4 layers106 × 45 mm
2 layers123.5 × 73.5 mm
Sl ps-141
prusa3d/SL-PS-PCB3- Size
- 123.5 × 73.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 20
- Pads
- 83
- Tracks, vias
- 145, 6
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Sep 2019
- Updated
- 20 Sep 2019
Overview
Sl ps-141 is an open-source printed circuit board by prusa3d, from the prusa3d/SL-PS-PCB repository on GitHub. It is a 2-layer board of 123.5 × 73.5 mm with 41 parts on 20 nets, routed with 145 tracks and 6 vias.
It is built around the IRM-60-24, BLM18KG121TN1D and KPA-3010MGC. Its parts include 13 resistors, 4 capacitors, 3 connectors, 2 ICs and 2 transistors.
Main components
3README
README.mdParts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 11k | Resistor_SMD:R_1206_3216Metric | R1, R2, R5, R6, R9, R10, R11, R12 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R8, R13 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H3, H4 |
| 2 | NTR5103NT1G | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | *100n | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | *PE | sharedlib:faston-hole-m | P1 |
| 1 | *QR_CODE | sharedlib:QR-code-8x8mm | M2 |
| 1 | *SYM_Flash_Small | Symbol:Symbol_HighVoltage_Type2_CopperTop_VerySmall | SYM1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 22u | Capacitor_SMD:CP_Elec_6.3x5.3 | C2 |
| 1 | 330n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | AC_connector_IEC60320_sw_fus | sharedlib:ps_con_sw_acd | U2 |
| 1 | BLM18KG121TN1D | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | IRM-60-24 | sharedlib:CONV_IRM-60-48 | PS1 |
| 1 | ISP814XSM | sharedlib:Optocoupler_SMD_LTV-817S | U1 |
| 1 | KPA-3010MGC | sharedlib:LED-1104 | D1 |
| 1 | MOLEX 70543-0001 | sharedlib:Pin_1x02-XL | P8 |
| 1 | TBG-5-PW-2P/GN | sharedlib:PhoenixContact_MSTBVA-G_02x5.08mm_Vertical | P2 |
| 1 | ZKT-2.5A | sharedlib:MEC | M1 |
The 34 most common of 41 parts.
Similar boards
- 2 layers134.4 × 106.7 mm
Led controller
MbFredys/PCB-LEDs-Controller
LED-controller PCB design exercise focused on PWM control, power distribution, and hardware documentation.
42 parts6 - 2 layers133 × 88 mm
SonosHack backup
smariel/SonosPlay1Hack
Sonos Play:1 replacement with RaspberryPi
58 partsCERN-OHL-W-2.0 - 2 layers90 × 155 mm
- 4 layers91 × 53.1 mm
Nff pcb
o7-machinehum/flipper-blackhat
Linux based WiFi pentesting device for the Flipper Zero.
184 parts300 - 4 layers117.5 × 30 mm
- 2 layers275.7 × 105.3 mm
Hector
RickKross/hector
Hector is a 38-key column staggered keyboard with HE magnetic sensors
224 parts18CERN-OHL-W-2.0 - 2 layers55.1 × 48.1 mm
Questions
How big is the Sl ps-141 PCB?
It measures 123.5 × 73.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sl ps-141 use?
41 parts, built around the IRM-60-24, BLM18KG121TN1D and KPA-3010MGC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sl ps-141 KiCad files?
From the prusa3d/SL-PS-PCB repository on GitHub, at the commit this page was made from: the board is rev.1.4.1/sl-ps-141.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sl ps-141 design in my own project?
Its repository states no licence, so its author keeps all rights: ask prusa3d before reusing the design.