2 layers26.8 × 62 mm
4 layers60 × 45 mm
Tuto kicad temp logger
pull-up-dev/tuto-kicad-temp-logger- Size
- 60 × 45 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 62
- Pads
- 226
- Tracks, vias
- 398, 134
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Jun 2024
- Updated
- 25 Aug 2024
Overview
Tuto kicad temp logger is an open-source printed circuit board by pull-up-dev, from the pull-up-dev/tuto-kicad-temp-logger repository on GitHub. It is a 4-layer board of 60 × 45 mm with 69 parts on 62 nets, routed with 398 tracks and 134 vias.
It is built around the ESP32-C3-WROOM-02-H4, SGM2212-3.3XKC3G/TR and LESD5D5.0CT1G, with the A-SP194BR5C-C01-3T and L8050QLT1G among its other parts. Its parts include 16 resistors, 13 capacitors, 5 diodes, 4 ICs and 3 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
SGM2212-3.3XKC3G/TR
SOT-223-3-40℃~+125℃ 0.002%Vout 20V 3.3V 450mV@(800mA) 800mA 80dB@(120Hz) 80uA Fixed Short Circuit Protection、Thermal Shutdown SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSG MicroVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorised
A-SP194BR5C-C01-3T
0603-40℃~+85℃ 120° 2.35V 25mA 45mcd 60mW 631nm 639nm Discrete Diode Red Top-mount Water Clear 0603 LED Indication - Discrete ROHSAmiccLED Indication - Discrete
L8050QLT1G
SOT-23-55℃~+150℃ 1 NPN 100 150nA 225mW 25V 500mV 5V 800mA NPN SOT-23 Bipolar (BJT) ROHSLeshan Radio (LRC)Bipolar (BJT)
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP201, TP202, TP203, TP204, TP205, TP206, TP207, TP301, TP302, TP303, TP304, TP305, TP401, TP402, TP403, TP404 +3 |
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C202, C203, C302, C304, C305, C401, C402 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R301, R306, R307, R402, R403 |
| 4 | 10u | Capacitor_SMD:C_0402_1005Metric | C201, C204, C205, C301 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H101, H102, H103, H104 |
| 3 | LESD5D5.0CT1G | tuto-kicad-temp-logger:D_SOD-523_non-pol | D201, D202, D203 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R204, R401 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C206, C303 |
| 2 | 270R | Resistor_SMD:R_0402_1005Metric | R201, R305 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R302, R303 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R202, R203 |
| 2 | A-SP194BR5C-C01-3T | LED_SMD:LED_0603_1608Metric | D204, D301 |
| 2 | L8050QLT1G | Package_TO_SOT_SMD:SOT-23 | Q301, Q302 |
| 2 | TE_FSM4JSMATR | tuto-kicad-temp-logger:TE_FSM4JSMATR | SW301, SW302 |
| 1 | 22.1k 1% | Resistor_SMD:R_0402_1005Metric | R205 |
| 1 | 47.1k 1% | Resistor_SMD:R_0402_1005Metric | R206 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R304 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U202 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J202 |
| 1 | ESP32-C3-WROOM-02 | PCM_Espressif:ESP32-C3-WROOM-02 | U301 |
| 1 | HOOYA_USB_306F | tuto-kicad-temp-logger:HOOYA_USB_306F | J201 |
| 1 | LOGO | tuto-kicad-temp-logger:logo | G*** |
| 1 | SGM2212-3.3XKC3G | Package_TO_SOT_SMD:SOT-223 | U201 |
| 1 | SHOU HAN TF-CARD H1.8 | tuto-kicad-temp-logger:SHOUHAN_TF_CARD_H1.8 | J401 |
| 1 | TMP102xxDRL | Package_TO_SOT_SMD:SOT-563 | U401 |
Questions
How big is the Tuto kicad temp logger PCB?
It measures 60 × 45 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Tuto kicad temp logger use?
69 parts, built around the ESP32-C3-WROOM-02-H4, SGM2212-3.3XKC3G/TR, LESD5D5.0CT1G and A-SP194BR5C-C01-3T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tuto kicad temp logger KiCad files?
From the pull-up-dev/tuto-kicad-temp-logger repository on GitHub, at the commit this page was made from: the board is tuto-kicad-temp-logger.kicad_pcb and its schematic mcu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tuto kicad temp logger design in my own project?
Its repository states no licence, so its author keeps all rights: ask pull-up-dev before reusing the design.
Similar boards
- 4 layers49.8 × 67.3 mm
- 4 layers44.4 × 58.4 mm
ESP32
RobertoAngelLora/Dise-o-Mecatronico
Materia Electiva de Mecatrónica - Diseño Mecatrónico
38 parts - 4 layers115 × 55 mm
Roamr motors
uw-roamr/roamr
turn your phone into a robot running SLAM with two motors, two control boards, and a bluetooth chip
110 parts6 - 4 layers124 × 95 mm
- 2 layers36.6 × 57.1 mm
ESP32 S3 devkit test
FrWA14/KiCad8_ESP32S3_DevModule_wroom-1_DevelopementBoard
Contient tout les fichier KiCad nécessaire pour faire une carte ESP32S3 avec un module Wroom-1.
44 parts1 - 4 layers89 × 51 mm
Kicad soundcard dev v0
radutolontan/BASM_Pocket_Museum
The Pocket Lab is the next-generation approach to science education. Designed by the Bucharest Applied STEAM Museum, it brings scientific exploration into anyone's hands.
141 parts1 - 2 layers35.2 × 51 mm
