2 layers40 × 30 mm
2 layers170 × 100 mm
Tyrell
prcutler/tyrell-pcbPCB Design files for a carrier PCB for the Adafruit Tyrell Synth project
- Size
- 170 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 28
- Pads
- 42
- Tracks, vias
- 42, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Sep 2024
- Updated
- 19 Sep 2024
Overview
Tyrell is an open-source printed circuit board by prcutler, from the prcutler/tyrell-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 170 × 100 mm with 3 parts on 28 nets, routed with 42 tracks and 0 vias.
Its parts include 2 connectors and 1 IC. It belongs with the RP2040 boards of this library.
README
README.mdtyrell-pcb
PCB Design files for a carrier PCB for the Adafruit Tyrell Desktop Synthesizer project.
Hardware needed:
- Adafruit rp2040 Feather - $12
- PCM5102A I2S DAC - 3 for $15 (affiliate link)
- Copper foil tape with conductive adhesive - $5
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Adafruit-Feather-RP2040 | Module:Adafruit_Feather | U1 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Horizontal | J1 |
Questions
How big is the Tyrell PCB?
It measures 170 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tyrell use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tyrell KiCad files?
From the prcutler/tyrell-pcb repository on GitHub, at the commit this page was made from: the board is tyrell.kicad_pcb and its schematic tyrell.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tyrell design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT