Skip to the content
2 layers74.4 × 99.3 mmLineinterrupter, the printed circuit board in 3D

A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

Size
74.4 × 99.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
85
Nets
48
Pads
208
Tracks, vias
487, 14
Pours
3
Routed
Yes
KiCad
KiCad 4
Created
15 Sep 2018
Updated
31 Jul 2024

Overview

Lineinterrupter is an open-source printed circuit board by profdc9, from the profdc9/DRSSTC-PCB-Pack repository on GitHub. It is a 2-layer board of 74.4 × 99.3 mm with 85 parts on 48 nets, routed with 487 tracks and 14 vias.

It is built around the ATTINY85-20PU, NE555 and L7809, with the LM339 and 1N5227B among its other parts. Its parts include 23 resistors, 20 connectors, 17 capacitors, 15 diodes and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

5

README

README.md

Dual Resonant Solid State Tesla Coil and Solid State Tesla Coil PCB pack. Copyright (C) 2018 by Daniel L. Marks, licensed under the Created Commons CC-BY-SA 4.0.

These are PCBs for use in DRSSTC/SSTC devices. They are projects using the free and open source Kicad software (kicad-pcb.org) version 4.0.7, so these projects may be modified using this software. Each file includes the following:

  1. Kicad project, so it can be modified or improved
  2. PDF Schematic
  3. Bill of materials, to refer to when assembling
  4. PNG circuit board picture, to refer to when assembling
  5. Gerber files

The projects, except for the interrupters, are 100 by 100 mm boards with 90 by 90 mm mounting hole spacing. These boards may be stacked using M3 spacers. Board of this size can often be fabricated for $5 (without shipping) from PCB manufacturers such as Seeedstudio. You can save on shipping per board if you have several of these made at a time, for example, the driver, interrupter, and a bridge board.

The projects are as follows:

ud27c - a through hole version of the Universal Tesla coil driver, version 2.7C. This is based on a design originally by Steve Ward and refined by others including Eric Goodchild and Gao Guangyan. It has substituted the through-hole parts IRF540N/IRF9540N complementary MOSFET pair for the FDD8424H dual MOSFET part. It includes phase lead, unlike the Universal Driver v1.3.

ud29 - an experimental version of ud27c that includes skip pulse functionality. Pulse skip is enabled or disabled using a jumper, so it may be used as a normal DRSSTC controller. The board has been built and worked for my coil.

PSoc5-power - a through-hole version of the Universal Driver 3 by Steve Ward and Jens Kerrinnes based on the PSoC5 system-on-chip. This includes the functionality for temperature, bus voltage, and bus current sensing. This is experimental. It uses the CYC8KIT-059 dev board plugged into the PCB using pin header sockets.

interrupter - a DRSSTC interrupter based on Steve Ward's burst mode interrupter. It includes a place for the IFE97 LED optical fiber transmission unit. The ability to include an external pulse trigger signal has been included for use with audio sources. Also includes a spot on the board for a OneTesla ATTINY85-based MIDI interrupter which may be flashed with the OneTesla code through the ICSP interface.

lineinterrupter - an experimental interrupter that interrupts on the peak of the AC cycle. Interrupting only at the peak of the AC cycle is intended to improve the power factor by minimizing the inrush of current into the bus capacitors as the magnitude of the voltage increases.

NOTE: You need to flash the included firmware on your ATTINY85 for the MIDI interrupter to work. Instructions are in the folder "oneTesla-usbInterrupter-software".

half-bridge-sstc - a half-bridge/full-bridge driver designed by myself that can either self-oscillate, or take an extetrnal antenna input from a Solid State Tesla Coil. It includes overcurrent and undervoltage protection.

half-bridge-transistor - a layout for a two TO-247 transistor half-bridge that includes an area for the capacitor divider network. Note the polarity on the gates indicated on the silkscreening always indicates the negative and positive voltage side of the gate; wire the phases of the gates accordingly (oppositely in this case). This convention is followed for all of the layouts. Space is included for both supply bypass/DC Link capacitors and snubber capacitors.

full-bridge-transistor - a layout for a four TO-247 transistor full-bridge. Space is included for supply bypass DC/Link capacitors and snubber capacitors. The two high-side gates should have their polarities wired oppositely, the two low-side gates should have their polarities wired oppositely, and the high and low-side gates of each half-bridge should be have their polarities wired oppositely.

half-bridge-multi - a layout for an eight TO-247 transistor half-bridge, with four transistors of each side of the half-bridge. The transistors should have a positive temperature coefficient to share current more equally. The high and low-side gates should have their polarities wired oppositely.

full-bridge-multi - a layout for an eight TO-247 transistor full-bridge, with two transistors on each side of each half bridge. The two high-side gates should have their polarities wired oppositely, the two low-side gates should have their polarities wired oppositely, and the high and low-side gates of each half-bridge should be have their polarities wired oppositely.

