Skip to the content
2 layersSide switch, the printed circuit board in 3D

This is repository for Czech CanSat team Project SkyFall

Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
64
Pads
80
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 6 (file 20211014)
Created
18 Dec 2022
Updated
7 Sep 2026

Overview

Side switch is an open-source printed circuit board by Project-SkyFall, from the Project-SkyFall/CanSat-2023 repository on GitHub. It is a 2-layer board with 3 parts on 64 nets.

README

README.md

Disclaimer

This README isn't finished and will be edited in near future

CanSat-2023

This is a repository of the Czech CanSat team Project SkyFall, winner of CanSat's 2023 Czech national round

CanSat 2023

Documentation

About the team

Vít Brázda

Vít Brázda

Vít BrázdaVít is responsible for data visualization running on ground station, as well as making index of habitability of planet, where CanSat is landing. He has a lot of experience regarding Python.

David Haisman

David HaismanDavid handles electronics and programming on our CanSat. He designed PCB's, made some libraries and wrote the whole CanSat code. During the development of the CanSat he gained a lot of experience regarding PCB design and programming in C++.

Radim Leština

Radim LeštinaRadim is in charge of designing the outer construction of the CanSat itself. He has a lot of experience in designing and 3D printing mechanical contraptions.

Václav Horáček

Václav HoráčekVáclav is in charge of multiple departments, mainly the ones for documentation and recovery. In documentation he made the styles, graphics and oversees the documentation making process. His contribution in the recovery department is designing and sewing the CanSat's parachute.

Lukáš Nastoupil

Lukáš NastoupilLukáš designed and made the ground station, which is an essential part for our secondary mission. He designed the PCB's, modeled and programmed the ground station. He also worked on the real-time transmission of video from CanSat down to the ground station.

Adam Keřka

Adam KeřkaAdam leads the team itself and also the department of publicity. This mainly includes maintaining social networks accounts and communicating with sponsors. He also designed a lot of the graphics used in advertising and posts on social networks.

Vladimír Kašpar

Ing. Vladimír Kašpar is our mentor in the CanSat competition. We chose Vladimír Kašpar as our mentor based on his experience. In the CanSat 2019 he was a mentor of team Charles the fourth that made it to the European finale. He is also an electronics teacher at SPŠE a VOŠ Pardubice.

Jan Novotný

Jan Novotný is a freelance developer who makes web and mobile applications. He programmed the Project SkyFall webpage and supports our team on various other competitions and outgoings.

Parts

3
QtyValueFootprintReferences
2Conn_01x20Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ1, J3
1Conn_02x20_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ2

More from Project-SkyFall/CanSat-2023

8
  • 4 layers60.7 × 61.3 mmPower Unit, the printed circuit board in 3D

    Power Unit

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    162 parts6
  • 4 layers60.7 × 61.3 mmPower Unit 2, the printed circuit board in 3D

    Power Unit 2

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    102 parts6
  • 4 layers80 × 80 mmControl Unit, the printed circuit board in 3D

    Control Unit

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    97 parts6
  • 2 layers73.5 × 90 mmSide Unit, the printed circuit board in 3D

    Side Unit

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    75 parts6
  • 2 layers145 × 120 mmGround Station 2023, the printed circuit board in 3D

    Ground Station 2023

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    49 parts6
  • 2 layers65 × 75 mmFake Can, the printed circuit board in 3D

    Fake Can

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    5 parts6
  • 2 layers27 × 22 mmGstation LoRa, the printed circuit board in 3D

    Gstation LoRa

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    4 parts6
  • 2 layers33.5 × 18.5 mmGstation stepdown, the printed circuit board in 3D

    Gstation stepdown

    Project-SkyFall/CanSat-2023

    This is repository for Czech CanSat team Project SkyFall

    3 parts6

Similar boards

  • 2 layers40 × 30 mmBlinky, the printed circuit board in 3D

    Blinky

    earthtojake/text-to-cad

    Design physical products with AI

    3 parts26kMIT
  • 2 layers51.9 × 16 mmPassive2-rpi non standard adapter, the printed circuit board in 3D

    Passive2-rpi non standard adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    3 parts4.4kGPL-2.0
  • 2 layers16.3 × 16.3 mmSensor, the printed circuit board in 3D

    Sensor

    scottbez1/splitflap

    DIY split-flap display

    3 parts4.2k
  • 2 layersSub, the printed circuit board in 3D

    Sub

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    3 parts4kMIT
  • 2 layers85 × 30 mmDual stomp, the printed circuit board in 3D

    Dual stomp

    torvalds/GuitarPedal

    Linus learns analog circuits

    3 parts2.5kGPL-2.0
  • 2 layers124.5 × 33.7 mm172319-1 connector, the printed circuit board in 3D

    172319-1 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    3 parts1.2k
  • 2 layers10.5 × 83 mmProgrammingAdapter, the printed circuit board in 3D

    ProgrammingAdapter

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    3 parts1.1k
  • 2 layers21.2 × 51.3 mmPico reset, the printed circuit board in 3D

    Pico reset

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    3 parts1.1kMIT

Questions

What parts does the Side switch use?

3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Side switch KiCad files?

From the Project-SkyFall/CanSat-2023 repository on GitHub, at the commit this page was made from: the board is GroundStation/PCB/Ground Station 2023/side_switcher/side_switch/side_switch.kicad_pcb and its schematic CanSat/PCB_design/Control_Unit/Control_Unit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Side switch design in my own project?

Its repository states no licence, so its author keeps all rights: ask Project-SkyFall before reusing the design.