2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396
2 layers67.9 × 45.5 mm
The repo for the PCB made to work with the micronova_controller project.
- Size
- 67.9 × 45.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 22
- Pads
- 60
- Tracks, vias
- 108, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Sep 2022
- Updated
- 14 May 2026
Overview
EDA is an open-source printed circuit board by philibertc, from the philibertc/micronova_controller_pcb repository on GitHub. It is a 2-layer board of 67.9 × 45.5 mm with 17 parts on 22 nets, routed with 108 tracks and 19 vias.
It is built around the WEMOS D1 MINI. Its parts include 5 connectors, 4 resistors and 4 ICs. It belongs with the ESP8266 boards of this library.
Main components
1README
README.mdmicronova_controller_pcb
The repo for the PCB made to work with the micronova_controller project. Software details here.
Kits are available on Tindie!
In stock every month.
Here is an overview of the additions:
- possibility to reset the settings with a flat screwdriver
- IO footprints are now designed to accept screw terminals
- D0 and RST are connected for deep sleep
- a row of pins has been added to access unused pins
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Working with
stoves equipped with Micronova mainboard.
Known brands
- AMG S.p.A. (Artel, Kalor, Tepor, Foco, Adler)
- Anselmo Cola
- Boreal
- Bronpi
- Cadel
- Clam
- Corisit S.r.l. (Lincar, Vulcania, Arce)
- Ecoteck
- EL.FIRE
- EOSS
- EvaCalor
- Fontana Calore
- Fonte Flamme
- Galletti
- Globe-Fire
- Italiana Camini
- Jolly Mec
- Karmek
- Kepo
- Klover
- Laminox
- LMX
- La Nordica S.p.A (Extraflame, Dal Zotto)
- Lorflam
- MCZ (Brisach, Cadel, FreePoint, Pegaso, Red)
- Moretti Design
- Nordic Fire
- Palladio
- Piazetta
- Sicalor
- Stufe a pellet Italia
- Tecnoflam
- Termoflam
- Thermoflux
- TS
- Ungaro
- Zibro
Confirmed working with
Known models
- RED Loto
- MCZ Kaika/Face
- FreePoint Sharp
- Anselmo Cola Aloe
- Kalor Compact (boiler, fumesTempAddr 0xFF, flamePowerAddr 0x37)
- ITC Layma (boiler, fumesTempAddr 0x5A, no water pressure value available)
- Piazetta P958D
- Piazetta Line
- ETNA Giulia EVO (Micronova J042, fumes temp and power reading doesn't work for the moment)
- Extraflame Teodora Evo (at least turning on works)
- El.Fire Venice Slim
- Palladio Europa
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 3 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U3, U4 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3, TP4 |
| 2 | TestPoint_Flag | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J5 |
| 1 | WeMos_D1_mini | RF_Module:WEMOS_D1_mini_light | U1 |
Similar boards
- 2 layers37.6 × 29.3 mm
Romulator programmer interface
bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems
5 parts160 - 2 layers32.1 × 40.8 mm
Power Monitor Version 1
alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
8 parts122 - 2 layers91 × 49 mm
- 2 layers97.5 × 59.3 mm
Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 2 layers64.6 × 36.9 mm
Navien latest
htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices
30 parts65 - 2 layers49.5 × 30 mm
- 2 layers
Questions
How big is the EDA PCB?
It measures 67.9 × 45.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EDA use?
17 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EDA KiCad files?
From the philibertc/micronova_controller_pcb repository on GitHub, at the commit this page was made from: the board is EDA/PCB/PCB.kicad_pcb and its schematic EDA/PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EDA design in my own project?
Its repository states no licence, so its author keeps all rights: ask philibertc before reusing the design.