2 layers50.3 × 22.1 mm
4 layers46.1 × 20.3 mm
USB2CANv2
Mieho1/USB2CAN_Hardware- Size
- 46.1 × 20.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 90
- Pads
- 230
- Tracks, vias
- 440, 74
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Jan 2024
- Updated
- 14 Apr 2025
Overview
USB2CANv2 is an open-source printed circuit board by Mieho1, from the Mieho1/USB2CAN_Hardware repository on GitHub. It is a 4-layer board of 46.1 × 20.3 mm with 66 parts on 90 nets, routed with 440 tracks and 74 vias.
It is built around the TLP175A, MIC5528-3.3YMT-TR and USBLC6-2P6, with the ABM3-16.000MHZ-B4Y-T among its other parts. Its parts include 18 capacitors, 18 resistors, 7 ICs, 5 connectors and 4 diodes. It belongs with the STM32 boards of this library.
Main components
4
TLP175A
SMD-41ms 5V 60V FET SMD-4 Transistor, Photovoltaic Output Optoisolators ROHSToshibaTransistor, Photovoltaic Output Optoisolators
MIC5528-3.3YMT-TR
TDFN-6-EP(1.2x1.2)-40℃~+125℃@(Tj) 1 175uVrms 3.3V 5.5V 500mA 70dB@(100Hz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable TDFN-6-EP(1.2x1.2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
ABM3-16.000MHZ-B4Y-T
SMD5032-20℃~+70℃ 16MHz 18pF 40Ω ±30ppm ±30ppm SMD5032 Crystals ROHSAbraconCrystals
README
README.mdUSB2CAN_Hardware
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C3, C4, C5, C6, C10 |
| 4 | 0 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R16, R17, R18 |
| 4 | 22pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15, C16, C17, C18 |
| 4 | 510 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R12, R13, R14 |
| 4 | BUILTIN_LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J4, J5 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R7, R10 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C9 |
| 2 | 2.2u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11, C12 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | MCP2561-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U5 |
| 2 | TLP175A | Package_SO:MFSOP6-4_4.4x3.6mm_P1.27mm | U4, U6 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 32KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 39n | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | ABM3-16.000MHZ-B4Y-T | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | Conn_01x06_Pin | IDC:IDC_SMD_3PIN | J2 |
| 1 | LOGO | footprints:PGR_male | G*** |
| 1 | LOGO | footprints:PGR_srednie | G*** |
| 1 | MIC5528-3.3YMT-TR | MIC5528-3.3YMT-TR:SON40P120X120X60-7N-D | IC1 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SW_BOOT0 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | SW1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J1 |
Similar boards
- 2 layers90 × 56 mm
- 2 layers90 × 98 mm
- 4 layers55 × 73.5 mm
- 2 layers142 × 23 mm
Massue bento v4
benkuper/BenTo-Legacy
Legacy repository for the former BenTo-Club project
101 parts1GPL-3.0 - 4 layers38.1 × 38.1 mm
Camera serializer
MissouriMRDT/RoveSoCameraServer_Hardware
This is the repository for a custom camera server using a Jetson Xavier NX and the GMSL2 protocol.
88 parts1GPL-3.0 - 4 layers49.3 × 40 mm
BLE REMOTE
ebertmx/DODGECLOCK
A shot clock system for competitve dodgeball. The system consists of two devices: display and controller.
82 partsMIT - 4 layers95.9 × 96.5 mm
Questions
How big is the USB2CANv2 PCB?
It measures 46.1 × 20.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the USB2CANv2 use?
66 parts, built around the TLP175A, MIC5528-3.3YMT-TR, USBLC6-2P6 and ABM3-16.000MHZ-B4Y-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USB2CANv2 KiCad files?
From the Mieho1/USB2CAN_Hardware repository on GitHub, at the commit this page was made from: the board is USB2CANv2/USB2CANv2.kicad_pcb and its schematic USB2CANv2/USB2CANv2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USB2CANv2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Mieho1 before reusing the design.