2 layers50.8 × 28.6 mm
Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.
20 parts60GPL-3.0
2 layers42.2 × 77.2 mm
Greenhouse
probablythomas/greenhouse_hwKiCad design for automated greenhouse
- Size
- 42.2 × 77.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 35
- Pads
- 66
- Tracks, vias
- 44, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Nov 2017
- Updated
- 18 Nov 2017
Overview
Greenhouse is an open-source printed circuit board by probablythomas, from the probablythomas/greenhouse_hw repository on GitHub. It is a 2-layer board of 42.2 × 77.2 mm with 13 parts on 35 nets, routed with 44 tracks and 0 vias.
It is built around the TL2575-05IN and IRLB8721PBF. Its parts include 3 connectors, 2 capacitors, 2 ICs, 1 resistor and 1 diode.
Main components
2
TL2575-05IN
PDIP-16-40℃~+125℃@(TJ) 1 1A 4.75V~40V 52kHz 5V Buck Buck Built-in Fixed PDIP-16 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
IRLB8721PBF
TO-220AB-55℃~+175℃ 1 N-channel 1.077nF 110pF 13nC@4.5V 16mΩ@4.5V 2.35V 30V 360pF 62A 65W N-Channel ±20V TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdgreenhouse_hw
KiCad design for automated greenhouse
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole_3.2mm_M3_Pad | Mounting_Holes:MountingHole_3.2mm_M3_Pad | , |
| 1 | 100uF | Capacitors_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 10k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1N5819 | Diodes_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 330uF | Capacitors_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 330uH | Inductors_THT:L_Radial_D8.7mm_P5.00mm_Fastron_07HCP | L1 |
| 1 | BarrelJack-Header | Thomas:Barrel_Jack_Pin_Header_Straight_2x03_Pitch2.54mm | J2 |
| 1 | Conn_01x03 | Pin_Headers:Pin_Header_Angled_1x03_Pitch2.54mm | J1 |
| 1 | IRLB8721PBF | Thomas:TO-220-3_Horizontal_NO_HOLE | Q1 |
| 1 | Particle Photon | Thomas:photon_tht | U2 |
| 1 | Screw_Terminal_01x02 | TerminalBlocks_Phoenix:TerminalBlock_Phoenix_PT-3.5mm_2pol | J3 |
| 1 | TL2575-05IN | Housings_DIP:DIP-16_W7.62mm | U1 |
Questions
How big is the Greenhouse PCB?
It measures 42.2 × 77.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Greenhouse use?
13 parts, built around the TL2575-05IN and IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Greenhouse KiCad files?
From the probablythomas/greenhouse_hw repository on GitHub, at the commit this page was made from: the board is Hardware_v1/Greenhouse.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Greenhouse design in my own project?
Its repository states no licence, so its author keeps all rights: ask probablythomas before reusing the design.
Similar boards
- 2 layers99.1 × 99.1 mm
- 2 layers36 × 31 mm
ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers70.3 × 30.2 mm
- 4 layers104.2 × 77.7 mm
- 4 layers69.9 × 44.5 mm
DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT - 2 layers61 × 78.7 mm
- 2 layers33.8 × 49.5 mm
EspAtomizerpcbv3rev1
Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
21 parts1