
CpNode Xiao
plocher/cpNode-Xiao
cpNodes are Arduino-ecosystem nodes created by Model Railroad Control Systems' for the Computer Model Railroad Interface (CMRI) system.

cpNodes are Arduino-ecosystem nodes for the Computer Model Railroad Interface (CMRI) system. The Xiao variations use the ESP32 family of microcontrollers, and communicate with each other and with classic C/MRI nodes via CMRInet. These controllers also support WiFi and Bluetooth for future protocol development.
CpNode Xiao-68x90 is an open-source printed circuit board by plocher, from the plocher/cpNode-Xiao-68x90 repository on GitHub. It is a 2-layer board of 79.8 × 68.8 mm with 40 parts on 37 nets, routed with 269 tracks and 28 vias.
It is built around the MAX3491EPD+, BSS138 and BAT54. Its parts include 9 resistors, 6 connectors, 4 capacitors, 3 diodes and 3 transistors. It belongs with the radio and wireless and interfaces and adapters boards and the ESP32 and RISC-V boards of this library.
cpNodes are Arduino-ecosystem nodes for the Computer Model Railroad Interface (CMRI) system. The Xiao variations use the ESP32 family of microcontrollers, and communicate with each other and with classic C/MRI nodes via CMRInet. These controllers also support WiFi and Bluetooth for future protocol development.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | SPCoast:0603-RES | R8, R9, R21, R22 |
| 2 | 120R | SPCoast:0603-RES | R23, R24 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q8, Q9 |
| 2 | CON_1x-5-3.5-screw | SPCoast:Connector_01x05_V-CMRINET-3.5MM | RS485-3, RS485-4 |
| 2 | Conn_01x02 | SPCoast:Connector_01x02_V | TERM-RX1, TERM-TX1 |
| 2 | Conn_01x07_Socket | SPCoast:PinSocket_1x07_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_8P8C | SPCoast:RJ45_OST_PJ012-8P8CX_Vertical | J4, J5 |
| 1 | ${PROJECTNAME} | SPCoast:SILK_BoardID | DOC1 |
| 1 | 0.01uF | SPCoast:0603-CAP | C4 |
| 1 | 0.1uF | SPCoast:0603-CAP | C2 |
| 1 | 1uF | SPCoast:0603-CAP | C3 |
| 1 | 220uF | SPCoast:CP_Elec_8x10 | C1 |
| 1 | 2k2 | SPCoast:0603-RES | R5 |
| 1 | 330 | SPCoast:0603-RES | R4 |
| 1 | 4k7 | SPCoast:0603-RES | R35 |
| 1 | BAT54 | Package_TO_SOT_SMD:TSOT-23 | D1 |
| 1 | CON_DIP-14 | SPCoast:XS-DIP14 | XS2 |
| 1 | DCJ0202 | Connector_BarrelJack:BarrelJack_Kycon_KLDX-0202-xC_Horizontal | J3 |
| 1 | Green | SPCoast:0603-LED | LED1 |
| 1 | I2C | SPCoast:Connector_I2C-0.100_R | I2C1 |
| 1 | I2C-OLED | SPCoast:Connector_I2C-OLED | I2CLED64 |
| 1 | LM78M05_TO252-2 | Package_TO_SOT_SMD:TO-252-2 | VR5.0 |
| 1 | MAX3491EPD+ | Package_DIP:CERDIP-14_W7.62mm_SideBrazed | U2 |
| 1 | MRCS | SPCoast:SILK_Logo-MRCS | MRCS1 |
| 1 | OSHW | SPCoast:SILK_Label-OSHW | OSHW1 |
| 1 | Q_P-FET_8A_SOP-8_A04443 | Package_SO:HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm | Q1 |
| 1 | Red | SPCoast:0603-LED | LED2 |
| 1 | Vout | SPCoast:Connector_01x04_V | CON2 |
| 1 | XIAO-ESP32-C6 | SPCoast:XIAO-ESP32-C6 | U1 |
| 1 | Yellow | SPCoast:0603-LED | TX0 |
| 1 | ~ | SPCoast:Board_068x80 | BOARD0 |

plocher/cpNode-Xiao
cpNodes are Arduino-ecosystem nodes created by Model Railroad Control Systems' for the Computer Model Railroad Interface (CMRI) system.




wcs3/GPS_CLock
A device that displays time and date on 7-segment displays in ISO8601 format.

jackw01/pi-tin
Open source raspberry pi handheld retro gaming console

Miceuz/i2c-moisture-sensor
I2C based soil moisture sensor
It measures 79.8 × 68.8 mm and has 2 copper layers, 1.6 mm thick.
40 parts, built around the MAX3491EPD+, BSS138 and BAT54. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the plocher/cpNode-Xiao-68x90 repository on GitHub, at the commit this page was made from: the board is cpNode-Xiao-68x90.kicad_pcb and its schematic cpNode-Xiao-68x90.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask plocher before reusing the design.