Skip to the content
4 layers87.6 × 90 mmADCS v1, the printed circuit board in 3D

The Official ADCS Design on PROVES Xmera

Size
87.6 × 90 mm
Copper layers
4
Thickness
2 mm
Parts
103
Nets
127
Pads
433
Tracks, vias
1,245, 131
Pours
4
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
9 Oct 2022
Updated
31 Oct 2022

Overview

ADCS v1 is an open-source printed circuit board by pleiades-cluster, from the pleiades-cluster/Xmera-ADCS repository on GitHub. It is a 4-layer board of 87.6 × 90 mm with 103 parts on 127 nets, routed with 1,245 tracks and 131 vias.

It is built around the STSPIN250, M50-3900842 and M50-3902042. Its parts include 47 resistors, 38 capacitors, 11 ICs and 2 connectors. It belongs with the Raspberry Pi (Linux) boards of this library.

Main components

3

README

README.md

Xmera-ADCS

The Official ADCS Design on PROVES Xmera

ADCS_V1

This was the first version of the ADCS board developed by Rachel Sarmiento and Nicole Maggard. This board was uploaded on 10/12/2022 and is the most relevant and up to date version. This board utilizes a raspberry pi zero for calculations and control. This board includes an embedded Magnetorquer in the inner layers. Parts utilized on V1 include: STSPIN250 (Motor Drivers), PCA9548A (I2C Multiplexer), LIS331LH (6D Orientation IMUs), and LIS3MDL (Magnetometers).

Parts

103
QtyValueFootprintReferences
164k7Resistor_SMD:R_0402_1005MetricR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R18
10100nCapacitor_SMD:C_0402_1005MetricC2, C3, C4, C5, C12, C13, C14, C15, C16, C17
918kResistor_SMD:R_0603_1608MetricR26, R27, R29, R31, R32, R33, R40, R41, R42
622uCapacitor_SMD:C_0805_2012MetricC18, C19, C20, C21, C22, C23
6330Resistor_SMD:R_0402_1005MetricR16, R17, R18, R19, R20, R21
5LOGOLOGOG***, G***, G***, G***, G***
40Resistor_SMD:R_0402_1005MetricR43, R44, R45, R46
410uCapacitor_SMD:C_0603_1608MetricC1, C6, C7, C8
3.33Resistor_SMD:R_0402_1005MetricR22, R23, R24
3100kResistor_SMD:R_0805_2012MetricR25, R28, R30
310nCapacitor_SMD:C_0402_1005MetricC36, C37, C38
31kResistor_SMD:R_0402_1005MetricR37, R38, R39
31nCapacitor_SMD:C_0402_1005MetricC30, C31, C32
31uCapacitor_SMD:C_0402_1005MetricC9, C10, C11
32.2nCapacitor_SMD:C_0402_1005MetricC27, C28, C29
32.2uCapacitor_SMD:C_0603_1608MetricC24, C25, C26
322nCapacitor_SMD:C_0402_1005MetricC33, C34, C35
347kResistor_SMD:R_0805_2012MetricR34, R35, R36
3LIS331DLHTRLIS331DLHTR:LGA-16_3x3x1mm_STMU5, U6, U7
3LIS3MDLTRLIS3MDLTR:LGA-12_2X2X1_STMU2, U3, U4
3STSPIN250STSPIN250:VFQFPN16_STSPIN_STMU8, U9, U10
1M50-3900842SamacSys_Parts:M50-3900842J2
1M50-3902042SamacSys_Parts:M50-3902042J1
1PCA9548AD_118PCA9548AD-118:SO24_SOT137-1_NXPU1
1Raspberry_Pi_Zero_W__v1.3_SamacSys_Parts:RASPBERRYPIZEROWV13IC1

Similar boards

  • 4 layers90 × 87.6 mmProvesXEPS, the printed circuit board in 3D

    ProvesXEPS

    pleiades-cluster/Xmera-EPS

    The Official EPS Design on PROVES Xmera

    135 parts1
  • 4 layers99.8 × 94.6 mmOresat adcs card, the printed circuit board in 3D

    Oresat adcs card

    oresat/oresat-adcs-hardware

    Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers

    598 parts21GPL-2.0
  • 4 layers60 × 60 mmESP32 Robo Dev Board, the printed circuit board in 3D

    ESP32 Robo Dev Board

    Amoskeag/RoboDojo

    Super Cool Small Form Factor Robotics

    72 parts6BSD-2-Clause
  • 4 layers88 × 94.5 mmRT1050, the printed circuit board in 3D

    RT1050

    NortheasternSatelliteLab/ADCS-Camera-Payload-Board

    209 parts2
  • 4 layers115.8 × 104.1 mmKASM PCB REV1, the printed circuit board in 3D

    KASM PCB REV1

    gabeak2/KASM_PCB

    Thesis Project - PCB to drive actuators for the Adaptive Secondary Mirror at Keck

    348 parts
  • 2 layers40 × 16 mmLightsaber, the printed circuit board in 3D

    Lightsaber

    dragonlock2/kicadboards

    Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

    51 parts14Apache-2.0
  • 4 layers99.8 × 94.6 mmOresat adcs card, the printed circuit board in 3D

    Oresat adcs card

    kitspace-test-repos/kicad6-file-collection

    563 partsMIT
  • 4 layers38 × 39 mmCLN17-V1.5, the printed circuit board in 3D

    CLN17-V1.5

    creapunk/CLN-ClosedLoopNemaDriver

    Compact closed-loop stepper motor driver designed for NEMA motors

    103 parts1.1k

Questions

How big is the ADCS v1 PCB?

It measures 87.6 × 90 mm and has 4 copper layers, 2 mm thick.

What parts does the ADCS v1 use?

103 parts, built around the STSPIN250, M50-3900842 and M50-3902042. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ADCS v1 KiCad files?

From the pleiades-cluster/Xmera-ADCS repository on GitHub, at the commit this page was made from: the board is ADCS_V1/ADCS_v1.kicad_pcb and its schematic ADCS_V1/ADCS_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ADCS v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask pleiades-cluster before reusing the design.