
OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.

Pisspcb is an open-source printed circuit board by pissnet, from the pissnet/piss_stm32 repository on GitHub. It is a 4-layer board of 67 × 64 mm with 74 parts on 115 nets, routed with 761 tracks and 91 vias.
It is built around the LAN8742A-CZ, W25Q128JVSIQ and AMS1117-3.3, with the HR911105A among its other parts. Its parts include 25 capacitors, 22 resistors, 12 connectors, 5 diodes and 3 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7, C10, C11, C12, C13, C14, C15, C17, C19, C20, C21, C24, C25 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R9, R12, R13, R14, R20 |
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | 49.9R | Resistor_SMD:R_0603_1608Metric | R15, R17, R18, R19 |
| 3 | 33R | Resistor_SMD:R_0603_1608Metric | R7, R8, R10 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C18, C22 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 270R | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | 3.3pF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 12.1k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 2.0A/0.050 DCR | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | RG1 |
| 1 | BOOT0 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | Blue | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | GPIO C | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J10 |
| 1 | GPIO D | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | GPIO E | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | Green | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | HR911105A | Connector_RJ:RJ45_Hanrun_HR911105A | J9 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | LAN8742A | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U3 |
| 1 | LOGO | piss:piss | G*** |
| 1 | PWRLED | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | Red | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | SPI1 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J8 |
| 1 | SPI2 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J12 |
| 1 | STM32F417VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | Tag-Connect | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J11 |
| 1 | USART1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | USART3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | USART6 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | Yellow | LED_SMD:LED_0603_1608Metric | D1 |

OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.


MayaPosch/LEDNip
STM32F427-based developer board with 5 channels for controlling LEDs.


ajisrawi/atc-roip-gateway
Airborne Radio-over-IP (RoIP) gateway bridging aircraft VHF COM + HF transceivers to an IP network (Starlink) with an ED-137-style RTP/PTT/COR stream. KiCad hardware, routed 4-layer PCB, STM32H743 firmware.



It measures 67 × 64 mm and has 4 copper layers, 4.69 mm thick.
74 parts, built around the LAN8742A-CZ, W25Q128JVSIQ, AMS1117-3.3 and HR911105A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pissnet/piss_stm32 repository on GitHub, at the commit this page was made from: the board is pisspcb.kicad_pcb and its schematic ethernet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pissnet before reusing the design.