4 layers159.6 × 100 mm
Template Board
devtank-ltd/kicad_hiltop_board_template
HILTOP Reference design template for new plug-in test modules/cards
128 parts2
2 layers101.6 × 50.8 mm
Ackbar
phuzzykins/Ackbar- Size
- 101.6 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 42
- Pads
- 105
- Tracks, vias
- 185, 12
- Pours
- 71
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Sep 2023
- Updated
- 30 Nov 2023
Overview
Ackbar is an open-source printed circuit board by phuzzykins, from the phuzzykins/Ackbar repository on GitHub. It is a 2-layer board of 101.6 × 50.8 mm with 16 parts on 42 nets, routed with 185 tracks and 12 vias.
It is built around the TMC2209 and MBR230LSFT1G. Its parts include 7 connectors, 3 ICs, 1 resistor and 1 diode. It belongs with the ESP32 and RP2040 boards of this library.
Main components
2README
README.mdAckbar's Snack Bar
A new rat trap design
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J7 |
| 1 | EPD | SparkFun-Connector:1X08 | J6 |
| 1 | ESP32-S3 Pico | Ackbar:Waveshare ESP32-S3 Pico | U1 |
| 1 | GNSS | SparkFun-Connector:1X05 | J2 |
| 1 | HALL | SparkFun-Connector:1X03 | J3 |
| 1 | MBR230LSFT1G | Diode_SMD:D_SOD-123 | D1 |
| 1 | MOTOR | SparkFun-Connector:1X04 | J4 |
| 1 | PWR_IN | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J5 |
| 1 | TMC2209 | Ackbar:BTT TMC2209 | U3 |
| 1 | TOF | SparkFun-Connector:1X05 | J1 |
| 1 | VREG | Ackbar:Buck Regulator | U2 |
Questions
How big is the Ackbar PCB?
It measures 101.6 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ackbar use?
16 parts, built around the TMC2209 and MBR230LSFT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ackbar KiCad files?
From the phuzzykins/Ackbar repository on GitHub, at the commit this page was made from: the board is Board/Ackbar.kicad_pcb and its schematic Board/Ackbar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ackbar design in my own project?
Its repository states no licence, so its author keeps all rights: ask phuzzykins before reusing the design.
Similar boards
- 2 layers79 × 79 mm
- 4 layers36.3 × 36 mm
LipoCharger
DevinJM3/Lipo-Charger-Board
This project is a custom-designed Lithium Polymer battery charging and protection circuit with a regulated 5V output.
35 partsMIT - 2 layers159.4 × 99.9 mm
- 4 layers159.1 × 99.9 mm
- 4 layers159.9 × 99.9 mm
- 4 layers159.6 × 100 mm
- 4 layers33.9 × 33 mm
