Skip to the content
2 layers98.6 × 98.6 mmHalf bridge, the printed circuit board in 3D

A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

Size
98.6 × 98.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
13
Pads
82
Tracks, vias
228, 25
Pours
6
Routed
Yes
KiCad
KiCad 4
Created
15 Sep 2018
Updated
31 Jul 2024

Overview

Half bridge is an open-source printed circuit board by profdc9, from the profdc9/DRSSTC-PCB-Pack repository on GitHub. It is a 2-layer board of 98.6 × 98.6 mm with 42 parts on 13 nets, routed with 228 tracks and 25 vias.

Its parts include 12 connectors, 8 resistors, 8 diodes, 8 transistors and 2 capacitors. It belongs with the interfaces and adapters boards of this library.

README

README.md

Dual Resonant Solid State Tesla Coil and Solid State Tesla Coil PCB pack. Copyright (C) 2018 by Daniel L. Marks, licensed under the Created Commons CC-BY-SA 4.0.

These are PCBs for use in DRSSTC/SSTC devices. They are projects using the free and open source Kicad software (kicad-pcb.org) version 4.0.7, so these projects may be modified using this software. Each file includes the following:

  1. Kicad project, so it can be modified or improved
  2. PDF Schematic
  3. Bill of materials, to refer to when assembling
  4. PNG circuit board picture, to refer to when assembling
  5. Gerber files

The projects, except for the interrupters, are 100 by 100 mm boards with 90 by 90 mm mounting hole spacing. These boards may be stacked using M3 spacers. Board of this size can often be fabricated for $5 (without shipping) from PCB manufacturers such as Seeedstudio. You can save on shipping per board if you have several of these made at a time, for example, the driver, interrupter, and a bridge board.

The projects are as follows:

ud27c - a through hole version of the Universal Tesla coil driver, version 2.7C. This is based on a design originally by Steve Ward and refined by others including Eric Goodchild and Gao Guangyan. It has substituted the through-hole parts IRF540N/IRF9540N complementary MOSFET pair for the FDD8424H dual MOSFET part. It includes phase lead, unlike the Universal Driver v1.3.

ud29 - an experimental version of ud27c that includes skip pulse functionality. Pulse skip is enabled or disabled using a jumper, so it may be used as a normal DRSSTC controller. The board has been built and worked for my coil.

PSoc5-power - a through-hole version of the Universal Driver 3 by Steve Ward and Jens Kerrinnes based on the PSoC5 system-on-chip. This includes the functionality for temperature, bus voltage, and bus current sensing. This is experimental. It uses the CYC8KIT-059 dev board plugged into the PCB using pin header sockets.

interrupter - a DRSSTC interrupter based on Steve Ward's burst mode interrupter. It includes a place for the IFE97 LED optical fiber transmission unit. The ability to include an external pulse trigger signal has been included for use with audio sources. Also includes a spot on the board for a OneTesla ATTINY85-based MIDI interrupter which may be flashed with the OneTesla code through the ICSP interface.

lineinterrupter - an experimental interrupter that interrupts on the peak of the AC cycle. Interrupting only at the peak of the AC cycle is intended to improve the power factor by minimizing the inrush of current into the bus capacitors as the magnitude of the voltage increases.

NOTE: You need to flash the included firmware on your ATTINY85 for the MIDI interrupter to work. Instructions are in the folder "oneTesla-usbInterrupter-software".

half-bridge-sstc - a half-bridge/full-bridge driver designed by myself that can either self-oscillate, or take an extetrnal antenna input from a Solid State Tesla Coil. It includes overcurrent and undervoltage protection.

half-bridge-transistor - a layout for a two TO-247 transistor half-bridge that includes an area for the capacitor divider network. Note the polarity on the gates indicated on the silkscreening always indicates the negative and positive voltage side of the gate; wire the phases of the gates accordingly (oppositely in this case). This convention is followed for all of the layouts. Space is included for both supply bypass/DC Link capacitors and snubber capacitors.

full-bridge-transistor - a layout for a four TO-247 transistor full-bridge. Space is included for supply bypass DC/Link capacitors and snubber capacitors. The two high-side gates should have their polarities wired oppositely, the two low-side gates should have their polarities wired oppositely, and the high and low-side gates of each half-bridge should be have their polarities wired oppositely.

