Skip to the content
2 layers98.6 × 98.6 mmFull bridge, the printed circuit board in 3D

A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

Size
98.6 × 98.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
46
Nets
16
Pads
92
Tracks, vias
124, 4
Pours
8
Routed
Yes
KiCad
KiCad 4
Created
15 Sep 2018
Updated
31 Jul 2024

Overview

Full bridge is an open-source printed circuit board by profdc9, from the profdc9/DRSSTC-PCB-Pack repository on GitHub. It is a 2-layer board of 98.6 × 98.6 mm with 46 parts on 16 nets, routed with 124 tracks and 4 vias.

Its parts include 12 connectors, 8 resistors, 8 diodes, 8 transistors and 2 capacitors. It belongs with the interfaces and adapters boards of this library.

README

README.md

Dual Resonant Solid State Tesla Coil and Solid State Tesla Coil PCB pack. Copyright (C) 2018 by Daniel L. Marks, licensed under the Created Commons CC-BY-SA 4.0.

These are PCBs for use in DRSSTC/SSTC devices. They are projects using the free and open source Kicad software (kicad-pcb.org) version 4.0.7, so these projects may be modified using this software. Each file includes the following:

  1. Kicad project, so it can be modified or improved
  2. PDF Schematic
  3. Bill of materials, to refer to when assembling
  4. PNG circuit board picture, to refer to when assembling
  5. Gerber files

The projects, except for the interrupters, are 100 by 100 mm boards with 90 by 90 mm mounting hole spacing. These boards may be stacked using M3 spacers. Board of this size can often be fabricated for $5 (without shipping) from PCB manufacturers such as Seeedstudio. You can save on shipping per board if you have several of these made at a time, for example, the driver, interrupter, and a bridge board.

The projects are as follows:

ud27c - a through hole version of the Universal Tesla coil driver, version 2.7C. This is based on a design originally by Steve Ward and refined by others including Eric Goodchild and Gao Guangyan. It has substituted the through-hole parts IRF540N/IRF9540N complementary MOSFET pair for the FDD8424H dual MOSFET part. It includes phase lead, unlike the Universal Driver v1.3.

ud29 - an experimental version of ud27c that includes skip pulse functionality. Pulse skip is enabled or disabled using a jumper, so it may be used as a normal DRSSTC controller. The board has been built and worked for my coil.

PSoc5-power - a through-hole version of the Universal Driver 3 by Steve Ward and Jens Kerrinnes based on the PSoC5 system-on-chip. This includes the functionality for temperature, bus voltage, and bus current sensing. This is experimental. It uses the CYC8KIT-059 dev board plugged into the PCB using pin header sockets.

interrupter - a DRSSTC interrupter based on Steve Ward's burst mode interrupter. It includes a place for the IFE97 LED optical fiber transmission unit. The ability to include an external pulse trigger signal has been included for use with audio sources. Also includes a spot on the board for a OneTesla ATTINY85-based MIDI interrupter which may be flashed with the OneTesla code through the ICSP interface.

lineinterrupter - an experimental interrupter that interrupts on the peak of the AC cycle. Interrupting only at the peak of the AC cycle is intended to improve the power factor by minimizing the inrush of current into the bus capacitors as the magnitude of the voltage increases.

NOTE: You need to flash the included firmware on your ATTINY85 for the MIDI interrupter to work. Instructions are in the folder "oneTesla-usbInterrupter-software".

half-bridge-sstc - a half-bridge/full-bridge driver designed by myself that can either self-oscillate, or take an extetrnal antenna input from a Solid State Tesla Coil. It includes overcurrent and undervoltage protection.

half-bridge-transistor - a layout for a two TO-247 transistor half-bridge that includes an area for the capacitor divider network. Note the polarity on the gates indicated on the silkscreening always indicates the negative and positive voltage side of the gate; wire the phases of the gates accordingly (oppositely in this case). This convention is followed for all of the layouts. Space is included for both supply bypass/DC Link capacitors and snubber capacitors.

full-bridge-transistor - a layout for a four TO-247 transistor full-bridge. Space is included for supply bypass DC/Link capacitors and snubber capacitors. The two high-side gates should have their polarities wired oppositely, the two low-side gates should have their polarities wired oppositely, and the high and low-side gates of each half-bridge should be have their polarities wired oppositely.

half-bridge-multi - a layout for an eight TO-247 transistor half-bridge, with four transistors of each side of the half-bridge. The transistors should have a positive temperature coefficient to share current more equally. The high and low-side gates should have their polarities wired oppositely.

full-bridge-multi - a layout for an eight TO-247 transistor full-bridge, with two transistors on each side of each half bridge. The two high-side gates should have their polarities wired oppositely, the two low-side gates should have their polarities wired oppositely, and the high and low-side gates of each half-bridge should be have their polarities wired oppositely.

