Skip to the content
2 layers67.3 × 48.9 mmPrelim Prototype Design, the printed circuit board in 3D

Prototype PCB for Structural Health Monitoring System (SHMS)

Size
67.3 × 48.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
29
Pads
84
Tracks, vias
129, 6
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
25 Mar 2026
Updated
25 Mar 2026

Overview

Prelim Prototype Design is an open-source printed circuit board by rdi-wang, from the rdi-wang/AeroTEC_Capstone_SHMS_Prototype repository on GitHub. It is a 2-layer board of 67.3 × 48.9 mm with 29 parts on 29 nets, routed with 129 tracks and 6 vias.

It is built around the TDN 1-1211WI, TDN 1-1219WI and ADS1115BQDGSRQ1, with the ISO1540DR-HXY among its other parts. Its parts include 8 capacitors, 8 resistors, 6 ICs and 1 connector.

Main components

4

README

README.md

Preliminary prototype PCB for use in a UAV's Structural Health Monitoring System (SHMS)

Employs strain gauge and wheatstone bridge to read deformities along a wing's surface Data is read by external TNSY microcontroller

GNDs are separated to isolate microcontroller/avionics systems from strain gauge system

Parts

29
QtyValueFootprintReferences
41uFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1, C2, C6, C7
4350Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P5.08mm_VerticalR5, R6, R7, R8
44700Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P5.08mm_VerticalR1, R2, R3, R4
20.1 uFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC4, C5
20.1uFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC3, C8
111.1VConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1
17.4VConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT2
1ADS1115BQDGSRQ1ADC ADS1115:DGS0010A_NU6
1Conn_01x08_MountingPinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1
1ISO1540DRI2C Isolator:D0008A_NU3
1LT1460GCZ-5-PBF5v Ref:TO-92_Z_LITU2
1LT1460JCS3-3.3-TRMPBF3v3 Ref:SOT-23_S3_LITU5
1TDN_1-1211WI9v Iso Reg:CONV_TDN_1-1219WIU4
1TDN_1-1219WI9v Iso Reg:CONV_TDN_1-1219WIU1

The 25 most common of 29 parts.

Similar boards

  • 4 layers100 × 176.5 mmElevation Pivot Daughter Board, the printed circuit board in 3D

    Elevation Pivot Daughter Board

    mauro-starspec/Elevation_Pivot_Daughter-Board

    KiCad 9 daughter board for the Starspec elevation/pivot controller.

    263 parts
  • 4 layers101 × 175 mmPower PCB, the printed circuit board in 3D

    Power PCB

    ICRS/IPRL-Electronics-Hardware

    96 parts1
  • 2 layers177.8 × 175.3 mmArmatron power board, the printed circuit board in 3D

    Armatron power board

    feoranis26/armatron_pcb

    PCB prototype files for ARMATRON

    249 parts
  • 4 layers150 × 83 mmMasthead Controller, the printed circuit board in 3D

    Masthead Controller

    Tuskar-Marine/hardware

    All tools for the Mermaid's Rest open sailing tools

    230 parts6
  • 2 layersStm2, the printed circuit board in 3D

    Stm2

    prateekgargX/Hyperloop

    Stuff related to Hyperloop

    8 parts
  • 2 layers118.7 × 100.1 mmPowerBoard 1, the printed circuit board in 3D

    PowerBoard 1

    arneman44/Modular-Lab-PowerSupply

    The STM32 project are build with cubeMX with as toolchain makefile. I use vscode with STM32-for-vscode to build it

    166 parts1
  • 2 layers200 × 120 mmKinetic pcb, the printed circuit board in 3D

    Kinetic pcb

    Game-Team-SLSC/eurobot-2026-robot

    The repo for firmware and hardware and docs of the 2026 Game Team's robot for CDFR Junior

    229 partsMIT

Questions

How big is the Prelim Prototype Design PCB?

It measures 67.3 × 48.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Prelim Prototype Design use?

29 parts, built around the TDN 1-1211WI, TDN 1-1219WI, ADS1115BQDGSRQ1 and ISO1540DR-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Prelim Prototype Design KiCad files?

From the rdi-wang/AeroTEC_Capstone_SHMS_Prototype repository on GitHub, at the commit this page was made from: the board is Prelim_Prototype_Design.kicad_pcb and its schematic Prelim_Prototype_Design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Prelim Prototype Design design in my own project?

Its repository states no licence, so its author keeps all rights: ask rdi-wang before reusing the design.