

Solar car
- Size
- 78.7 × 91.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 18
- Pads
- 66
- Tracks, vias
- 99, 15
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Sep 2026
- Updated
- 6 Oct 2026
Overview
Solar car is an open-source printed circuit board by professoralex13, from the professoralex13/solar-car repository on GitHub. It is a 2-layer board of 78.7 × 91.4 mm with 24 parts on 18 nets, routed with 99 tracks and 15 vias.
It is built around the TL494, BS250 and BS270, with the IPP034N03L G among its other parts. Its parts include 8 resistors, 7 capacitors, 3 transistors, 2 connectors and 1 IC. It belongs with the power boards of this library.
Main components
4TL494
SOP-160℃~+70℃ 1kHz~300kHz 250mA 6mA Built-in LDO regulator External SOP-16 DC-DC Converters ROHSJSMSEMIDC-DC ConvertersBS250
TO-92TO-92 MOSFETs ROHSQNHMOSFETsBS270
TO-92-55℃~+150℃ 1 N-channel 11pF 2.5V 2Ω@10V 400mA 50pF 5pF 60V 625mW N-Channel ±20V TO-92 MOSFETs ROHSonsemiMOSFETsIPP034N03L G
TO-220-55℃~+175℃ 1 N-channel 2.2V 2.8mΩ@10V 30V 5.3nF 80A 81pF 94W TO-220 MOSFETs ROHSInfineon TechnologiesMOSFETs
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5, R6, R8 |
| 3 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C4, C5 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 100n | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C7 |
| 1 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 150u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 2.2n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 220u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C6 |
| 1 | 3.9k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 50u | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | L1 |
| 1 | BS250 | Package_TO_SOT_THT:TO-92_Wide | Q2 |
| 1 | BS270 | Package_TO_SOT_THT:TO-92_Wide | Q1 |
| 1 | D_Schottky | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | IPP034N03L | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q3 |
| 1 | Motor Out | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3299P_Horizontal | RV1 |
| 1 | Solar In | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | TL494 | Package_DIP:DIP-16_W7.62mm | U1 |
Similar boards
- 2 layers165 × 114 mm

- 2 layers224.2 × 153.7 mm

- 2 layers99.3 × 98.6 mm

FlexiblePS
profdc9/FlexibleCharger
An Arduino-controlled charger for different kinds of batteries, or it can be a standalone power supply
118 parts13 - 2 layers61.6 × 53.7 mm

Osborne floppy emulator
khaddra/osborne-floppy-emulator
Floppy disk drive emulator for the Osborne 1. Unfinished.
82 parts2 - 2 layers177.4 × 65.5 mm

- 2 layers100 × 50 mm

- 2 layers58 × 34 mm

- 2 layers70.5 × 53 mm

SolarCar
jaimeuydebaron/Solar-Powered-RC-Car
To make it easy for you to get started with GitLab, here's a list of recommended next steps.
46 parts
Questions
How big is the Solar car PCB?
It measures 78.7 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solar car use?
24 parts, built around the TL494, BS250, BS270 and IPP034N03L G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solar car KiCad files?
From the professoralex13/solar-car repository on GitHub, at the commit this page was made from: the board is solar-car.kicad_pcb and its schematic solar-car.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solar car design in my own project?
Its repository states no licence, so its author keeps all rights: ask professoralex13 before reusing the design.