
Minuet
brown-studios/minuet
Minuet upgrades your MAXXAIR Maxxfan with a brushless DC motor, home automation features, and accessories.

A PCB + case for blackbox.hackclub.com
Black box is an open-source printed circuit board by pizzalover125, from the pizzalover125/black-box repository on GitHub. It is a 2-layer board of 84 × 59 mm with 8 parts on 41 nets, routed with 168 tracks and 10 vias.
It is built around the PS1240P02BT. Its parts include 5 switches and 2 ICs. It belongs with the RP2040 boards of this library.
Black Box was a YSWS program ran by @lux in 2025. The premise was simple: 64 LEDs, 5 buttons, and a buzzer. It was a YSWS about limitations. I absolutely LOVED the idea, but never got around to making a Black Box. When fufillment came around, all that was shipped to participants was three breadboards, a bunch of wires, and all the parts to assemble this. I was flabberghasted. All of this money going to breadboards? I knew something had to be done. I made a PCB for #black-box. Read JOURNAL.md for a more detailed story.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5 |
| 1 | 1088AS | Kicad LED Dot Matrix main lib:LED_1088_Pin_Header | U2 |
| 1 | PS1240P02BT | PS1240P02BT Model:XDCR_PS1240P02BT | LS1 |
| 1 | Pico | Module:RaspberryPi_Pico_Common_THT | U1 |

brown-studios/minuet
Minuet upgrades your MAXXAIR Maxxfan with a brushless DC motor, home automation features, and accessories.


walclu/smartReflow
Repository for STM32WB55 based reflow toaster oven controller.

PubInv/general-purpose-alarm-device
A general purpose alarm device (with software) as a module for medical devices (and others)

UBIEEE/FrankenMouse
FrankenMouse is a MicroMouse robot that was designed, built, and programmed from scratch by members of the University at Buffalo's IEEE Student Branch.

FOSSEE/FLOSS-Arduino-Book
Book on Microcontroller Programming with Arduino and FLOSS

Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

V3lectronics/air-quality-station
V Electronics air quality station design files & code
It measures 84 × 59 mm and has 2 copper layers, 1.6 mm thick.
8 parts, built around the PS1240P02BT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pizzalover125/black-box repository on GitHub, at the commit this page was made from: the board is PCB/Untitled.kicad_pcb and its schematic PCB/Untitled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pizzalover125 before reusing the design.