4 layers87.9 × 23 mm
4 layers50 × 50 mm
Esp32p4
PickaxeHit/esp32p4-devboard4- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 173
- Nets
- 209
- Pads
- 733
- Tracks, vias
- 2,478, 377
- Pours
- 1,027
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Jan 2025
- Updated
- 21 Jan 2025
Overview
Esp32p4 is an open-source printed circuit board by PickaxeHit, from the PickaxeHit/esp32p4-devboard repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 50 × 50 mm with 173 parts on 209 nets, routed with 2,478 tracks and 377 vias.
It is built around the ESP32-C6-MINI-1U-H4, TLV62569DBV and W25Q128JVEIQ, with the USBLC6-2SC6, AO3401A and MBT3906DW1 among its other parts. Its parts include 77 resistors, 51 capacitors, 9 connectors, 8 ICs and 7 transistors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
6
ESP32-C6-MINI-1U-H4
SMD,13.2x12.5mm-105.5dBm -40℃~+105℃ 2.4GHz 20.5dBm 382mA 3V~3.6V 73mA ESP32-C6FH4 Integrated Bluetooth function、Integrated Zigbee function、Support USB interface UART、SDIO、SPI、I2C、GPIO、USB SMD,13.2x12.5mm WiFi Modules ROHSEspressif SystemsWiFi Modules
TLV62569DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
W25Q128JVEIQ
WSON-8-EP(6x8)-40℃~+85℃ 100,000 cycles 10uA 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(6x8) NOR FLASH ROHSWinbondNAND FLASH
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
MBT3906DW1
SOT-363-55℃~+150℃ 150mW 2 PNP 200mA 250MHz 400mV 40V 50nA 5V 60 PNP SOT-363 Bipolar (BJT) ROHSonsemiBipolar (BJT)
Parts
173| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 0 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R11, R13, R14, R15, R16, R17, R18, R19, R20, R24, R25, R26, R28 +14 |
| 20 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C13, C14, C16, C18, C25, C26, C27, C28, C29, C30, C32, C34, C46 +4 |
| 14 | 10k | Resistor_SMD:R_0402_1005Metric | R21, R22, R23, R33, R35, R36, R42, R43, R44, R53, R57, R61, R63, R64 |
| 14 | 51k | Resistor_SMD:R_0402_1005Metric | R37, R38, R39, R40, R41, R45, R46, R47, R48, R49, R50, R54, R58, R62 |
| 9 | 10u | Capacitor_SMD:C_0402_1005Metric | C2, C5, C15, C17, C19, C31, C33, C48, C51 |
| 9 | 1u | Capacitor_SMD:C_0402_1005Metric | C10, C11, C20, C21, C22, C23, C24, C35, C49 |
| 9 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP7, TP8, TP9, TP10, TP11 |
| 6 | 5k1 | Resistor_SMD:R_0402_1005Metric | R51, R52, R55, R56, R59, R60 |
| 4 | 22p | Capacitor_SMD:C_0402_1005Metric | C38, C39, C40, C43 |
| 4 | 33 | Resistor_SMD:R_0402_1005Metric | R4, R9, R10, R12 |
| 4 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q4, Q6 |
| 3 | MBT3906DW1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q3, Q5, Q7 |
| 3 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6, U7, U8 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R31, R32 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C7, C12 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C36, C37 |
| 2 | 2k2 | Resistor_SMD:R_0402_1005Metric | R65, R66 |
| 2 | 2u2 | Inductor_SMD:L_APV_ANR5020 | L1, L2 |
| 2 | 4K02 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C41, C44 |
| 2 | Conn_02x15_Top_Bottom | easyeda2kicad:117342485 | J6, J7 |
| 2 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U2, U3 |
| 1 | 10M | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C42 |
| 1 | 15k | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C45 |
| 1 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 68k | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | BAT+ | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | BAT- | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | BOOT | easyeda2kicad:SW-SMD_4P-L3.5-W3.4-P2.20-LS4.2-1 | SW1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J8 |
| 1 | Conn_02x16_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J9 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DEBUG | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | ESP32-C6-MINI-1/U | PCM_Espressif:ESP32-C6-MINI-1 | U5 |
| 1 | FS | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
| 1 | HS | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5 |
| 1 | LOGO | LOGO | G*** |
| 1 | Micro_SD_Card_Det1 | easyeda2kicad:TF-SMD_TF-PUSH | J1 |
| 1 | RESET | easyeda2kicad:SW-SMD_4P-L3.5-W3.4-P2.20-LS4.2-1 | SW2 |
| 1 | W25Q128JVE | Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U4 |
| 1 | ~ | PCM_Espressif:ESP32-P4 | U1 |
The 170 most common of 173 parts.
Questions
How big is the Esp32p4 PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Esp32p4 use?
173 parts, built around the ESP32-C6-MINI-1U-H4, TLV62569DBV, W25Q128JVEIQ and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32p4 KiCad files?
From the PickaxeHit/esp32p4-devboard repository on GitHub, at the commit this page was made from: the board is esp32p4.kicad_pcb and its schematic esp32p4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32p4 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 6 layers65.3 × 57.8 mm
Layercam pro
offgridevices/offgrid-hardware
Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.
189 partsCERN-OHL-S-2.0 - 2 layers36 × 23 mm
Zigbee toy
cristianchelu/oddware
Personal collection of projects that don't deserve their own repositories.
73 parts2AGPL-3.0 - 4 layers177 × 118 mm
E ink picture frame
bkuhn4/e-ink-picture-frame
To make it easy for you to get started with GitLab, here's a list of recommended next steps.
110 parts - 4 layers110 × 110 mm
Smoothiev2-prime
Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards
453 parts71 - 2 layers103.6 × 98.5 mm
Schema Electronique 2223
AresEnsea/2324_Projet2A_AresCFR
Ce repository GitHub regroupe l'ensemble des projets & documents réalisés par l'association Ares pour la Coupe de France de Robotique 2024 – Farming Mars.
70 parts7 - 2 layers103.6 × 98.5 mm
- 2 layers