Parts

46
QtyValueFootprintReferences
810Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8
8D_SchottkyDiodes_THT:D_DO-41_SOD81_P12.70mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8
8Q_NIGBT_GCETO_SOT_Packages_THT:TO-247_TO-3P_VerticalQ1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
4Conn_01x01Connectors:1pinJ3, J4, J5, J6
4DDiodes_THT:D_DO-201_P15.24mm_HorizontalTVS3, TVS4, TVS7, TVS8
4DDiodes_THT:D_DO-41_SOD81_P10.16mm_HorizontalTVS1, TVS2, TVS5, TVS6
4Screw_Terminal_01x02Connectors_Terminal_Blocks:TerminalBlock_bornier-2_P5.08mmJ7, J8, J9, J10
21 uFCapacitors_THT:C_Rect_L28.0mm_W10.0mm_P22.50mm_MKS4C1, C2
1Bridge1Connectors:1pinJ12
1Bridge2Connectors:1pinJ11
1NegBusConnectors:1pinJ1
1PosBusConnectors:1pinJ2

More from profdc9/DRSSTC-PCB-Pack

10
  • 2 layers96.8 × 97 mmPsoc5power, the printed circuit board in 3D

    Psoc5power

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    133 parts59
  • 2 layers97.5 × 97.5 mmUd29, the printed circuit board in 3D

    Ud29

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    123 parts59
  • 2 layers97.5 × 97.5 mmUd27c, the printed circuit board in 3D

    Ud27c

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    106 parts59
  • 2 layersPsoc5power2, the printed circuit board in 3D

    Psoc5power2

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    93 parts59
  • 2 layers74.4 × 99.3 mmLineinterrupter, the printed circuit board in 3D

    Lineinterrupter

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    85 parts59
  • 2 layers79.2 × 97 mmInterrupter, the printed circuit board in 3D

    Interrupter

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    80 parts59
  • 2 layers96.5 × 98 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    78 parts59
  • 2 layers97.8 × 98 mmFull bridge, the printed circuit board in 3D

    Full bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    42 parts59
  • 2 layers98.6 × 98.6 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    42 parts59
  • 2 layers98.6 × 98.6 mmHalf bridge, the printed circuit board in 3D

    Half bridge

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    30 parts59

Similar boards

  • 2 layers83.3 × 65.3 mmSimonShield, the printed circuit board in 3D

    SimonShield

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    46 parts14kMIT
  • 2 layers27.8 × 22.3 mmAudio, the printed circuit board in 3D

    Audio

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    46 parts4.3kMIT
  • 2 layers370 × 11 mmDaylight XXL, the printed circuit board in 3D

    Daylight XXL

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    46 parts1.1kGPL-3.0
  • 2 layers87.5 × 50 mmMesabob, the printed circuit board in 3D

    Mesabob

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    46 parts990GPL-3.0
  • 2 layers38.8 × 62.5 mmESPAudio, the printed circuit board in 3D

    ESPAudio

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    46 parts915
  • 2 layers53.2 × 24.8 mmPicoLink, the printed circuit board in 3D

    PicoLink

    ErichStyger/mcuoneclipse

    McuOnEclipse projects and examples

    46 parts765
  • 2 layers23 × 29 mmESP32-epaper adapter, the printed circuit board in 3D

    ESP32-epaper adapter

    pcbreflux/espressif

    all espressif stuff will committed here

    46 parts608GPL-3.0
  • 2 layers25.5 × 73.5 mmTERES PCB2-IO Rev.B, the printed circuit board in 3D

    TERES PCB2-IO Rev.B

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    46 parts578Apache-2.0

Questions

How big is the Full bridge PCB?

It measures 98.6 × 98.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Full bridge use?

46 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Full bridge KiCad files?

From the profdc9/DRSSTC-PCB-Pack repository on GitHub, at the commit this page was made from: the board is full-bridge-multi/full-bridge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Full bridge design in my own project?

Its repository states no licence, so its author keeps all rights: ask profdc9 before reusing the design.