2 layers78.7 × 58.4 mm
2 layers0.6 × 27.9 mm
FAN Light
poljant/FanLightKiCADPCB FanLight
- Size
- 0.6 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 19
- Pads
- 79
- Tracks, vias
- 177, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Nov 2021
- Updated
- 22 Nov 2021
Overview
FAN Light is an open-source printed circuit board by poljant, from the poljant/FanLightKiCAD repository on GitHub, published under the MIT licence. It is a 2-layer board of 0.6 × 27.9 mm with 25 parts on 19 nets, routed with 177 tracks and 12 vias.
It is built around the ESP-12F, HLK-PM01 and AMS1117-3.3, with the BSS138 among its other parts. Its parts include 8 resistors, 5 capacitors, 3 connectors, 2 ICs and 2 diodes. It belongs with the ESP8266 boards of this library.
Main components
4
ESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi Modules
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdFanLightKiCAD
PCB FanLight Płyta PCB do programu FanLight. https://github.com/poljant/FanLight.git W katalogu /GERBER/ pliki do wykonania PCB np. przez JLCPCB.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6, R7, R8 |
| 3 | 100nF | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C3 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 2 | 22uF | Capacitor_SMD:CP_Elec_4x5.7 | C5, C6 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | D | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 2 | RM40P1 | Relay_THT:Relay_Relpol-RM40-1P | K1, K2 |
| 1 | 230VAC | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ESP-12F | ESP8266:ESP-12E_SMDmin | U2 |
| 1 | FAN-Light | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS1 |
Similar boards
- 2 layers66.5 × 49 mm
Rele esp12f
techmiguel/smartRele
Single-channel Wi-Fi relay module based on the ESP-12F (ESP8266) for 110–120 VAC and loads up to 10 A. Open hardware in KiCad 10, ready for full assembly at JLCPCB.
34 partsCERN-OHL-W-2.0 - 2 layers163 × 59.5 mm
STM32 Smart Energy Meter
venkatesh3549/STM32-Based-Smart-Energy-Meter-PCB-Design
ustom 2-layer PCB design for an STM32-based Smart Energy Meter with voltage/current monitoring and Wi-Fi communication, developed using KiCad."
25 parts - 2 layers24 × 57.8 mm
Weather station
mec-kon/weather_station
A simple weather station hardware (pcb files) for recording temperature, humidity, pressure and airquality.
73 parts3GPL-3.0 - 2 layers66 × 55.9 mm
- 2 layers440 × 150 mm
- 2 layers27.5 × 24.8 mm
- 2 layers77 × 77 mm
Questions
How big is the FAN Light PCB?
It measures 0.6 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FAN Light use?
25 parts, built around the ESP-12F, HLK-PM01, AMS1117-3.3 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FAN Light KiCad files?
From the poljant/FanLightKiCAD repository on GitHub, at the commit this page was made from: the board is FAN-Light.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FAN Light design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).