Skip to the content
2 layers50.3 × 22.1 mmCan2usb, the printed circuit board in 3D

Can2usb

PGRacing/USB2CAN1
Full screenGitHub.kicad_pcb
Size
50.3 × 22.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
33
Pads
161
Tracks, vias
309, 27
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
7 Oct 2022
Updated
13 Dec 2024

Overview

Can2usb is an open-source printed circuit board by PGRacing, from the PGRacing/USB2CAN repository on GitHub. It is a 2-layer board of 50.3 × 22.1 mm with 40 parts on 33 nets, routed with 309 tracks and 27 vias.

It is built around the MIC5528-3.3YMT-TR, TLP175A and USBLC6-2SC6. Its parts include 10 capacitors, 8 resistors, 5 ICs, 3 diodes and 3 connectors. It belongs with the STM32 boards of this library.

Main components

3

README

README.md

USB2CAN

This solution is created to communicate with custom CANBUS devices by USB to PC (windows). The reasoning of the device creation is Formula Student bolide managment. Device is based on STM32F103 and MCP2561 and USB-FS (on USB-C connector).

RENDER

TODO:
  1. Fix the USB-C header
  2. Fix the 5V LDO enable pin

Parts

40
QtyValueFootprintReferences
4100nCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC1, C2, C3, C4
422pFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC5, C6, C7, C8
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
3510Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR2, R3, R4
3BUILTIN_LEDLED_SMD:LED_0805_2012MetricD1, D2, D3
210uFCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC9, C10
21kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR5, R8
222Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR6, R7
10Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderRCF1
1100Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderCAN_T
116MHzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mmY1
11k5Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderRCF2
1300mAFuse:Fuse_0805_2012MetricF1
132KHzCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY2
15.1kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1
1Conn_01x03_MaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1MCP2561-E-SNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1MIC5528-3.3YMT-TRcan2usb:SON40P120X120X60-7NU6
1STLINKConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1STM32F103C6TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU1
1SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1TLP175APackage_SO:MFSOP6-4_4.4x3.6mm_P1.27mmU2
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U5
1USB_C_Plug_USB2.0Connector_USB:USB_C_Receptacle_GCT_USB4085P1

More from PGRacing/USB2CAN

1
  • 2 layers58.5 × 22.2 mmCan2usb 0805, the printed circuit board in 3D

    Can2usb 0805

    PGRacing/USB2CAN

    39 parts1

Similar boards

  • 4 layers46.1 × 20.3 mmUSB2CANv2, the printed circuit board in 3D

    USB2CANv2

    Mieho1/USB2CAN_Hardware

    66 parts
  • 4 layers95.9 × 96.5 mmFlight Controller, the printed circuit board in 3D

    Flight Controller

    Flynsky/Aeolus

    An STM32 based Drone Ecosystem, containing a FC, ESC and GS

    248 parts
  • 6 layers100 × 67.8 mm12v-2x6, the printed circuit board in 3D

    12v-2x6

    eggsampler/12v-2x6-Current-Monitor

    For more information, see the schematic or the PCB layout (KiCanvas)

    152 parts1
  • 4 layers55 × 73.5 mmLibreCAL, the printed circuit board in 3D

    LibreCAL

    jankae/LibreCAL

    4 port eCal module

    132 parts140GPL-3.0
  • 2 layers142 × 23 mmMassue bento v4, the printed circuit board in 3D

    Massue bento v4

    benkuper/BenTo-Legacy

    Legacy repository for the former BenTo-Club project

    101 parts1GPL-3.0
  • 4 layers38.1 × 38.1 mmCamera serializer, the printed circuit board in 3D

    Camera serializer

    MissouriMRDT/RoveSoCameraServer_Hardware

    This is the repository for a custom camera server using a Jetson Xavier NX and the GMSL2 protocol.

    88 parts1GPL-3.0
  • 4 layers49.3 × 40 mmBLE REMOTE, the printed circuit board in 3D

    BLE REMOTE

    ebertmx/DODGECLOCK

    A shot clock system for competitve dodgeball. The system consists of two devices: display and controller.

    82 partsMIT

Questions

How big is the Can2usb PCB?

It measures 50.3 × 22.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Can2usb use?

40 parts, built around the MIC5528-3.3YMT-TR, TLP175A and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Can2usb KiCad files?

From the PGRacing/USB2CAN repository on GitHub, at the commit this page was made from: the board is PCB/can2usb/can2usb.kicad_pcb and its schematic PCB/can2usb/can2usb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Can2usb design in my own project?

Its repository states no licence, so its author keeps all rights: ask PGRacing before reusing the design.