2 layers60 × 50 mm
Rj45can power
ppetr/home-automation-CAN
SW and HW for an inexpensive home automation communication network based on the CAN bus
53 parts2Apache-2.0
2 layers42 × 42 mm
SW and HW for an inexpensive home automation communication network based on the CAN bus
- Size
- 42 × 42 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 10
- Pads
- 64
- Tracks, vias
- 223, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Sep 2020
- Updated
- 7 Oct 2020
Overview
Split is an open-source printed circuit board by ppetr, from the ppetr/home-automation-CAN repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 42 × 42 mm with 12 parts on 10 nets, routed with 223 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
README
rpi-hat/README.mdUniversal Raspberry Pi CAN Hat board
Provides CAN interface using the standard D-sub DE-9 connector and our custom RJ-45 connector.
The board should comply to the requirements stated in https://github.com/raspberrypi/hats. If you encounter any violation or deviation, please open an issue.
The schema is loosely based on https://www.disk91.com/2015/technology/hardware/design-a-raspberry-pi-hat-shield/
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | NoSocket | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 4 | RJ45_Shielded | Connector_RJ:RJ45_Ninigi_GE | J1, J2, J3, J4 |
More from ppetr/home-automation-CAN
2- 2 layers65 × 56.5 mm
Rpi hat
ppetr/home-automation-CAN
SW and HW for an inexpensive home automation communication network based on the CAN bus
31 parts2Apache-2.0
Similar boards
- 2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT - 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
How big is the Split PCB?
It measures 42 × 42 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Split use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Split KiCad files?
From the ppetr/home-automation-CAN repository on GitHub, at the commit this page was made from: the board is split/split.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Split design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).