Skip to the content
2 layers15 × 20.6 mmBBB Project, the printed circuit board in 3D

Beagle Bone Black Button deBounce Board

Size
15 × 20.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
9
Pads
22
Tracks, vias
17, 8
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
7 Dec 2023
Updated
23 Jan 2024

Overview

BBB Project is an open-source printed circuit board by psu-epl, from the psu-epl/bbb-beagle-bone-black-button-debounce-board repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 15 × 20.6 mm with 6 parts on 9 nets, routed with 17 tracks and 8 vias.

It is built around the MAX6816EUS. Its parts include 2 connectors, 1 capacitor, 1 IC and 1 switch.

Main components

1

README

README.md

bbb-beagle-bone-black-button-debounce-board

Beagle Bone Black Button deBounce Board

Parts

6
QtyValueFootprintReferences
10.1uCapacitor_SMD:C_0805_2012MetricC1
1Conn_01x01_PinConnector_Wire:SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm_Relief2xJ2
1Conn_02x04_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ1
1MAX6816Package_TO_SOT_SMD:SOT-143U1
1SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW1

The 5 most common of 6 parts.

Similar boards

  • 2 layers101.6 × 50.8 mmRc2014 monitor, the printed circuit board in 3D

    Rc2014 monitor

    Hyiger-Designs/rc2014_monitor

    Monitor Board for the RC2014

    62 parts2OSL-3.0
  • 2 layers69 × 69 mmFloppyv3 expansion, the printed circuit board in 3D

    Floppyv3 expansion

    AleBiCi/floppyboard_v3_breakout

    Breakout board design for FloppyBoard v3.1

    20 parts
  • 2 layersEsp32-starter board, the printed circuit board in 3D

    Esp32-starter board

    Jzuni97/esp32-starter-board

    A basic project for creating a starter board with an esp32 SoC.

    13 parts
  • 4 layers110 × 30.5 mmFitLensPCB, the printed circuit board in 3D

    FitLensPCB

    nabudahab/FitLensPCB

    FitLens Senior Design PCB

    107 parts
  • 4 layers200 × 50 mmNixie Clock, the printed circuit board in 3D

    Nixie Clock

    drewsum/Nixie_Clock

    A nixie clock designed around a PIC16LF1519

    286 parts
  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT

Questions

How big is the BBB Project PCB?

It measures 15 × 20.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BBB Project use?

6 parts, built around the MAX6816EUS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BBB Project KiCad files?

From the psu-epl/bbb-beagle-bone-black-button-debounce-board repository on GitHub, at the commit this page was made from: the board is BBB Project.kicad_pcb and its schematic BBB Project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BBB Project design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).