2 layers
2 layers
Stuff related to Hyperloop
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 49
- Pads
- 80
- Tracks, vias
- 71, 9
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Nov 2021
- Updated
- 17 Aug 2022
Overview
Stm2 is an open-source printed circuit board by prateekgargX, from the prateekgargX/Hyperloop repository on GitHub. It is a 2-layer board with 8 parts on 49 nets, routed with 71 tracks and 9 vias.
It is built around the STM32L451CEU6, ADS1115BQDGSRQ1 and TMP116NAIDRVR. Its parts include 3 resistors, 3 ICs, 1 capacitor and 1 connector. It belongs with the STM32 boards of this library.
Main components
3
STM32L451CEU6
UFQFPN-48(7x7)-40℃~+85℃ 1.71V~3.6V 12bit 12bit 160KB 32 Bit 38 512KB 80MHz ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
ADS1115BQDGSRQ1
VSSOP-10-0.5mm-40℃~+125℃ 16 1LSB 1MHz 2 2V~5.5V 500nA 5ppm/℃ 6.144V 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
TMP116NAIDRVR
WSON-6-EP(2x2)-55℃~+125℃ 1.9V~5.5V 15.5ms 16bit 2.1uA Factory temperature calibration、Temperature threshold monitoring、Low-power standby、On-chip non-volatile parameter storage、On-chip digital filtering/averaging I2C、SMBus ±0.3℃ WSON-6-EP(2x2) Temperature Sensors ROHSTexas InstrumentsTemperature Sensors
README
README.mdHyperloop
Stuff I did as Jr. Controls Engineer at Hyperloop IITB
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 5K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | ADS1115BQDGSRQ1 | ADS1115BQDGSRQ1:SOP50P490X110-10N | U2 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | STM32L451CEU6 | STM32L451CEU6:QFN50P700X700X60-49N | U1 |
| 1 | TMP116NAIDRVR | TMP116NAIDRVR:SON65P200X200X80-7N | U3 |
Questions
What parts does the Stm2 use?
8 parts, built around the STM32L451CEU6, ADS1115BQDGSRQ1 and TMP116NAIDRVR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm2 KiCad files?
From the prateekgargX/Hyperloop repository on GitHub, at the commit this page was made from: the board is Controller/stm2/stm2.kicad_pcb and its schematic 555-timer/555timer/555timer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask prateekgargX before reusing the design.
More from prateekgargX/Hyperloop
2- 2 layers33 × 35.6 mm
Similar boards
- 4 layers101 × 175 mm
- 2 layers177.8 × 175.3 mm
- 4 layers100 × 176.5 mm
Elevation Pivot Daughter Board
mauro-starspec/Elevation_Pivot_Daughter-Board
KiCad 9 daughter board for the Starspec elevation/pivot controller.
263 parts - 2 layers67.3 × 48.9 mm
Prelim Prototype Design
rdi-wang/AeroTEC_Capstone_SHMS_Prototype
Prototype PCB for Structural Health Monitoring System (SHMS)
29 parts - 4 layers150 × 83 mm
Masthead Controller
Tuskar-Marine/hardware
All tools for the Mermaid's Rest open sailing tools
230 parts6 - 2 layers20.5 × 24.8 mm
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k