2 layers63.3 × 50.5 mm
2 layers63.3 × 45.5 mm
Sd bt streamer
pluggee/G3X_SD_BTSD card streamer
- Size
- 63.3 × 45.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 28
- Pads
- 61
- Tracks, vias
- 85, 20
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 Feb 2022
- Updated
- 20 Sep 2022
Overview
Sd bt streamer is an open-source printed circuit board by pluggee, from the pluggee/G3X_SD_BT repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 63.3 × 45.5 mm with 7 parts on 28 nets, routed with 85 tracks and 20 vias.
It is built around the 1040310811, ESP32-C3-DEVKITC-02 and 1N5819HW. Its parts include 2 ICs, 1 diode and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
Main components
3
1040310811
SMD-25℃~+85℃ 1.42mm Connector and Ejector MicroSD Card (TF Card) Push-Pull SMD SD Card / Memory Card Connector ROHSMolexSD Card / Memory Card Connector
ESP32-C3-DEVKITC-02
Through holeThrough hole New Arrivals ROHSEspressif SystemsUncategorised
1N5819HW
SOD-123-65℃~+150℃ 1 Independent 1A 1mA@40V 25A 40V 450mV@1A SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdG3X_SD_BT
SD card streamer
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT3, NT4 |
| 1 | 1N5819HW-7-F | Diode_SMD:D_SOD-123 | D1 |
| 1 | ESP32-C3-DevKitC-02 | Main:ESP32-C3-DevKitC-02 | U2 |
| 1 | Micro_SD_Card_Det | Connector_Card:microSD_HC_Molex_104031-0811 | J1 |
| 1 | SD_MMC_FOOTPRINT | Main:SD_MMC_CARD | U1 |
Questions
How big is the Sd bt streamer PCB?
It measures 63.3 × 45.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sd bt streamer use?
7 parts, built around the 1040310811, ESP32-C3-DEVKITC-02 and 1N5819HW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sd bt streamer KiCad files?
From the pluggee/G3X_SD_BT repository on GitHub, at the commit this page was made from: the board is streamer_ESP32-C3-DevKitC-02/sd_bt_streamer.kicad_pcb and its schematic streamer_ESP32-C3-DevKitC-02/sd_bt_streamer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sd bt streamer design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from pluggee/G3X_SD_BT
2- 2 layers63.3 × 38 mm
Similar boards
- 4 layers90.2 × 95.9 mm
- 4 layers65 × 30 mm
- 2 layers121.5 × 60.5 mm
Remote
ElektroJonas/DIY-Quadcopter
This repository contains the control algorithm for a quadcopter drone on an ESP32 as well as electrical schematics and a pcb design.
24 parts82 - 2 layers52.2 × 43.6 mm
PCB ESP32-C3-DevKitC-02
vives-project-xp/EOMarkers
Develop small standalone boxes that light up when someone approaches them. The boxes can be fitted with a plexi with Electronics-ICT and a direction indication via an arrow.
10 parts3 - 2 layers98.9 × 44.1 mm
Shuttle Tracker Node
wtg/Shuttle-Tracker-Node
Resources, schematics, and other information for Shuttle Tracker Node
27 parts3 - 2 layers27.9 × 62.4 mm
- 2 layers49.2 × 40.2 mm
Pcb 1 new
Haridharan-D/eSim_PCB_Design_Project_Files
Battery-powered ESP32 air quality monitor with a soft power latch, MCP16251 boost converter, and ADS1115 ADC — implemented and simulated in eSim.
20 partsGPL-3.0 - 2 layers49.3 × 66.5 mm
Heishamon lr pdc
lrodorigo/heishamon-lr-aquarea-board
A simple alternative hardware implementation for the great HeishaMon board for communicating with Panasonic heatpumps
30 parts