2 layers
Pi Compute-3-Lite BLANK
tmtrcreations/Pi-Compute-3-Lite-BLANK
Blank KiCad schematic for creating a project with the Pi CM3L.
33 parts30
2 layers95.3 × 69.9 mm
Pi compute device
marcbperez/pi-compute-device11A portable device built with the Raspberry Pi Compute module.
- Size
- 95.3 × 69.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 162
- Pads
- 522
- Tracks, vias
- 965, 139
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Mar 2017
- Updated
- 18 Nov 2020
Overview
Pi compute device is an open-source printed circuit board by marcbperez, from the marcbperez/pi-compute-device repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 95.3 × 69.9 mm with 67 parts on 162 nets, routed with 965 tracks and 139 vias.
It is built around the PAM2306AYPKE, AP2331W and AP7115-25SEG, with the DMG1012T and MF-MSMF200-2 among its other parts. Its parts include 24 resistors, 20 capacitors, 9 connectors, 4 ICs and 4 transistors. It belongs with the computers and single-board computers boards and the Raspberry Pi (Linux) boards of this library.
Main components
5
PAM2306AYPKE
WDFN-12L-EP(3x3)-40℃~+85℃ 1.5MHz 1A 2 2.5V~5.5V 40uA Adjustable Buck Buck Built-in Yes WDFN-12L-EP(3x3) DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
AP2331W
SC-59-40℃~+85℃ 1 2.7V~5.2V 200mA 250mΩ High Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Over Temperature Protection SC-59 Power Distribution Switches ROHSDiodes IncorporatedPower Distribution Switches
AP7115-25SEG
SOT-353-40℃~+85℃ 1 150mA 2.5V 200mV@(150mA) 5.5V 50uA 50uVrms 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-353 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
DMG1012T
SOT-523-55℃~+150℃ 1 N-channel 1V 20V 280mW 300mΩ@4.5V、400mΩ@2.5V、500mΩ@1.8V 5.37pF 60.67pF 630mA 736.6pC@4.5V 9.68pF SOT-523 MOSFETs ROHSDiodes IncorporatedMOSFETs
MF-MSMF200-2
1812-40℃~+85℃ 20mΩ 2A 2W 3.2mm 40A 4A 5.4mm 80mΩ 8V 1812 Resettable Fuses ROHSBournsResettable Fuses
README
README.mdpi-compute-device
A portable device built with the Raspberry Pi Compute module.
Installation
The schematics project is done in KiCad, free and available to most common platforms. More information on how to download and install KiCad can be found in its official download page.
Usage
Clone the sources and browse the package folder. The KiCad project is located in
kicad-project/pi-compute-device.pro.
git clone https://github.com/marcbperez/pi-compute-device
cd pi-compute-deviceTesting
There is no testing in place for this project yet.
Troubleshooting
The issue tracker intends to manage and compile bugs, enhancements, proposals and tasks. Reading through its material or reporting to its contributors via the platform is strongly recommended.
Contributing
This project adheres to Semantic Versioning and to certain syntax conventions defined in .editorconfig. To get a list of changes refer to the CHANGELOG. Only branches prefixed by feature-, hotfix-, or release- will be considered:
- Fork the project.
- Create your new branch:
git checkout -b feature-my-feature develop - Commit your changes:
git commit -am 'Added my new feature.' - Push the branch:
git push origin feature-my-feature - Submit a pull request.
Credits
This project is created by marcbperez and maintained by its author and contributors.
License
This project is licensed under the Apache License Version 2.0.
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0R | Resistors_SMD:R_0201 | R1, R2, R3, R5, R7, R8, R9, R15, R19 |
| 7 | 100K | Resistors_SMD:R_0201 | R6, R12, R13, R18, R21, R22, R23 |
| 4 | 100n | Capacitors_SMD:C_0201 | C6, C9, C19, C20 |
| 4 | 10u | Capacitors_SMD:C_0201 | C10, C11, C14, C15 |
| 4 | 47u | Capacitors_SMD:C_0201 | C1, C2, C8, C13 |
| 4 | DMG1012T | DMG1012T:DMG1012T | Q1, Q2, Q3, Q4 |
| 3 | 1u | Capacitors_SMD:C_0201 | C5, C16, C18 |
| 3 | 4.7u | Capacitors_SMD:C_0201 | C4, C7, C17 |
| 3 | NF | Resistors_SMD:R_0201 | R10, R11, R20 |
| 2 | 4.7u | Inductors:Inductor_Taiyo-Yuden_MD-2020 | L1, L2 |
| 2 | 470R | Resistors_SMD:R_0201 | R4, R14 |
| 2 | 47K | Resistors_SMD:R_0201 | R16, R17 |
| 2 | CONN_02X30 | Pin_Headers:Pin_Header_Straight_2x30_Pitch2.00mm | P6, P7 |
| 2 | LED | LEDs:LED_0402 | D1, D2 |
| 2 | NF | Capacitors_SMD:C_0201 | C3, C12 |
| 1 | 1K | Resistors_SMD:R_0201 | R24 |
| 1 | 47151-1051 | 10029449-111RLF:10029449-111RLF | J1 |
| 1 | AP2331W | AP2331W:AP2331W | U3 |
| 1 | AP7115-25SEG | AP7115-25SEG:AP7115-25SEG | U1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.00mm | P1 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.00mm | P3 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.00mm | P2 |
| 1 | DDR2_SODIMM_CM3 | 1473005:1473005 | P5 |
| 1 | ESD5384 | ESD5384:ESD5384 | U4 |
| 1 | MF-MSMF200 | MF-MSMF200:MF-MSMF200 | F1 |
| 1 | Micro_SD_Card | 2908-05WB-MG:2908-05WB-MG | CON1 |
| 1 | PAM2306AYPKE | PAM2306AYPKE:PAM2306AYPKE | U2 |
| 1 | USB_OTG | 10103594-0001LF:10103594-0001LF | P4 |
The 66 most common of 67 parts.
Questions
How big is the Pi compute device PCB?
It measures 95.3 × 69.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pi compute device use?
67 parts, built around the PAM2306AYPKE, AP2331W, AP7115-25SEG and DMG1012T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pi compute device KiCad files?
From the marcbperez/pi-compute-device repository on GitHub, at the commit this page was made from: the board is kicad-project/pi-compute-device.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pi compute device design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers71.9 × 98.6 mm
Ark
tmtrcreations/The_Ark
PCB design files and configuration files for a Raspberry Pi CM3L based tablet.
112 parts9MIT - 2 layers171.7 × 76.2 mm
R2W Pi PGS
tmtrcreations/R2W_Pi_PGS
Open source handheld gaming device based on the Raspberry Pi CM3L
45 parts5 - 4 layers100 × 85 mm
- 4 layers26.4 × 56 mm
RPI5-SDexpress Hat
will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"
51 parts37MIT - 8 layers35.5 × 25 mm
- 2 layers230 × 70 mm
CyCompute
M2I-HABET/CyStack
This is the electronics stack and associated software for a module payload stack
29 parts3 - 6 layers60 × 20.4 mm
Rp3a0-mini
CopperPilot/rpi-zero-2w-kicad
KiCad port of jonny12375/rp3a0: Raspberry Pi Zero 2W's RP3A0 on a Pi Pico-sized board
124 parts1