6 layers53 × 36 mm
8 layers76 × 57 mm
Infrastructure
Pro-engineer616/pcb_projects_Alex1- Size
- 76 × 57 mm
- Copper layers
- 8
- Thickness
- 1.6 mm
- Parts
- 105
- Nets
- 157
- Pads
- 770
- Tracks, vias
- 1,377, 783
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Sep 2024
- Updated
- 4 Dec 2024
Overview
Infrastructure is an open-source printed circuit board by Pro-engineer616, from the Pro-engineer616/pcb_projects_Alex repository on GitHub. It is an 8-layer board of 76 × 57 mm with 105 parts on 157 nets, routed with 1,377 tracks and 783 vias.
It is built around the LTM8064IY#PBF, FS1703-3300-AS and BT16A07, with the IP175G, NCD0603C1 and GSB1C211110DS1HR among its other parts. Its parts include 44 capacitors, 28 resistors, 11 connectors, 9 diodes and 5 ICs.
Main components
11
LTM8064IY#PBF
BGA-108-40℃~+125℃ -6A、9.1A 1 1.2V~36V 11.9mm 16mm 1MHz 4.92mm 6V~58V Short Circuit Protection、Overheat Protection、Programmable output voltage、Light load efficient mode、Programmable soft start、External clock synchronization Step-down type BGA-108 DC-DC Power Modules ROHSAnalog DevicesDC-DC Power ModulesFS1703-3300-AS
SMD-17P,3.3x3.3mmSMD-17P,3.3x3.3mm Power Module/Power Supply ROHSTDKDC-DC Power Modules
BT16A07
SMD1:1 SMD Pulse Transformers(LAN) ROHSTNKPulse Transformers(LAN)
IP175G
QFN-48-EP(6x6)0℃~+70℃ 1024 10BASE-T、100BASE-TX 16 3.3V 5 Yes QFN-48-EP(6x6) Ethernet Switches ROHSIC PlusEthernet Switches
NCD0603C1
0603-30℃~+85℃ 1.6V~2.6V 13mcd 140° 25mA 565nm~578nm 576nm 65mW Discrete Diode Yellow Green 0603 LED Indication - Discrete ROHSFoshan NationStar OptoelectronicsLED Indication - DiscreteGSB1C211110DS1HR
--40℃~+85℃ 16P 5A Black - Power Transformers ROHSAmphenolD-Sub / VGA ConnectorsTFM-103-02-L-DH
-Wire To Board ConnectorSamtec
ESD9B5.0ST5G
SOD-923(0402)-55℃~+125℃ 1 10V 15pF 5V 8.4V 80W@8/20us 80nA 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOD-923(0402) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
QT48A03
SMD0℃~+70℃ 1.5kV 1:1 2 POE SMD Pulse Transformers(LAN) ROHSTNKPulse Transformers(LAN)
TFM-105-02-L-DH
SMD,P=1.27mm,卧贴-55℃~+125℃ 1.27mm 1.27mm 10P 2 250V 2x5P 3.2A 5 Black Phosphor bronze Surface Mount, Right Angle Tin UL94V-0 SMD,P=1.27mm,卧贴 Wire To Board Connector ROHSSamtecWire To Board Connector
TPD4EUSB30DQAR
USON-10(1x2.5)-40℃~+85℃ 0.8pF 45W@8/20us 5.5V 5A@8/20us 7V 8V ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
README
README.mdpcb_projects_Alex
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0201_0603Metric | C21, C44, C45, C48, C53, C54, C55, C56, C57, C58, C59, C60 |
| 7 | NCD0603C1 | LED_SMD:LED_0603_1608Metric | D1, D3, D4, D5, D6, D7, D8 |
| 6 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C34, C35, C36, C37, C38, C64 |
| 6 | 1K | Resistor_SMD:R_0201_0603Metric | R31, R32, R33, R34, R35, R36 |
| 6 | 1nF | Capacitor_SMD:C_1206_3216Metric | C39, C40, C41, C42, C43, C63 |
| 6 | 75 | Resistor_SMD:R_0201_0603Metric | R21, R22, R23, R24, R25, R37 |
| 5 | 22uF | Capacitor_SMD:C_0402_1005Metric | C20, C22, C23, C46, C49 |
| 4 | WA-SMSI_9774XXX360 | 9774120360R:WA-SMSI_9774120360 | MP1, MP2, MP3, MP4 |
| 3 | 1-406541-5 | 1_406541_5:CONN8_406541_TEC | J4, J5, J6 |
| 2 | 0 | Resistor_SMD:R_0201_0603Metric | R26, R29 |
| 2 | 100uF | Capacitor_SMD:C_1210_3225Metric | C5, C10 |
| 2 | 10u | Capacitor_SMD:C_1210_3225Metric | C3, C8 |
| 2 | 130k | Resistor_SMD:R_0201_0603Metric | R1, R5 |
| 2 | 213227-1210 | Library:MOLEX_2132271210 | J1, J9 |
| 2 | 22u | Capacitor_SMD:C_1210_3225Metric | C1, C2 |
