6 layers90.2 × 95.9 mm
PiCoral
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
102 parts2
6 layers73.7 × 73.7 mm
Soldermander panelized
polygnomial/adcs2CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
- Size
- 73.7 × 73.7 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 177
- Nets
- 317
- Pads
- 1,033
- Tracks, vias
- 4,098, 512
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Oct 2023
- Updated
- 8 Aug 2024
Overview
Soldermander panelized is an open-source printed circuit board by polygnomial, from the polygnomial/adcs repository on GitHub. It is a 6-layer board of 73.7 × 73.7 mm with 177 parts on 317 nets, routed with 4,098 tracks and 512 vias.
It is built around the EM064LXQADG13IS1T, MT29F1G01ABBFDWB-IT:F and CD40109BQNSRQ1, with the MT48H32M16LFB4-6 IT:C, USBLC6-2SC6 and DF40C-100DP-0.4V(51) among its other parts. Its parts include 68 capacitors, 62 resistors, 10 ICs, 8 connectors and 5 inductors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
7
EM064LXQADG13IS1T
DFN-8(6x8)64Mbit MRAM SPI DFN-8(6x8) Random Access Memory (RAM) ROHSEverspin TechRandom Access Memory (RAM)MT29F1G01ABBFDWB-IT:F
UPDFN-8-40℃~+85℃ 1.7V~1.95V 1Gbit SPI UPDFN-8 NAND FLASH ROHSMicron TechNAND FLASH
CD40109BQNSRQ1
SO-16-208mil-40℃~+125℃ 1 3V~18V 3V~18V 4 Tri-State Unidirectional SO-16-208mil Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
MT48H32M16LFB4-6 IT:C
VFBGA-54(8x8)-40℃~+85℃ 1.7V~1.95V 166MHz 512Mbit 90mA High-speed clock synchronization、Auto precharge、Automatic column address generation、Auto refresh VFBGA-54(8x8) SDRAM ROHSMicron TechSDRAM
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
DF40C-100DP-0.4V(51)
SMD,P=0.4mm-35℃~+85℃ 0.4mm 100P 2 300mA Gold Slot Type Butting Surface Mount,Vertical SMD,P=0.4mm Board-to-Board and Backplane Connector ROHSHirose ElectricBoard-To-Board And Backplane Connector
DLW21HN900SQ2L
SMD-4P,2x1.2mm-40℃~+85℃ 10MΩ 125V 2 330mA 350mΩ 50V 90Ω@100MHz SMD-4P,2x1.2mm Common Mode Filters ROHSMurataCommon Mode Filters
README
README.mdADCS
Docs
- Power Architecture
- RT1170 and RT1060 pin map
- slides and other notes
- Tim's review
- TODO move other notes here
Hardware
Soldermander
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
Sqrt of G
Eventual functional ADCS controller and sensor mainboard that the CPU board will sit on top of
PCBranch
Development breakout board that breaks out all the pins of the RT1170 CPU
Code
flight
Rust code with a Teensy target, RT1170 target (not yet implemented), etc.
cpp-code
Useful for checking that I implemented my Rust drivers correctly
Parts
177| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C10, C25, C28, C31, C34, C69, C70, C71, C72, C73, C74, C75, C84, C85 |
| 13 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C38, C41, C58, C59, C60, C61, C62, C63, C88, C89 |
| 12 | 22kΩ | Resistor_SMD:R_0402_1005Metric | R51, R52, R53, R54, R55, R56, R57, R58, R59, R60, R61, R62 |
| 12 | 47kΩ | Resistor_SMD:R_0402_1005Metric | R37, R38, R39, R40, R41, R42, R43, R44, R45, R46, R47, R48 |
| 11 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C9, C23, C24, C43, C44, C51, C52, C66, C68 |
| 8 | 100kΩ | Resistor_SMD:R_0402_1005Metric | R8, R15, R19, R24, R31, R32, R49, R50 |
| 8 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R3, R4, R7, R12, R16, R17, R21, R33 |
| 8 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C8, C40, C45, C46, C47, C48, C49, C50 |
| 8 | 22uF | Capacitor_SMD:C_0603_1608Metric | C4, C16, C27, C67, C76, C77, C78, C80 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP8, TP9 |
| 4 | Fiducial_1mm_Mask3mm | , , , | |
| 4 | 100uF | Capacitor_SMD:C_1210_3225Metric | C79, C81, C82, C83 |
| 4 | 4.7kΩ | Resistor_SMD:R_0402_1005Metric | R9, R10, R63, R64 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 10pF | Capacitor_SMD:C_0402_1005Metric | C5, C20, C21 |
| 3 | 190mΩ | Fuse:Fuse_0402_1005Metric | FB1, FB2, FB6 |
| 2 | Fiducial_1.5mm_Mask3mm | , | |
| 2 | 0.22uF | Capacitor_SMD:C_0402_1005Metric | C14, C29 |
| 2 | 0Ω | Resistor_SMD:R_0402_1005Metric | R2, R26 |
| 2 | 22.1kΩ | Resistor_SMD:R_0402_1005Metric | R29, R30 |