half-bridge-multi - a layout for an eight TO-247 transistor half-bridge, with four transistors of each side of the half-bridge. The transistors should have a positive temperature coefficient to share current more equally. The high and low-side gates should have their polarities wired oppositely.

full-bridge-multi - a layout for an eight TO-247 transistor full-bridge, with two transistors on each side of each half bridge. The two high-side gates should have their polarities wired oppositely, the two low-side gates should have their polarities wired oppositely, and the high and low-side gates of each half-bridge should be have their polarities wired oppositely.

Parts

42
QtyValueFootprintReferences
810Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8
8D_SchottkyDiodes_THT:D_DO-41_SOD81_P12.70mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8
8Q_NIGBT_GCETO_SOT_Packages_THT:TO-247_TO-3P_VerticalQ1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
4Conn_01x01Connectors:1pinJ3, J4, J5, J6
4DDiodes_THT:D_DO-201_P15.24mm_HorizontalTVS1, TVS2, TVS3, TVS4
21 uFCapacitors_THT:C_Rect_L28.0mm_W10.0mm_P22.50mm_MKS4C1, C2
2Bridge1Connectors:1pinJ9, J12
2Conn_01x01half_bridge_multi_library:smallpinJ27, J28
2Screw_Terminal_01x02Connectors_Terminal_Blocks:TerminalBlock_bornier-2_P5.08mmJ7, J8
1NegBusConnectors:1pinJ1
1PosBusConnectors:1pinJ2

More from profdc9/DRSSTC-PCB-Pack

10
  • 2 layers96.8 × 97 mmPsoc5power, the printed circuit board in 3D

    Psoc5power

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    133 parts59
  • 2 layers97.5 × 97.5 mmUd29, the printed circuit board in 3D

    Ud29

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    123 parts59
  • 2 layers97.5 × 97.5 mmUd27c, the printed circuit board in 3D

    Ud27c

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    106 parts59
  • 2 layersPsoc5power2, the printed circuit board in 3D

    Psoc5power2

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    93 parts59
  • 2 layers74.4 × 99.3 mmLineinterrupter, the printed circuit board in 3D

    Lineinterrupter

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    85 parts59
  • 2 layers79.2 × 97 mmInterrupter, the printed circuit board in 3D

    Interrupter

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    80 parts59
  • 2 layers96.5 × 98 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    78 parts59
  • 2 layers98.6 × 98.6 mmFull bridge, the printed circuit board in 3D

    Full bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    46 parts59
  • 2 layers97.8 × 98 mmFull bridge, the printed circuit board in 3D

    Full bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    42 parts59
  • 2 layers98.6 × 98.6 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    30 parts59

Similar boards

  • 2 layers30 × 50 mmModuleV400, the printed circuit board in 3D

    ModuleV400

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    42 parts1.1k
  • 2 layers139.7 × 64.8 mmSprig console, the printed circuit board in 3D

    Sprig console

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    42 parts1.1kMIT
  • 2 layers90.5 × 50 mmMain control board, the printed circuit board in 3D

    Main control board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    42 parts1.1k
  • 2 layers67.6 × 30.5 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    42 parts1kGPL-3.0
  • 2 layers190 × 80 mmPcb shield, the printed circuit board in 3D

    Pcb shield

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    42 parts915
  • 2 layers98 × 80 mmMai io, the printed circuit board in 3D

    Mai io

    whowechina/mai_pico

    Pico controller for Maimai

    42 parts475
  • 2 layers50.8 × 90.4 mmOBOGS PANEL, the printed circuit board in 3D

    OBOGS PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    42 parts431

Questions

How big is the Half bridge PCB?

It measures 98.6 × 98.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Half bridge use?

42 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Half bridge KiCad files?

From the profdc9/DRSSTC-PCB-Pack repository on GitHub, at the commit this page was made from: the board is half-bridge-multi/half-bridge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Half bridge design in my own project?

Its repository states no licence, so its author keeps all rights: ask profdc9 before reusing the design.