2 layers50.8 × 28.6 mm
Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.
20 parts60GPL-3.0
2 layers69.1 × 69.3 mm
PowerMOSFET3D
poljant/PowerMOSFET3DPrinterUkład zasilający grzałki extrudera i stołu drukarki 3D.
- Size
- 69.1 × 69.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 21
- Pads
- 60
- Tracks, vias
- 136, 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Feb 2018
- Updated
- 28 Feb 2018
Overview
PowerMOSFET3D is an open-source printed circuit board by poljant, from the poljant/PowerMOSFET3DPrinter repository on GitHub, published under the MIT licence. It is a 2-layer board of 69.1 × 69.3 mm with 26 parts on 21 nets, routed with 136 tracks and 2 vias.
It is built around the DF08S and IRLB8721PBF. Its parts include 9 resistors, 5 diodes, 5 connectors, 2 transistors and 1 IC.
Main components
2README
README.mdPowerMOSFET3DPrinter
Układ zasilający grzałki extrudera i stołu drukarki 3D. Wprawdzie takie układy są dostepne w Internecie, ale ja mam wszystkie części, dlatego postanowiłem zrobić własny układ. Mój układ zasila obie grzałki. Część z mniejszym radiatorem do grzałki extrudera, a z większym do grzałki stołu. Wymiary płytki mogłyby być mniejsze, ale wykonany układ daje możliwość założenia większych radiatorów. Zasilanie układu tylko 12V, bo nie planowałem zasilania 24V. Aby korzystać z zasilania 24V (lub innego) dla stołu, można dołożyć kolejną łączówkę. Wtedy trzeba przeciąć sieżkę +12V i podłączyć +24V, a -24V połaczyć z masą -12V. Płytka zaprojektowana jest programem KiCad. Można wprowadzić własne zmiany.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R | Resistors_SMD:R_1206_HandSoldering | R5, R6, R7, R8 |
| 3 | 10k | Resistors_SMD:R_1206_HandSoldering | R1, R2, R9 |
| 3 | LED | LEDs:LED_D3.0mm | D3, D4, D5 |
| 3 | Screw_Terminal_1x02 | w_conn_gmkds:gmkds_3-2-5 | J3, J4, J5 |
| 2 | 4k7 | Resistors_SMD:R_1206_HandSoldering | R3, R4 |
| 2 | DF08S | Diodes_SMD:DF08S_Bridge_Gretza_DFS | D1, D2 |
| 2 | IRLB8721PBF | TO_SOT_Packages_THT:TO-220_Vertical | Q1, Q2 |
| 2 | Screw_Terminal_1x02 | Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | J1, J2 |
| 1 | PC827 | Housings_DIP:DIP-8_W7.62mm | U1 |
The 22 most common of 26 parts.
Questions
How big is the PowerMOSFET3D PCB?
It measures 69.1 × 69.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerMOSFET3D use?
26 parts, built around the DF08S and IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerMOSFET3D KiCad files?
From the poljant/PowerMOSFET3DPrinter repository on GitHub, at the commit this page was made from: the board is PowerMOSFET3D.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerMOSFET3D design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers99.1 × 99.1 mm
- 2 layers36 × 31 mm
ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers70.3 × 30.2 mm
- 4 layers104.2 × 77.7 mm
- 4 layers69.9 × 44.5 mm
DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT - 2 layers61 × 78.7 mm
- 2 layers33.8 × 49.5 mm
EspAtomizerpcbv3rev1
Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
21 parts1