Princediscjalpha/DIY-PCB-Projects2I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well. You are free to make any further modifications in all these projects either by downloading simply or making them as git repositories on your local machines.
Push Pull amplifier is an open-source printed circuit board by Princediscjalpha, from the Princediscjalpha/DIY-PCB-Projects repository on GitHub. It is a 2-layer board of 53.3 × 61.2 mm with 18 parts on 13 nets, routed with 69 tracks and 0 vias.
It is built around the 2SA1943RTU and 2SC5200. Its parts include 12 resistors, 4 transistors and 2 diodes. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 2 | 2SA1943RTU | Library all:TO545P520X2000X2900-3P | Q1, Q2 |
| 2 | 2SC5200 | Library all:TO545P2020X520X2910-3 | Q3, Q4 |
| 2 | D | Diode_THT:D_5KPW_P7.62mm_Vertical_AnodeUp | D1, D2 |
It measures 53.3 × 61.2 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the 2SA1943RTU and 2SC5200. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Princediscjalpha/DIY-PCB-Projects repository on GitHub, at the commit this page was made from: the board is Push Pull amplifier/Push Pull amplifier.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Princediscjalpha before reusing the design.
Princediscjalpha/DIY-PCB-Projects
I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well.
Princediscjalpha/DIY-PCB-Projects
I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well.
Princediscjalpha/DIY-PCB-Projects
I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well.
Princediscjalpha/DIY-PCB-Projects
I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well.
hnz1102/dcpower
DC Power Unit for Breadboard based on ESP32-S3 microcontroller and AP33772S USB Power Delivery (PD) Sink Controller.
picli3/etapa-potencia-500w
Barra de potencia de audio con múltiples transistores en paralelo, pensada para entregar alta corriente y robustez térmica en amplificadores de gran potencia.
X-ANONYMOUS-POWER-AMPLIFIER/X-B120W-4-LITE
SIMPLE MAIN-CIRCUIT MODULE OF 120 WATTS CLASS-B AUDIO POWER AMPLIFIER MAIN-CIRCUIT FOR 4-OHMS OUTPUT LOAD
X-ANONYMOUS-POWER-AMPLIFIER/X-B350W-4-LITE
SIMPLIFIED MAIN-CIRCUIT MODULE OF 350 WATTS CLASS-B AUDIO POWER AMPLIFIER MAIN-CIRCUIT FOR 4-OHMS OUTPUT LOAD
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
