
Try
Ahmed-YSY/FleetGuard
IoT vehicle telematics for fleet & logistics — ESP32 + SIM7600G 4G/GPS tracker with fuel-theft detection, tamper/cargo security alarms, offline-resilient MQTT reporting, and OBD2 data over ESP-NOW.

Pcbbracelet is an open-source printed circuit board by possiblyselena, from the possiblyselena/opensauce-outfit repository on GitHub. It is a 2-layer board of 76 × 29 mm with 5 parts on 21 nets, routed with 48 tracks and 0 vias.
It is built around the ESP32-C3-DEVKITM-1 and SEN0142. Its parts include 1 IC and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LOGO | LOGO | G***, G*** |
| 1 | B2B-PH-K-S_LF__SN_ | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | ESP32-C3-DevKitM-1 | RF_Module:ESP32-C3-DevKitM-1 | U1 |
| 1 | SEN0142 | SEN0142:SEN0142 | M1 |

Ahmed-YSY/FleetGuard
IoT vehicle telematics for fleet & logistics — ESP32 + SIM7600G 4G/GPS tracker with fuel-theft detection, tamper/cargo security alarms, offline-resilient MQTT reporting, and OBD2 data over ESP-NOW.

iho77/ppo_v2
This work is licensed under a [Creative Commons Attribution-NonCommercial 4.0 International License][cc-by-nc].

TiboDevC/clockclock
Personal project of a kinetic clock inspired by Humans Since 1982, using 48 stepper motors to display time in an artistic and dynamic way.

Abineshpk007/KICAD-solar_panel_monitoring_prototype
This is my PCB, there are many outer like it but this is mine

diaxxu/CNC-Router
a challenge i gave myself to make something great ! yes its a cnc milling / laser / plotter machine

saniyafatima07/Hail_Mary
Lakshya: Low Cost Precision Guidance and Smart Electronic Fuze System


VladimirVladimirovMinkov/UOA_HPA
This is a code and document repository for the University of auckland Aeronaughtics Club Human Powered Aircraft
It measures 76 × 29 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the ESP32-C3-DEVKITM-1 and SEN0142. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the possiblyselena/opensauce-outfit repository on GitHub, at the commit this page was made from: the board is headset/pcb/pcbbracelet.kicad_pcb and its schematic headset/pcb/pcbbracelet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask possiblyselena before reusing the design.