Parts

85
QtyValueFootprintReferences
12Conn_01x01Connectors:1pinJ2, J3, J6, J7, J8, J9, J11, J12, J13, J17, J18, J19
70.1 uFCapacitors_THT:C_Disc_D7.5mm_W4.4mm_P5.00mmC4, C5, C7, C10, C11, C13, C15
710kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR2, R8, R9, R12, R16, R17, R19
61N4007Diodes_THT:D_DO-41_SOD81_P10.16mm_HorizontalD2, D3, D8, D9, D10, D11
51N4148Diodes_THT:D_DO-41_SOD81_P7.62mm_HorizontalD4, D5, D7, D14, D15
41kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1, R4, R11, R14
30.01 uFCapacitors_THT:C_Disc_D7.5mm_W4.4mm_P5.00mmC3, C6, C8
350kPotentiometers:Potentiometer_WirePadsRV1, RV3, RV5
210 uFCapacitors_THT:CP_Radial_D6.3mm_P2.50mmC1, C2
21N5227BDiodes_THT:D_DO-41_SOD81_P10.16mm_HorizontalD12, D13
2220RResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR6, R15
268RResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR21, R22
2Conn_01x02Connectors_Terminal_Blocks:TerminalBlock_bornier-2_P5.08mmJ10, J14
2Conn_01x03Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmJ4, J5
2NE555Housings_DIP:DIP-8_W7.62mm_SocketU2, U3
11 uFCapacitors_THT:C_Disc_D7.5mm_W4.4mm_P5.00mmC14
110 nFCapacitors_THT:C_Disc_D7.5mm_W4.4mm_P5.00mmC16
1100Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR13
1100RResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR23
1100kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR5
11MResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR10
11N5819Diodes_THT:D_DO-41_SOD81_P7.62mm_HorizontalD6
11k5Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR20
12.2kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR7
122kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR18
14.7 uFCapacitors_THT:CP_Radial_D6.3mm_P2.50mmC17
147 nFCapacitors_THT:C_Disc_D7.5mm_W4.4mm_P5.00mmC9
1470 nFCapacitors_THT:C_Disc_D7.5mm_W4.4mm_P5.00mmC12
15kPotentiometers:Potentiometer_WirePadsRV4
16.8kResistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR3
1ATTINY85-20PUHousings_DIP:DIP-8_W7.62mm_SocketU5
1Barrel_JackConnectors:BARREL_JACKJ1
1Conn_01x03Connectors_Terminal_Blocks:TerminalBlock_bornier-3_P5.08mmJ15
1Conn_02x03_Odd_EvenPin_Headers:Pin_Header_Straight_2x03_Pitch2.54mmJ20
1IFE97lineinterrupter:IFE97OP1
1L7809TO_SOT_Packages_THT:TO-220-3_VerticalU1
1LEDLEDs:LED_D5.0mmD1
1LM339Housings_DIP:DIP-14_W7.62mm_SocketU4
1USB_BConnectors:USB_BJ16

More from profdc9/DRSSTC-PCB-Pack

10
  • 2 layers96.8 × 97 mmPsoc5power, the printed circuit board in 3D

    Psoc5power

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    133 parts59
  • 2 layers97.5 × 97.5 mmUd29, the printed circuit board in 3D

    Ud29

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    123 parts59
  • 2 layers97.5 × 97.5 mmUd27c, the printed circuit board in 3D

    Ud27c

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    106 parts59
  • 2 layersPsoc5power2, the printed circuit board in 3D

    Psoc5power2

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    93 parts59
  • 2 layers79.2 × 97 mmInterrupter, the printed circuit board in 3D

    Interrupter

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    80 parts59
  • 2 layers96.5 × 98 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    78 parts59
  • 2 layers98.6 × 98.6 mmFull bridge, the printed circuit board in 3D

    Full bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    46 parts59
  • 2 layers97.8 × 98 mmFull bridge, the printed circuit board in 3D

    Full bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    42 parts59
  • 2 layers98.6 × 98.6 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    42 parts59
  • 2 layers98.6 × 98.6 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    30 parts59

Similar boards

  • 2 layers57.9 × 83.9 mmKEY2USB, the printed circuit board in 3D

    KEY2USB

    acwright/KEY2USB

    Commodore 64 / C128 expansion port cartridge to USB HID keyboard

    23 parts4CERN-OHL-P-2.0
  • 2 layers60 × 60 mmIo analog pwm, the printed circuit board in 3D

    Io analog pwm

    SparkyBobo/dmxdemonstrator

    DMX Demonstrator

    30 parts2GPL-3.0
  • 2 layers231.1 × 106.7 mmSnark barker, the printed circuit board in 3D

    Snark barker

    schlae/snark-barker

    A 100% compatible replica of the famed SB 1.0 sound card

    199 parts687
  • 2 layers100 × 100 mmLcr 2, the printed circuit board in 3D

    Lcr 2

    yjmwxwx/stm32asm

    256 parts16GPL-3.0
  • 2 layersAlim10o, the printed circuit board in 3D

    Alim10o

    acmo0/PedalBoard-Power-Supply-Diy

    This is a description of pedalboard power supplies that I designed an made. I use this power supplies, they are fully working. Pay attention : they are made for 230VAC.

    110 parts14GPL-3.0
  • 4 layers66.1 × 75.8 mmStm audio board V3, the printed circuit board in 3D

    Stm audio board V3

    Papproni/Digital_guitar_effect

    This repostiroy is created to work on a digital guitar effect which makes use of DSP algorythms, and hardware.

    149 parts10MIT
  • 2 layers212.3 × 100 mmEuroSID, the printed circuit board in 3D

    EuroSID

    activexray/EuroSID

    A better SID Eurorack Module

    225 parts3

Questions

How big is the Lineinterrupter PCB?

It measures 74.4 × 99.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lineinterrupter use?

85 parts, built around the ATTINY85-20PU, NE555, L7809 and LM339. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lineinterrupter KiCad files?

From the profdc9/DRSSTC-PCB-Pack repository on GitHub, at the commit this page was made from: the board is lineinterrupter/lineinterrupter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lineinterrupter design in my own project?

Its repository states no licence, so its author keeps all rights: ask profdc9 before reusing the design.