
Panning Mixer
powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

Where I will be collecting documentation for all my synth parts
Rectifier is an open-source printed circuit board by powsplatboom, from the powsplatboom/Synth-DIY repository on GitHub. It is a 2-layer board of 139.7 × 78.7 mm with 23 parts on 8 nets, routed with 151 tracks and 0 vias.
It is built around the GBU8A. Its parts include 12 capacitors, 5 connectors and 2 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10000uf | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 4 | Conn_01x04_Male | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05504HBWC_1x04_P5.00mm_Horizontal | J2, J3, J4, J5 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | m3, m3, m3, m3 |
| 2 | GBU8A | Diode_THT:Diode_Bridge_Vishay_GBU | D1, D2 |
| 1 | Transformer Outputs | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05505HBWC_1x05_P5.00mm_Horizontal | J1 |

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts




google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards




It measures 139.7 × 78.7 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the GBU8A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the powsplatboom/Synth-DIY repository on GitHub, at the commit this page was made from: the board is Completed/Power Supply/Rectifier/Layout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask powsplatboom before reusing the design.