ_dev_board/DAQ_dev_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IMU Dev Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Purdue-Space-Program before reusing the design.