2 layers52.2 × 52.2 mm
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
30 parts3kApache-2.0
2 layers81 × 81 mm
13A Pro
PRIMogEnitus/13A-Pro13 Keys simple macropad
- Size
- 81 × 81 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 36
- Pads
- 180
- Tracks, vias
- 103, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Aug 2024
- Updated
- 27 Aug 2024
Overview
13A Pro is an open-source printed circuit board by PRIMogEnitus, from the PRIMogEnitus/13A-Pro repository on GitHub, published under the MIT licence. It is a 2-layer board of 81 × 81 mm with 30 parts on 36 nets, routed with 103 tracks and 0 vias.
Its parts include 14 diodes, 1 IC and 1 switch. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.md13A Pro Macropad
A simple 13-keys macropad, created with the aim of maximum functionality with relatively low cost to build,
And yes the "Pro" in the name stands for nothing, i typed it wrong, and i'm too lazy to change everything again.
Features
13A Pro features small and compact size to carry almost anywhere without sacrificing its functionality, the main downside is that the 13A Pro doesn't have a soft reset key, despite that as it's using Arduino as the MCU, the layout is customizable depending on needs.
Layout
Standard layout for the 13A Pro (the first layer is the top legends, where the second layer is the bottom legends)
DISCLAIMER
The 13A Pro macropad hasn't tested yet, so if you decide to build one, then proceed at your own risk.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14 |
| 14 | MX_SW_HS | marbastlib-mx:SW_MX_HS_1u | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8, MX9, MX10, MX11, MX12, MX13, MX14 |
| 1 | ProMicro | marbastlib-xp-promicroish:ProMicro_USBup | U1 |
| 1 | SW_Push | Switches:TACTILE_SWITCH_SMD_6.0X3.5MM | SW1 |
Questions
How big is the 13A Pro PCB?
It measures 81 × 81 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 13A Pro use?
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 13A Pro KiCad files?
From the PRIMogEnitus/13A-Pro repository on GitHub, at the commit this page was made from: the board is 13A-Pro.kicad_pcb and its schematic 13A-Pro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 13A Pro design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers40.6 × 15.2 mm
- 2 layers270 × 11 mm
Daylight
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
30 parts1.1kGPL-3.0 - 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
30 parts1kGPL-3.0 - 2 layers40.5 × 58 mm
Initial v
tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim
30 parts1kApache-2.0 - 2 layers34.3 × 41.8 mm
MotionCubeViewAllForces
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
30 parts915 - 2 layers57.4 × 62 mm
- 2 layers52.1 × 46.8 mm
