2 layers57.3 × 19 mm
2 layers139.7 × 91.4 mm
GullGutter
Plasmarobo/GullGutterAnti-gull device
- Size
- 139.7 × 91.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 25
- Pads
- 122
- Tracks, vias
- 149, 53
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jun 2022
- Updated
- 3 Jul 2022
Overview
GullGutter is an open-source printed circuit board by Plasmarobo, from the Plasmarobo/GullGutter repository on GitHub, published under the MIT licence. It is a 2-layer board of 139.7 × 91.4 mm with 26 parts on 25 nets, routed with 149 tracks and 53 vias.
Its parts include 3 capacitors, 3 connectors, 2 resistors and 1 IC.
README
README.mdGullGutter
Anti-gull device
A device to scare the gulls. Using a Particle Boron as the core and implementing BLE, cellular and automated control. Makes use of a RCWL-0516 doppler radar for detection.
[[assets/Logo.png|ANTI-GULL]]
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | AMPB1, LEFT1, RIGHT1, SOLAR1, TEMP1, TEMP2 |
| 3 | Conn_01x11 | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J1, J2, SOLAR_CTRL1 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1, C3 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | AMPA1, RADAR1 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_PTS645 | RESET1, TEST1 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P20.32mm_Horizontal | R2 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P20.32mm_Horizontal | R1 |
| 1 | Boron | GullGutter:Adafruit_Feather_M0_Wifi | U1 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | BOOST1 |
| 1 | SW_DPDT_x2 | Button_Switch_THT:SW_CuK_JS202011CQN_DPDT_Straight | AMP_SEL1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_CK-JS102011SAQN | UG1 |
The 22 most common of 26 parts.
Questions
How big is the GullGutter PCB?
It measures 139.7 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GullGutter use?
26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GullGutter KiCad files?
From the Plasmarobo/GullGutter repository on GitHub, at the commit this page was made from: the board is hardware/GullGutter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GullGutter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers98 × 59.5 mm
MCP23017 PCB
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
26 parts915 - 2 layers142.9 × 98.5 mm
- 2 layers86.1 × 86.1 mm
- 2 layers103.8 × 50 mm
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers20.3 × 34.8 mm
L0 ESP32
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
26 parts546MIT - 2 layers40.6 × 50.8 mm
WALTsm
google/walt
A device for measuring latency of physical sensors and outputs on phones and computers
26 parts474Apache-2.0 - 2 layers158.5 × 75 mm
