
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

This PCB can't work alone, it needs a few Components soldered on it: - D24V25F7 converter - 1x 22-03-5035 connectors at the top to connect a DXL module - 2x 532530370 connectors at the bottom to connect 2x XL-320 motors
7V converter is an open-source printed circuit board by pollen-robotics, from the pollen-robotics/7V_converter repository on GitHub. It is a 2-layer board of 18 × 35 mm with 7 parts on 4 nets, routed with 3 tracks and 0 vias.
This repository contains the KiCad project of the board used to convert the 12V power of the Reachy robot to 7.5V to power the motors of the head.

This PCB can't work alone, it needs a few Components soldered on it:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole | MountingHole:MountingHole_2.5mm_Pad | H1, H2 |
| 1 | Converter | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | DXL_In | Common_Footprint:XL320_MX | J2 |
| 1 | DXL_Out1 | Common_Footprint:XL320_MX | J3 |
| 1 | DXL_Out2 | Common_Footprint:XL320_MX | J4 |
| 1 | LOGO | Logos:pollen_square_logo | G*** |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 18 × 35 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pollen-robotics/7V_converter repository on GitHub, at the commit this page was made from: the board is 7V_converter/7V_converter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pollen-robotics before reusing the design.