2 layers160 × 100.3 mm Distro, the printed circuit board in 3D

Distro

Size: 160 × 100.3 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 178
Nets: 130
Pads: 725
Tracks, vias: 0, 0
Routed: Not yet
KiCad: KiCad 3
Created: 14 Aug 2015
Updated: 19 May 2016

Overview

Distro is an open-source printed circuit board by phelpsw, from the phelpsw/power_distro repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 160 × 100.3 mm with 178 parts on 130 nets.

It is built around the 74LS74PC, MIC5014 and INA139NA, with the IRFZ44N, M2022LL2W13-C and SSW-106-02-G-D-RA among its other parts. Its parts include 39 capacitors, 33 connectors, 33 fuses, 31 resistors and 22 ICs.

Main components

README

readme.md

Dependencies

Libs

Footprints

Models

Project files

Show this board on your page

https://pcbkit.io/boards/phelpsw/power_distro

The board's own page, for a message or a post.

Source

Repository: phelpsw/power_distro
Board file: distro.kicad_pcb
Commit: 3439590
Licence: CC-BY-SA-4.0

Parts

178

Qty	Value	Footprint	References
15	0.1uF	SM0805	C5, C9, C10, C11, C18, C19, C20, C21, C22, C23, C24, C25, C26, C34, C38
10	1.1A 24V	littelfuse-2920L	F11, F13, F20, F22, F24, F25, F26, F27, F31, F32
9	JST-PA-2	s2b-ph-sm4-tb	J11, J12, J14, J15, J16, J23, J24, J25, J26
8	4A 5V	littelfuse-1206	F1, F2, F3, F4, F5, F6, F7, F8
8	IRFZ44	d2-pak	Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
6	1.1A 5V	littelfuse-1206	F10, F14, F15, F17, F28, F29
5	0.022uF	SM0805	C12, C13, C14, C15, C16
5	300	SM0805	R23, R24, R27, R28, R31
5	74LS74	so-14	U3, U7, U10, U11, U14
5	BI_LED	LED_PLCC3	D4, D5, D6, D7, D8
5	DNP	SM0805	C3, R1, R2, R3, R4
5	Pad	1pin	P1, P3, P4, P5, P6
4	1.6A 24V	littelfuse-2920L	F18, F19, F21, F23
4	1uF	SM1206	C30, C31, C33, C37
4	4.42k	SM0805	R14, R33, R34, R35
4	JST-PA-3	s3b-ph-sm4-tb	J17, J18, J21, J22
4	MCP601-SOT	SOT23-5	U16, U17, U18, U19
4	MIC5014	so-8	U8, U9, U12, U13
3	0.033uF	SM0805	C6, C7, C8
3	1.85A 24V	littelfuse-2920L	F9, F16, F33
3	100k	SM0805	R12, R16, R18
3	100uF	SMDHD/VF	C1, C2, C29
3	10uF	c_tant_V	C4, C28, C32
3	DF13-6	df13-6p-125h	J3, J5, J27
3	INA139	SOT23-5	U4, U5, U6
3	JST-PA-4	s4b-ph-sm4-tb	J10, J19, J20
3	LED Green	LED-0805	D1, D2, D10
2	2m	LVK25	R5, R9
2	47.5k	SM0805	R21, R25
2	66.5k	SM0805	R22, R26
2	DF13-4	df13-4p-125h	J2, J13
2	FILTER	SM0603	R37, R38
1	1.3k	SM0805	R8
1	1.5A 5V	littelfuse-1206	F30
1	10	SM0805	R39
1	10k	SM0805	R7
1	10m	LVK25	R11
1	150	SM0805	R13
1	1M	SM0805	R36
1	2.6A 5V	littelfuse-1206	F12
1	27nH	inductor_smd_0402	L1
1	470	SM0805	R15
1	47pF	SM0603	C39
1	510	SM0805	R17
1	57.6k	SM0805	R29
1	68.1k	SM0805	R6
1	75k	SM0805	R10
1	BATTERY	BR2032	BT1
1	DF13-5	df13-5p-125h	J4
1	M2022LL2W13	switch-M2022LL2W13	SW1
1	MB3045S-E3/8W	d2-pak	D3
1	MEGAFIT-4SKT	molex-MEGAFIT-4SKT-RA	J1
1	MS4525DO-DS	DIP-8__300	U21
1	NEO-M8	NEO-M8N	U24
1	PQD6-D	PQD6-D	U20
1	SMA RA	sma_90_r300.124.403	P2
1	SSW-106-02-G-D-RA	con-samtec-SSW-106-02-S-D-RA	J9
1	SSW-108-02-S-D-RA	con-samtec-SSW-108-02-S-D-RA	J8
1	SSW-116-02-S-TRA	con-samtec-SSW-116-02-S-T-RA	J6
1	TC1055	SOT23-5	U23
1	TSW-108-08-G-T-RA	con-samtec-TSW-108-02-S-T-RA	J7
1	VHE100W	VHE100W	U1
1	VQE50W	VQE50W	U2

Similar boards

4 layers
Johaa1993 pdb pdb1
oomlout/oomlout_oomp_project_bot_v_2

49 parts
10 layers120 × 120 mm
K410t devboard
antmicro/kintex-410t-devboard
This repository contains open hardware design files for a devkit created for AMD-Xilinx Kintex-7 K410T FPGA.
1,020 parts46Apache-2.0
4 layers150 × 50 mm
Ict baseboard
antmicro/ict-baseboard
PCB design for implementing In-Circuit Testing of other PCBs via an USB-enabled host
277 parts4Apache-2.0
4 layers75 × 55 mm
Eos epu up5k
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
145 parts8MIT
4 layers46 × 55.8 mm
F051-ESC-4in1-V2
jpwolfe9912/F051-ESC-4in1-V2

223 parts13
4 layers60 × 40 mm
SuperCapPowerBoard G431 Lite V1
evil0knight/RM_SUPERCAP_JSU
C++,KICAD，H桥升降压，拟合，测电流电阻
145 parts5
2 layers100 × 100 mm
Openmower Brushed
gk977246/Openmower_Brushed
I have rebuilt a Bosch Indego800. It had no RPMSensor on the mowing motor, so i added magnet and hallsensor myself. It is easily possible, to convert any old mower with brushed motors, to openmower with RTK.
139 parts1
6 layers46 × 55.8 mm
F051-ESC-6L V1
jpwolfe9912/F051-ESC-6L-V1

228 parts1

Questions

How big is the Distro PCB?

It measures 160 × 100.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Distro use?

178 parts, built around the 74LS74PC, MIC5014, INA139NA and IRFZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Distro KiCad files?

From the phelpsw/power_distro repository on GitHub, at the commit this page was made from: the board is distro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Distro design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

Overview

Main components

74LS74PC

MIC5014

INA139NA

IRFZ44N

M2022LL2W13-C

SSW-106-02-G-D-RA

SSW-108-02-S-D-RA