4 layers120 × 80 mm
Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
11 parts
2 layers31.5 × 46.3 mm
Airspeed SensorBoard
pms67/Airspeed_SensorBoard17Differential pressure sensor breakout board with STM32 (I2C-to-SPI) interface.
- Size
- 31.5 × 46.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 27
- Pads
- 126
- Tracks, vias
- 239, 27
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Oct 2021
- Updated
- 27 Oct 2021
Overview
Airspeed SensorBoard is an open-source printed circuit board by pms67, from the pms67/Airspeed_SensorBoard repository on GitHub, published under the MIT licence. It is a 2-layer board of 31.5 × 46.3 mm with 43 parts on 27 nets, routed with 239 tracks and 27 vias.
It is built around the SDP810-500PA, HT7533-1(SOT89-3) and PESD5V0L1BA,115-ES, with the B5819W and TC2030-IDC-NL among its other parts. Its parts include 10 capacitors, 10 resistors, 10 diodes, 3 ICs and 2 connectors. It belongs with the STM32 boards of this library.
Main components
5SDP810-500PA
插件-40℃~+85℃ -5hpa~5hpa 1uA 2.7V~5.5V 3ms I2C Negative pressure/vacuum measurement、On-chip temperature compensation、Integrated ADC and digital interface、Standby mode、On-chip temperature output Yes 插件 Differential Pressure Sensor ROHSSensirionPressure Sensors
HT7533-1(SOT89-3)
SOT-89-3-40℃~+125℃ 1 250mA 2uA 3.3V 40V 550mV@(100mA) Fixed Over Current Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHEERMICRUncategorised
PESD5V0L1BA,115-ES
SOD-323-40℃~+125℃ 1 12A 13V 1uA 400W@8/20us 5V 6.5V 60pF Bidirectional IEC 61000-4-2 TVS SOD-323 ESD and Surge Protection (TVS/ESD) ROHSElecSuperESD And Surge Protection (TVS/ESD)
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
TC2030-IDC-NL
UncategorisedTag Connect
README
README.mdAirspeed_SensorBoard
Differential pressure sensor breakout board with STM32 (I2C-to-SPI) interface.
Repo contains all necessary files for ordering this board, including assembly, at JLCPCB.com (https://jlcpcb.com/RHS).
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | PESD5V0L1BA,115 | Diode_SMD:D_SOD-323 | D4, D5, D6, D7, D8, D9, D10 |
| 5 | 22R | Resistor_SMD:R_0402_1005Metric | R6, R7, R8, R9, R10 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C8 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 100R | Inductor_SMD:L_0603_1608Metric | FB1, FB2 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 2k2 | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 510R | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D1 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | Conn_01x10 | Connector_Molex:Molex_PicoBlade_53048-1010_1x10_P1.25mm_Horizontal | J1 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | HT7533-1-SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | LOGO | PhilsLab-KiCad-Footprints:PhilsLab-Silkscreen | G*** |
| 1 | SDP810-500PA | PhilsLab-KiCad-Footprints:SDP810-500PA | U3 |
| 1 | STM32F030F4P6TR | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | TC2030-IDC-NL | PhilsLab-KiCad-Footprints:TC2030-IDC-NL | J2 |
Questions
How big is the Airspeed SensorBoard PCB?
It measures 31.5 × 46.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Airspeed SensorBoard use?
43 parts, built around the SDP810-500PA, HT7533-1(SOT89-3), PESD5V0L1BA,115-ES and B5819W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Airspeed SensorBoard KiCad files?
From the pms67/Airspeed_SensorBoard repository on GitHub, at the commit this page was made from: the board is Airspeed_SensorBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Airspeed SensorBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers52 × 18.5 mm
- 2 layers113.5 × 35 mm
- 4 layers164 × 164 mm
Midi controller
petitechose-midi-studio/hardware
Open-source hardware design files for the MIDI Studio controller.
138 parts1 - 2 layers51 × 46 mm
- 2 layers185 × 60 mm
PI keys
MonkeyCodeMen/ULC-Pico-C-Code
ULC - Pico universal light controller with Rasperry Pico
33 parts1MIT - 4 layers305 × 208.3 mm
- 4 layers34.8 × 36 mm
Atmxt2952td breakout
EvanKrall/ipad_touchscreen_driver
A PCB designed to interface with the iPad (A1219) touchscreen
53 parts7