
Cloudfridge
plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
Cloudfridge external is an open-source printed circuit board by plantalytix, from the plantalytix/hardware repository on GitHub. It is a 2-layer board of 66 × 128 mm with 20 parts on 7 nets, routed with 87 tracks and 81 vias.
It is built around the SC-05-E45JH. Its parts include 4 capacitors, 3 connectors, 2 resistors, 1 inductor and 1 fuse.
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
USB-C Programming adapter for all plantalyix devices. Used to flash firmware directly onto the device using the RJ12 connector on the device
Fridgegrow 2.0, multiple boards.
Controller for EC Fans
Controller for dimmable LED lights
Smart socket
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 2 | 100n 310V | Capacitor_THT:C_Rect_L13.0mm_W8.0mm_P10.00mm_FKS3_FKP3_MKS4 | C3, C4 |
| 2 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1, R2 |
| 2 | 47nf 250vac | Capacitor_THT:C_Rect_L18.0mm_W8.0mm_P15.00mm_FKS3_FKP3 | C5, C6 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_RND:TerminalBlock_RND_205-00068_1x03_P7.50mm_Horizontal | J2, J3 |
| 1 | Fuse | Fuse:Fuseholder_Clip-5x20mm_Schurter_OG_Lateral_P15.00x5.00mm_D1.3mm_Horizontal | F1 |
| 1 | SC-05-E45JH | flexogrow:SC-05-E45JH | L1 |
| 1 | Screw_Terminal_01x04 | flexogrow:KF206-7.5 | J1 |
| 1 | Varistor | Varistor:RV_Disc_D15.5mm_W5.9mm_P7.5mm | RV1 |

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.



atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
It measures 66 × 128 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the SC-05-E45JH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the plantalytix/hardware repository on GitHub, at the commit this page was made from: the board is plantalytix-fridgegrow2/connection-box/cloudfridge_external.kicad_pcb and its schematic plantalyitx-programmer/fg_programmer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask plantalytix before reusing the design.