
SP110Duo
printsmith/keyboards
Custom keyboard featuring a modified Southpaw 1800 layout with 2 nav clusters, LCD display and rotary encoders.

Custom keyboard featuring a modified Southpaw 1800 layout with 2 nav clusters, LCD display and rotary encoders.
SP110Duo is an open-source printed circuit board by printsmith, from the printsmith/keyboards repository on GitHub. It is a 2-layer board of 428.7 × 127.4 mm with 257 parts on 260 nets, routed with 1,617 tracks and 53 vias.
It is built around the 74AHC1G125GW, TPS2553DBVR-1 and 1N4148W. Its parts include 110 diodes, 110 switches, 13 capacitors, 7 resistors and 3 ICs. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
Custom keyboard featuring a modified Southpaw 1800 layout with 2 nav clusters, LCD display and rotary encoders.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 110 | 1N4148W | Diode_SMD:D_SOD-123F | D1, D10, D11, D12, D13, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110 +94 |
| 95 | Switch w/LED | KeebLib:Hotswap_MX_Plated_LED_1u | SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW102, SW103, SW104, SW105, SW106, SW107, SW108, SW109, SW110 +79 |
| 10 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 |
| 7 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U_Pad2.25x2.35mm_HandSolder | C7, C8, C9, C10, C11, C12, C13 |
| 5 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5 |
| 5 | 5.1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R4, R5, R6 |
| 4 | Switch w/LED | KeebLib:Hotswap_MX_Plated_LED_1.5u | SW43, SW56, SW97, SW98 |
| 3 | Switch w/LED | KeebLib:Hotswap_MX_Plated_LED_2.25u | SW74, SW80, SW101 |
| 2 | LOGO | Ghoul:QMK_PoweredBy | G***, G*** |
| 2 | Switch w/LED | KeebLib:Hotswap_MX_Plated_LED_2u_90deg | SW39, SW76 |
| 2 | Switch w/LED | KeebLib:Hotswap_MX_Plated_LED_1.75u | SW62, SW91 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 74AHC1G125 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | 75k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | LCD-ST7789-2in | SP110Duo:LCD-ST7789-2in | LCD1 |
| 1 | Raspberry_Pi_Pico | KeebLib:Raspberry_Pi_Pico | U3 |
| 1 | RotaryEncoder_Switch | KeebLib:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_Centred | SW1 |
| 1 | RotaryEncoder_Switch | KeebLib:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_Centred_1 | SW61 |
| 1 | SW_Push | KEEBIO:SW_SPST_TL3342 | RESET1 |
| 1 | Switch w/LED | KeebLib:Hotswap_MX_Plated_LED_2.75u | SW99 |
| 1 | Switch w/LED | KeebLib:Hotswap_MX_Plated_LED_1.25u | SW100 |
| 1 | TPS2553DBVR | Package_TO_SOT_SMD:SOT-23-6 | U1 |

printsmith/keyboards
Custom keyboard featuring a modified Southpaw 1800 layout with 2 nav clusters, LCD display and rotary encoders.


Yusufumben08/My-macropad
first electronics project. I found this last second so i couldnt do much more than this because of the time constraint. Made in 5 hours.

kavanoz64/BeamBender-BigBox
An AGA digital scandoubler and HDMI output card for the Amiga 4000, with Amiga 2000 / 3000 support.


heyitsarthur/Capstone-Project-Smart-glasses-for-the-visually-impaired
The system operates on a distributed architecture split between a head-mounted sensor array and a chest-mounted compute module. Main Computing Unit: Raspberry Pi Compute Module 4 (CM4) running on a custom PCB.


hdh7485/agent-deck
Physical AI agent controller for Codex, Hermes, OMX, and tmux workflows

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 428.7 × 127.4 mm and has 2 copper layers, 1.6 mm thick.
257 parts, built around the 74AHC1G125GW, TPS2553DBVR-1 and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the printsmith/keyboards repository on GitHub, at the commit this page was made from: the board is SP110duo/dev/SP110Duo.kicad_pcb and its schematic SP110duo/dev/SP110Duo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask printsmith before reusing the design.