| 2 | 30pF | Capacitor_SMD:C_0201_0603Metric | C61, C62 |
| 2 | 330uF | TAJD337K010RNJ:TAJD_AVX | C4, C18 |
| 2 | 47uF | Capacitor_SMD:C_0603_1608Metric | C47, C50 |
| 2 | BLM15BB221SN1D | BLM15BB221SN1D:IND_BLM15_0402_MUR-L | L1, L2 |
| 2 | GSB1C211110DS1HR | GSB1C211110DS1HR:AMPHENOL_GSB1C211110DS1HR | J7, J8 |
| 2 | LTM8064IY#PBF | LTM8064IY_PBF:BGA108_16X11P9_ADI | U1, U2 |
| 2 | TFM-103-02-L-DH | TFM_103_02_L_DH:SAMTEC_TFM-103-02-L-DH | J2, J13 |
| 1 | 100k | Resistor_SMD:R_0201_0603Metric | R8 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric | R15 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C52 |
| 1 | 124k | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | 2.7R | Resistor_SMD:R_0201_0603Metric | R20 |
| 1 | 20k | Resistor_SMD:R_0201_0603Metric | R16 |
| 1 | 25MHZ | TSX-3225_40.0000MF20X-K0:XTAL_TSX-3225_40.0000MF20X-K0 | Y1 |
| 1 | 2M | Capacitor_SMD:C_1206_3216Metric | R9 |
| 1 | 374k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C51 |
| 1 | 470K | Resistor_SMD:R_0201_0603Metric | R27 |
| 1 | 470pF | Capacitor_SMD:C_1206_3216Metric | C14 |
| 1 | 49.9k | Resistor_SMD:R_0201_0603Metric | R19 |
| 1 | 5.11k | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | 5k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 6.2K | Resistor_SMD:R_0201_0603Metric | R28 |
| 1 | BT16A07 | BT16A07:BT16A07 | U5 |
| 1 | ESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D2 |
| 1 | FS1703-3300-AS | FS1703_3300_AS:P11F1_TDK | U3 |
| 1 | IP175G | IP175:IP175G | U4 |
| 1 | QT48A03 | QT48A03:QT48A03 | T1 |
| 1 | TFM-105-02-L-DH | TFM-105-02-L-DH:SAMTEC_TFM-105-02-L-DH | J12 |
| 1 | TFM-108-02-X-DH-XX | TFM-108-02-L-DH:SAMTEC_TFM-108-02-X-DH-XX | J3 |
| 1 | TPD4EUSB30DQAR | TPD4EUSB30DQAR:DQA10 | D9 |
Questions
How big is the Infrastructure PCB?
It measures 76 × 57 mm and has 8 copper layers, 1.6 mm thick.
What parts does the Infrastructure use?
105 parts, built around the LTM8064IY#PBF, FS1703-3300-AS, BT16A07 and IP175G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Infrastructure KiCad files?
From the Pro-engineer616/pcb_projects_Alex repository on GitHub, at the commit this page was made from: the board is infrastructure-board/source/infrastructure/infrastructure.kicad_pcb and its schematic PDB v1.1/PDB1.1/source/PDB/Connector_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Infrastructure design in my own project?
Its repository states no licence, so its author keeps all rights: ask Pro-engineer616 before reusing the design.
More from Pro-engineer616/pcb_projects_Alex
7- 4 layers56 × 65.1 mm
- 2 layers56 × 65.1 mm
- 4 layers86.3 × 150 mm
- 4 layers86.3 × 150 mm
- 6 layers86.3 × 149.9 mm
- 2 layers56 × 65.1 mm
Similar boards
- 4 layers44.9 × 42.1 mm
Switch
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
72 parts192MIT - 2 layers180.1 × 180.3 mm
- 2 layers24.3 × 24.8 mm
LimeTK SomeSlime MCU
heronbone/LimeTK_SomeSlime-MCU
A hardware design(PCB only) for SlimeVR Tracker
18 parts1CERN-OHL-W-2.0 - 4 layers101.6 × 128.7 mm
- 2 layers50 × 50 mm
50x50 2 Layer
UC-Aerospace/Electrical-Tut-26
2026 Avionics tutorial example boards for UC Aerospace
49 parts - 6 layers203 × 151.8 mm
PDNode Baseboard
DvidMakesThings/HW_PDNode-600-Pro
The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.
236 parts86AGPL-3.0 - 2 layers55 × 40 mm
- 6 layers76 × 56 mm
CM4 MANET
ties1887/Mesh-radio-Halow-LoRa
Modular mesh radio system using Raspberry Pi + HaLow (802.11ah) + LoRa.
122 parts40