

Pic30f experimentation board
This is the initial PCB for the pic30f-experimentation-kit.
- Size
- 154.9 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 68
- Pads
- 184
- Tracks, vias
- 298, 17
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Feb 2026
- Updated
- 8 Feb 2026
Overview
Pic30f experimentation board is an open-source printed circuit board by pic30f-experimentation-kit, from the pic30f-experimentation-kit/pwm-board repository on GitHub. It is a 2-layer board of 154.9 × 101.6 mm with 51 parts on 68 nets, routed with 298 tracks and 17 vias.
It is built around the DSPIC30F3013-30I/SP, LM386 and NE5532. Its parts include 14 capacitors, 11 resistors, 9 ICs, 4 switches and 3 diodes. It belongs with the PIC boards of this library.
Main components
3DSPIC30F3013-30I/SP
SPDIP-28-300mil-40℃~+125℃ 2.5V~5.5V 24KB 28 40MHz Interrupt response、Integrated ADC interface、Integrated PWM control、Low-power mode、Hardware MAC acceleration、Secure storage and protection、Circular buffer support SPDIP-28-300mil Digital Signal Processors (DSP/DSC) ROHSMicrochip TechnologyDigital Signal Processors (DSP/DSC)LM386
SOP-80.2% 0℃~+70℃ 4V~12V 4mA 50dB 700mWx1@8Ω Analog voltage gain SOP-8 Audio Amplifiers ROHSGcoreAudio Power OpAmpsNE5532
SOP-8-22V~22V 0℃~+70℃ 100dB 10nA 14mA 2 40V/us 42mA 4mV 800nA 8nV/√Hz@30Hz Built-in compensation SOP-8 Operational Amplifier ROHSSungineOperational Amplifier
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C1, C2, C3, C4, C5, C14 |
| 6 | 56k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R5, R6, R7, R8 |
| 5 | PL9823 | ProjectFootprints:PL9823F5 | U6, U7, U8, U9, U10 |
| 3 | 1u | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C8, C9, C10 |
| 3 | 270 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R10, R11 |
| 3 | 50k | ProjectFootprints:3386P | RV1, RV2, RV3 |
| 3 | 50k | ProjectFootprints:HA06-SM065 | RV4, RV5, RV6 |
| 3 | RED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 2 | 100p | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C6, C7 |
| 2 | Off (On) SPDT | ProjectFootprints:1825910-6 | SW2, SW3 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 220u | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C13 |
| 1 | 22u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C12 |
| 1 | 470u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C11 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1 |
| 1 | Conn_01x06_Pin | ProjectFootprints:PICKit-Header-6 | J2 |
| 1 | DSPIC30F3013-30I/SP | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | LM386 | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | MCP2221AxP | Package_DIP:DIP-14_W7.62mm | U5 |
| 1 | NE5532 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | SW_DPDT_x2 | ProjectFootprints:400UDP1R1BLKM2RE | SW4 |
| 1 | SW_SPST | ProjectFootprints:J-977 | SW1 |
| 1 | Speaker 8Ω | ProjectFootprints:CES-2704-088L050 | LS1 |
Similar boards
- 2 layers114 × 89 mm

- 2 layers100 × 90 mm

- 2 layers166.1 × 165.6 mm

- 2 layers52.5 × 36.6 mm

ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers100 × 68 mm

- 2 layers165 × 103.8 mm

Output pcb
QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack
128 parts116 - 2 layers173 × 85 mm

Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
268 parts101WTFPL - 2 layers84 × 85 mm

Questions
How big is the Pic30f experimentation board PCB?
It measures 154.9 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pic30f experimentation board use?
51 parts, built around the DSPIC30F3013-30I/SP, LM386 and NE5532. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pic30f experimentation board KiCad files?
From the pic30f-experimentation-kit/pwm-board repository on GitHub, at the commit this page was made from: the board is pic30f-experimentation-board.kicad_pcb and its schematic pic30f-experimentation-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pic30f experimentation board design in my own project?
Its repository states no licence, so its author keeps all rights: ask pic30f-experimentation-kit before reusing the design.