| 2 | 3.3nF | Capacitor_SMD:C_0402_1005Metric | C86, C87 |
| 2 | 3.3uH | Inductor_SMD:L_1210_3225Metric | L3, L4 |
| 2 | 30kΩ | Resistor_SMD:R_0402_1005Metric | R11, R34 |
| 2 | 33k | Resistor_SMD:R_0402_1005Metric | R18, R20 |
| 2 | 353620650 | mainboard:MOLEX_35362-0650 | J2, J4 |
| 2 | 5.1kΩ | Resistor_SMD:R_0402_1005Metric | R22, R23 |
| 2 | 8pF | Capacitor_SMD:C_0402_1005Metric | C18, C19 |
| 2 | DF40C-100DP-0.4V(51) | adcs:DF40C100DP04V51 | J6, J7 |
| 2 | TPS54226PWPRPWP14_2P31X2P46-L | mainboard:PWP14_2P31X2P46-L | U7, U8 |
| 1 | 1.27MΩ | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10mΩ | Resistor_SMD:R_2512_6332Metric | R1 |
| 1 | 18kΩ | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | 2.2MΩ | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 24.0mHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 30.1kΩ | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y3 |
| 1 | 330uH | adcs:IND_SRN6045TA-331K | L1 |
| 1 | 4.7K - DNP | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 4.7µH | adcs:IND_4x4mm | L5 |
| 1 | 73.2kΩ | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 806kΩ | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | CD40109BQNSRQ1 | adcs:NS16 | U10 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | DLW21HN900SQ2L | adcs:IND4_CHOKE_0805 | L2 |
| 1 | EM064LXQADG13IS1T | adcs:SON127P800X600X95-9N-D | U3 |
| 1 | JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | LOGO | adcs:grace_skate | G*** |
| 1 | LT3014IS5-TRMPBF | adcs:S_5_ADI | U9 |
| 1 | MIMXRT1176 | adcs:U_MIMXRT1176DVMAA_NXP | U2 |
| 1 | MT29F1G01ABBFDWB | adcs:UDFN800X600X65-8 | U4 |
| 1 | MT48H32M16LFB4-6 | adcs:VFBGA54_8X8_MRN | U6 |
| 1 | SAMTEC-FTS-105-03-X-DV | adcs:SAMTEC-FTS-105-03-X-DV | J8 |
| 1 | SWITCH_SMT4.6X2.8 | mainboard:BTN_KMR2_4.6X2.8 | SW1 |
| 1 | SW_DIP_x04 | adcs:SW-SMD_8P-L6.7-W5.4-P1.27-LS8.5 | SW3 |
| 1 | SW_DIP_x10 | adcs:SW-SMD_DSHP10TS-S | SW2 |
| 1 | TPS16630PWPR | adcs:HTSSOP20_PWP_TEX | U1 |
| 1 | USBLC6-2SC6 | adcs:SOT23-6L_STM | U5 |
| 1 | USB_C_pycubed | mainboard:USB_C_Receptacle_XKB_U262-161N-4BVC11 | J1 |
Questions
How big is the Soldermander panelized PCB?
It measures 73.7 × 73.7 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Soldermander panelized use?
177 parts, built around the EM064LXQADG13IS1T, MT29F1G01ABBFDWB-IT:F, CD40109BQNSRQ1 and MT48H32M16LFB4-6 IT:C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Soldermander panelized KiCad files?
From the polygnomial/adcs repository on GitHub, at the commit this page was made from: the board is hardware/cpu_board/Production/Soldermander_panelized.kicad_pcb and its schematic hardware/adcs_with_coral/PiCoral.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Soldermander panelized design in my own project?
Its repository states no licence, so its author keeps all rights: ask polygnomial before reusing the design.
More from polygnomial/adcs
5- 4 layers90.2 × 95.9 mm
Sqrt of g
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
77 parts2 - 2 layers46.3 × 46.3 mm
PCBassProShop
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
22 parts2 - 4 layers90.2 × 95.9 mm
PCBranch
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
15 parts2 - 4 layers90.2 × 95.9 mm
PrintedCoralBoard
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
14 parts2
Similar boards
- 2 layers138 × 53 mm
- 4 layers61.5 × 77.7 mm
HEI Logic
bbassett6/HighEfficiencyInverter
documentation and files for the high efficiency inverter senior design project
99 parts - 4 layers91.5 × 51.5 mm
Krishveercard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915 - 2 layers85.8 × 137 mm
Diseño esquematico Garra
gonblas/blitzcrank
Blitzcrank es un prototipo de garra robótica móvil controlada manualmente, capaz de desplazarse en los ejes X e Y mediante rieles y de realizar movimientos de subida, bajada, apertura y cierre para la manipulación de…
196 parts2GPL-3.0 - 4 layers61.9 × 84.4 mm
FastStepper
harp-tech/device.faststepper
A fast moving stepper motor controller device, with acceleration, jerk control, and end stop support
141 parts - 4 layers166.6 × 77.8 mm
- 4 layers143.1 × 150.7 mm
- 8 layers65 × 30 mm
