
HAT 2
Phil-obed/Argus-bot
Argus is an autonomous inspection robot designed for thermal power plants and industrial facilities, built to detect gas leaks, analyze temperature anomalies, and enhance safety in high-risk environments.

Argus is an autonomous inspection robot designed for thermal power plants and industrial facilities, built to detect gas leaks, analyze temperature anomalies, and enhance safety in high-risk environments.
HAT 1 is an open-source printed circuit board by Phil-obed, from the Phil-obed/Argus-bot repository on GitHub. It is a 2-layer board of 78 × 63 mm with 11 parts on 88 nets.
It is built around the L293D. Its parts include 8 connectors and 3 ICs. It belongs with the ESP32 boards of this library.
Argus: Autonomous Inspection Robot for Thermal Power Plants
Overview
Argus is an autonomous inspection robot designed for thermal power plants and industrial facilities, built to detect gas leaks, analyze temperature anomalies, and enhance safety in high-risk environments.
The system combines embedded intelligence, sensor fusion, and real-time data visualization to create a fully autonomous, operator-assisted inspection solution.
Key Features
Gas Leakage Detection: Dual MQ sensors (MQ-9 & MQ-135) monitor air quality and hazardous gases.
Thermal Anomaly Detection: MLX90640 thermal camera identifies abnormal heat zones.
Autonomous Navigation: Vector Field Histogram (VFH) algorithm for obstacle avoidance and path planning.
Visual Feedback: Raspberry Pi Camera (5MP) provides live video feed for remote inspection.
Environmental Awareness: Ultrasonic sensors (HC-SR04) for distance and obstacle detection.
Web Dashboard: Real-time data visualization, manual control, GPS tracking, and thermal video feed.
Control Architecture:
Raspberry Pi 5: High-level data processing, dashboard hosting, and decision logic.
ESP32: Low-level motor and sensor control, real-time feedback loops.
System Architecture
Hardware Stack
Raspberry Pi 5 ESP32 microcontroller MLX90640 Thermal Imaging Sensor MQ-9 and MQ-135 Gas Sensors Raspberry Pi Camera (5MP) HC-SR04 Ultrasonic Sensors (x3) 12V 250RPM DC Motors (x4) L293D Motor Driver Modules 12V 10Ah Li-ion Battery LM2596 Buck Converter for power regulation
Software Stack
Python (Flask, OpenCV, MQTT, WebSocket) C/C++ (ESP32 motor control and sensor communication) VFH Algorithm for autonomous motion planning Web dashboard (HTML, CSS, JS, Chart.js, Leaflet.js for GPS tracking)
Functional Workflow
Data Acquisition: Thermal, gas, and ultrasonic sensors continuously stream readings.
Processing: Raspberry Pi analyzes thermal and air-quality data for anomalies.
Navigation: ESP32 executes motor commands and obstacle avoidance using VFH.
Visualization: The web dashboard displays real-time video, graphs, GPS location, and sensor data.
Control: Operator can manually override autonomy and send direct commands.
Web Dashboard
Features:
Real-time thermal camera visualization Live video feed from onboard Pi Camera Gas and temperature trend graphs GPS-based location tracking (via Google Maps / Leaflet.js) Manual control console System health monitoring
Power System
Battery: 12V 10Ah Li-ion Regulation: LM2596 Buck Converter (5V and 3.3V outputs) Drive System: 4WD DC geared motors (250 RPM) Motor Drivers: L293D ICs
Author
Philemon Obed Obeng philemonobjnr@gmail.com https://www.linkedin.com/in/philemon-obed-obeng-a4497524b/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | L293D | Package_DIP:DIP-16_W7.62mm | U2, U3 |
| 2 | motor1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | motor2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J7 |
| 1 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | Conn_01x17_Pin | Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_Vertical | J6 |
| 1 | ESP32-DEVKITC-32D | Kit:MODULE_ESP32-DEVKITC-32D | U1 |
| 1 | Raspberry pi 5 GPIOs | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | power input | TerminalBlock_CUI:TerminalBlock_CUI_TB007-508-03_1x03_P5.08mm_Horizontal | J12 |

Phil-obed/Argus-bot
Argus is an autonomous inspection robot designed for thermal power plants and industrial facilities, built to detect gas leaks, analyze temperature anomalies, and enhance safety in high-risk environments.

ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards

NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)

geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…


harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.



It measures 78 × 63 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Phil-obed/Argus-bot repository on GitHub, at the commit this page was made from: the board is circuits/pcb_designs/pcb/HAT/HAT_1/HAT_1.kicad_pcb and its schematic circuits/pcb_designs/pcb/HAT/HAT_1/HAT_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Phil-obed before reusing the design.