6 layers73.7 × 73.7 mm
Soldermander panelized
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
177 parts2
4 layers90.2 × 95.9 mm
PrintedCoralBoard
polygnomial/adcs2CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
- Size
- 90.2 × 95.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 138
- Pads
- 408
- Tracks, vias
- 1,112, 152
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Oct 2023
- Updated
- 8 Aug 2024
Overview
PrintedCoralBoard is an open-source printed circuit board by polygnomial, from the polygnomial/adcs repository on GitHub. It is a 4-layer board of 90.2 × 95.9 mm with 14 parts on 138 nets, routed with 1,112 tracks and 152 vias.
README
README.mdADCS
Docs
- Power Architecture
- RT1170 and RT1060 pin map
- slides and other notes
- Tim's review
- TODO move other notes here
Hardware
Soldermander
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
Sqrt of G
Eventual functional ADCS controller and sensor mainboard that the CPU board will sit on top of
PCBranch
Development breakout board that breaks out all the pins of the RT1170 CPU
Code
flight
Rust code with a Teensy target, RT1170 target (not yet implemented), etc.
cpp-code
Useful for checking that I implemented my Rust drivers correctly
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_02x25_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x25_P2.54mm_Vertical | J4, J5, J6, J7 |
| 4 | MountingHole_Pad | adcs:CoralLandingPad | H1, H2, H3, H4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H5, H6, H7, H8 |
| 2 | DF40HC_3.0_-100DS-0.4V_51_ | adcs:DF40HC30100DS04V51 | J1, J2 |
More from polygnomial/adcs
5- 6 layers90.2 × 95.9 mm
PiCoral
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
102 parts2 - 4 layers90.2 × 95.9 mm
Sqrt of g
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
77 parts2 - 2 layers46.3 × 46.3 mm
PCBassProShop
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
22 parts2 - 4 layers90.2 × 95.9 mm
PCBranch
polygnomial/adcs
CPU (RT1170) + RAM (MRAM - SEMC and xSPI) + power breakout board, with 2x 100-pin board to board connectors.
15 parts2
Similar boards
- 4 layers15.2 × 9 mm
Sensors
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
14 parts3.8kApache-2.0 - 4 layers25.5 × 46.5 mm
TremorWatch
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 4 layers81 × 46 mm
XTMAX PCB
MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.
14 parts534 - 4 layers22 × 42 mm
- 4 layers64 × 46.5 mm
DSC Scan Selector
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
14 parts371 - 4 layers65.2 × 61.4 mm
Pi 400 gpio breakout
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
14 parts253GPL-3.0 - 4 layers20 × 23 mm
- 4 layers
Trill ring
BelaPlatform/Trill
Trill sensors are designed to bring beautiful touch interaction to digital projects. Trill sensors are available now on the Bela Shop and via Mouser Electronics.
14 parts77
Questions
How big is the PrintedCoralBoard PCB?
It measures 90.2 × 95.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PrintedCoralBoard use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PrintedCoralBoard KiCad files?
From the polygnomial/adcs repository on GitHub, at the commit this page was made from: the board is hardware/coral_breakout_board/PrintedCoralBoard.kicad_pcb and its schematic hardware/adcs_with_coral/PiCoral.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PrintedCoralBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask polygnomial before reusing the design.