

Flight computer FOX
repo for the lyra flight computer
- Size
- 48.9 × 71.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 42
- Pads
- 103
- Tracks, vias
- 171, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Nov 2023
- Updated
- 30 May 2026
Overview
Flight computer FOX is an open-source printed circuit board by prs2026, from the prs2026/Lyra-flight-computer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 48.9 × 71.1 mm with 24 parts on 42 nets, routed with 171 tracks and 13 vias.
It is built around the ESP32-DEVKITC-VE and IRF540N. Its parts include 8 capacitors, 7 connectors, 2 ICs, 2 transistors and 1 resistor. It belongs with the ESP32 boards of this library.
Main components
2README
README.mdLyra-flight-computer
repo for the lyra flight computer
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 4 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J3, J4, J5 |
| 3 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J7, J8 |
| 2 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 1 | 0.1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 0.33uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | BMP280_Module | Charleslabs_Parts:BMP280_Module | A1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | ESP32-DevKitC | Espressif:ESP32-DevKitC | U1 |
| 1 | LED_BGRK | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | MPU6050_Module | Charleslabs_Parts:MPU6050_Module | A2 |
| 1 | R1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
More from prs2026/Lyra-flight-computer
12- 4 layers50 × 60 mm

- 4 layers50 × 60 mm

- 4 layers112 × 28 mm

- 4 layers22 × 53 mm

- 4 layers25 × 55 mm

- 4 layers54.3 × 39.1 mm

- 4 layers40 × 75 mm

- 2 layers66 × 100 mm

- 4 layers20 × 60 mm

- 4 layers40 × 75 mm

- 4 layers40 × 75 mm

- 4 layers18 × 40 mm

Similar boards
- 2 layers100 × 100 mm

L298, puente h
Aruzamen-Cristian/Lemurian-Clean
El robot acuático recolector de basura, Lemurian-Clean, es una innovadora solución para la limpieza de cuerpos de agua.
29 parts - 2 layers96.8 × 97 mm

Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers124.5 × 77.5 mm

- 2 layers55 × 90.8 mm

- 2 layers73.7 × 61 mm

- 2 layers

- 4 layers147.8 × 77 mm

2xBLDCPicoV3
AmericanRework/Pico-2x-BLDC
One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.
135 parts7 - 2 layers

PCB Layout
chgopireddy/Full-Bridge-Class-D-Audio-Amplifier
LTspice Model for Full Bridge Class D, Voltage Mode Control, Peak Current Mode Control
63 parts6
Questions
How big is the Flight computer FOX PCB?
It measures 48.9 × 71.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flight computer FOX use?
24 parts, built around the ESP32-DEVKITC-VE and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flight computer FOX KiCad files?
From the prs2026/Lyra-flight-computer repository on GitHub, at the commit this page was made from: the board is Deprecated/flight computer FOX/flight computer FOX.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flight computer FOX design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).