Skip to the content
2 layers65 × 57 mmHAT 2, the printed circuit board in 3D

Argus is an autonomous inspection robot designed for thermal power plants and industrial facilities, built to detect gas leaks, analyze temperature anomalies, and enhance safety in high-risk environments.

Size
65 × 57 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
25
Pads
81
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
29 Jul 2025
Updated
31 Oct 2025

Overview

HAT 2 is an open-source printed circuit board by Phil-obed, from the Phil-obed/Argus-bot repository on GitHub. It is a 2-layer board of 65 × 57 mm with 26 parts on 25 nets.

README

README.md

Argus: Autonomous Inspection Robot for Thermal Power Plants

Overview

Argus is an autonomous inspection robot designed for thermal power plants and industrial facilities, built to detect gas leaks, analyze temperature anomalies, and enhance safety in high-risk environments.

The system combines embedded intelligence, sensor fusion, and real-time data visualization to create a fully autonomous, operator-assisted inspection solution.

Key Features

Gas Leakage Detection: Dual MQ sensors (MQ-9 & MQ-135) monitor air quality and hazardous gases.

Thermal Anomaly Detection: MLX90640 thermal camera identifies abnormal heat zones.

Autonomous Navigation: Vector Field Histogram (VFH) algorithm for obstacle avoidance and path planning.

Visual Feedback: Raspberry Pi Camera (5MP) provides live video feed for remote inspection.

Environmental Awareness: Ultrasonic sensors (HC-SR04) for distance and obstacle detection.

Web Dashboard: Real-time data visualization, manual control, GPS tracking, and thermal video feed.

Control Architecture:

Raspberry Pi 5: High-level data processing, dashboard hosting, and decision logic.

ESP32: Low-level motor and sensor control, real-time feedback loops.

System Architecture

Hardware Stack

Raspberry Pi 5 ESP32 microcontroller MLX90640 Thermal Imaging Sensor MQ-9 and MQ-135 Gas Sensors Raspberry Pi Camera (5MP) HC-SR04 Ultrasonic Sensors (x3) 12V 250RPM DC Motors (x4) L293D Motor Driver Modules 12V 10Ah Li-ion Battery LM2596 Buck Converter for power regulation

Software Stack

Python (Flask, OpenCV, MQTT, WebSocket) C/C++ (ESP32 motor control and sensor communication) VFH Algorithm for autonomous motion planning Web dashboard (HTML, CSS, JS, Chart.js, Leaflet.js for GPS tracking)

Functional Workflow

  1. Data Acquisition: Thermal, gas, and ultrasonic sensors continuously stream readings.

  2. Processing: Raspberry Pi analyzes thermal and air-quality data for anomalies.

  3. Navigation: ESP32 executes motor commands and obstacle avoidance using VFH.

  4. Visualization: The web dashboard displays real-time video, graphs, GPS location, and sensor data.

  5. Control: Operator can manually override autonomy and send direct commands.

Web Dashboard

Features:

Real-time thermal camera visualization Live video feed from onboard Pi Camera Gas and temperature trend graphs GPS-based location tracking (via Google Maps / Leaflet.js) Manual control console System health monitoring

Power System

Battery: 12V 10Ah Li-ion Regulation: LM2596 Buck Converter (5V and 3.3V outputs) Drive System: 4WD DC geared motors (250 RPM) Motor Drivers: L293D ICs

Author

Philemon Obed Obeng philemonobjnr@gmail.com https://www.linkedin.com/in/philemon-obed-obeng-a4497524b/

Parts

26
QtyValueFootprintReferences
14RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal1K1, 1K2, 1K3, 1K4, 1K5, 1K6, 1K8, 2K1, 2K2, 2K3, 2K4, 2K5, 2K6, 2K7
13.3VConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ1
1Conn_01x17_PinConnector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_VerticalJ2
1GPSConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ11
1MQ-135Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ10
1MQ-9Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ14
1Thermal CamConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1US 1Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ6
1US 2Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1US 3Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1US 4Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ9
1US 5Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1USBConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ13

More from Phil-obed/Argus-bot

1
  • 2 layers78 × 63 mmHAT 1, the printed circuit board in 3D

    HAT 1

    Phil-obed/Argus-bot

    Argus is an autonomous inspection robot designed for thermal power plants and industrial facilities, built to detect gas leaks, analyze temperature anomalies, and enhance safety in high-risk environments.

    11 parts2

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the HAT 2 PCB?

It measures 65 × 57 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HAT 2 use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HAT 2 KiCad files?

From the Phil-obed/Argus-bot repository on GitHub, at the commit this page was made from: the board is circuits/pcb_designs/pcb/HAT/HAT_2/HAT_2.kicad_pcb and its schematic circuits/pcb_designs/pcb/HAT/HAT_1/HAT_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HAT 2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Phil-obed before reusing the design.