2 layers108 × 93 mm
4 layers76.5 × 75.5 mm
Pinai's PIC18 Development Board
- Size
- 76.5 × 75.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 100
- Pads
- 338
- Tracks, vias
- 912, 57
- Pours
- 330
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Jun 2024
- Updated
- 14 Aug 2024
Overview
PIC18 is an open-source printed circuit board by pixelatedknight27, from the pixelatedknight27/PIC18 repository on GitHub. It is a 4-layer board of 76.5 × 75.5 mm with 75 parts on 100 nets, routed with 912 tracks and 57 vias.
It is built around the PIC18F4620-E/P, FT230XS-R and ZMM5V1, with the MF-MSMF200-2 among its other parts. Its parts include 22 resistors, 16 connectors, 12 capacitors, 8 diodes and 3 ICs. It belongs with the PIC boards of this library.
Main components
4
PIC18F4620-E/P
PDIP-40-40℃~+125℃ 10bit 1KB 25MHz 3.8KB 36 4.2V~5.5V 64KB 8 Bit Built-in FLASH PIC PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB Converters
ZMM5V1
LL-341 Independent 100nA 35Ω 4.8V~5.4V 5.1V 500mW 550Ω LL-34 Zener Diodes ROHSSlkorZener Diodes
MF-MSMF200-2
1812-40℃~+85℃ 20mΩ 2A 2W 3.2mm 40A 4A 5.4mm 80mΩ 8V 1812 Resettable Fuses ROHSBournsResettable Fuses
README
README.mdA PIC18 development board
Based off of Professor Felix Pinai's ECE3301L board
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 220 | Resistor_SMD:R_0402_1005Metric | R4, R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 7 | 220 | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4, RN5, RN6, RN7 |
| 6 | ZMM5V1 | ZM4748A_L0G:DIOMELF5124N | D3, D4, D5, D6, D7, D8 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R17, R19, R20, R21, TH1 |
| 5 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4, J13, J14, J15, J16 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_ISO14580_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 100nf | Capacitor_SMD:C_0402_1005Metric | C8, C10, C12 |
| 3 | 33 | Resistor_SMD:R_0402_1005Metric | R2, R3, R5 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C6 |
| 2 | 1uf | Capacitor_SMD:C_0402_1005Metric | C9, C11 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 47pf | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 8 MHz | ATS08A-E:XTAL_HC49P488W43L1085T450H368 | Y1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_02x20_Odd_Even | PinSockets:PinSocket_2x20_Counter_Clockwise_P2.54mm_Vertical | J1 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U3 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LM4040DBZ-4.1 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | MF-MSMF200-2 | MF-MSMF200-2:FUSER_MF-MSMF200-2 | F1 |
| 1 | PIC18F4620 | DILB40P-223TLF:AMPHENOL_DILB40P-223TLF | U1 |
| 1 | Port A | PinHeaders:PinHeader_2x04_P2.54mm_Vertical_Red | J8 |
| 1 | Port B | PinHeaders:PinHeader_2x04_P2.54mm_Vertical_Yellow | J10 |
| 1 | Port C | PinHeaders:PinHeader_2x04_P2.54mm_Vertical_Blue | J11 |
| 1 | Port D | PinHeaders:PinHeader_2x04_P2.54mm_Vertical_White | J12 |
| 1 | Port E | PinHeaders:PinHeader_2x04_P2.54mm_Vertical_Green | J9 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D2.5mm | TP1 |
| 1 | USB_A | Connector_USB:USB_A_TE_292303-7_Horizontal | J3 |
| 1 | USB_OTG | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J7 |
Questions
How big is the PIC18 PCB?
It measures 76.5 × 75.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PIC18 use?
75 parts, built around the PIC18F4620-E/P, FT230XS-R, ZMM5V1 and MF-MSMF200-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIC18 KiCad files?
From the pixelatedknight27/PIC18 repository on GitHub, at the commit this page was made from: the board is PIC18.kicad_pcb and its schematic PIC18.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIC18 design in my own project?
Its repository states no licence, so its author keeps all rights: ask pixelatedknight27 before reusing the design.
Similar boards
- 2 layers56 × 44 mm
- 4 layers90.5 × 68.3 mm
- 2 layers74.3 × 91.5 mm
- 4 layers150 × 95 mm
Skysweep32 rev c
bobberdolle1/SkySweep32
Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype
103 parts33GPL-3.0 - 2 layers
Pi Compute-3-Lite BLANK
tmtrcreations/Pi-Compute-3-Lite-BLANK
Blank KiCad schematic for creating a project with the Pi CM3L.
33 parts30 - 2 layers95.3 × 69.9 mm
Pi compute device
marcbperez/pi-compute-device
A portable device built with the Raspberry Pi Compute module.
67 parts11Apache-2.0 - 2 layers71.9 × 98.6 mm
Ark
tmtrcreations/The_Ark
PCB design files and configuration files for a Raspberry Pi CM3L based tablet.
112 parts9MIT