2 layers78 × 67 mm
Solenoid board
PinballWizards/pcb_solenoid_board
KiCAD PCB files for Solenoid Node Board
44 partsGPL-3.0
2 layers105 × 90 mm
Solenoid board
PinballWizards/LED_Matrix_PCB- Size
- 105 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 114
- Nets
- 66
- Pads
- 268
- Tracks, vias
- 545, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Feb 2020
- Updated
- 11 Apr 2020
Overview
Solenoid board is an open-source printed circuit board by PinballWizards, from the PinballWizards/LED_Matrix_PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 105 × 90 mm with 114 parts on 66 nets, routed with 545 tracks and 2 vias.
It is built around the SN65HVD72DRBR and CDSOT23-SM712. Its parts include 37 resistors, 2 connectors and 1 capacitor.
Main components
2
SN65HVD72DRBR
SON-8(3x3)-40℃~+125℃ 1 1 213 250Kbps 3V~3.6V 950uA Half-Duplex Transceiver ±8kV SON-8(3x3) RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICs
CDSOT23-SM712
SOT-23-55℃~+125℃ 13.3V 150W 15V、25V 500nA 75pF 7A 7V、12V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)
README
LED_Matrix_PCB/README.mdpcb_solenoid_board
KiCAD PCB files for Solenoid Node Board
Parts
114| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | +5VIN1, COMMS0, COMMS1, LED0_0, LED0_1, LED0_2, LED0_3, LED0_4, LED0_5, LED0_6, LED1_0, LED1_1, LED1_2, LED1_3, LED1_4, LED1_5 +36 |
| 14 | 2N7000 | digikey-footprints:TO-92-3 | FET0, FET1, FET2, FET3, FET4, FET5, FET6, FET7, FET8, FET9, FET10, FET11, FET12, FET13 |
| 14 | 3k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R3k0, R3k1, R3k2, R3k3, R3k4, R3k5, R3k6, R3k7, R3k8, R3k9, R3k10, R3k11, R3k12, R3k13 |
| 13 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R100, R102, R103, R104, R105, R106, R107, R108, R109, R110, R111, R112, R113 |
| 7 | 300 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R300, R301, R302, R303, R304, R305, R306 |
| 2 | 10 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10, R11 |
| 1 | 0.1 nF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C0.1nF0 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R101 |
| 1 | CDSOT23-SM712 | CDSOT23-SM712:CDSOT23-SM712 | Prt_IC1 |
| 1 | CP | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | CP0 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | GND1 |
| 1 | MCU_LEFT_LEGS | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | MCU_RIGHT_LEGS | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J3 |
| 1 | SN65HVD72DR | sn65hvd72:SN65HVD72DR | RS-485 |
The 110 most common of 114 parts.
Questions
How big is the Solenoid board PCB?
It measures 105 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solenoid board use?
114 parts, built around the SN65HVD72DRBR and CDSOT23-SM712. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solenoid board KiCad files?
From the PinballWizards/LED_Matrix_PCB repository on GitHub, at the commit this page was made from: the board is LED_Matrix_PCB/solenoid_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solenoid board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers30 × 60 mm
SplitFlapDriverATtiny1616V4
adamgmakes/SplitFlapDisplay
A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.
25 parts190 - 4 layers117 × 107 mm
- 8 layers136.9 × 155.9 mm
- 4 layers122 × 87 mm
- 4 layers78.9 × 74.9 mm
- 4 layers150 × 80 mm
Mek output expander
mekatrol/electronics
This repository contains the electronics, embedded firmware, support software, and reference material for a collection of home-automation and workshop projects.
132 parts - 6 layers69.7 × 76.7 mm
Amulet controller
EPFLXplore/XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project
414 parts348Apache-2.0