
Main project
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Novel algorithms to properly and accurately condition NTC thermistors
Test shield is an open-source printed circuit board by pexlab-unipr, from the pexlab-unipr/ntc-conditioning repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 70 × 82.5 mm with 20 parts on 120 nets.
Its parts include 8 diodes, 8 connectors and 4 switches.
Novel algorithms to properly and accurately condition NTC thermistors
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED | Diode_SMD:D_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Horizontal | J3, J4, J5, J6 |
| 4 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxG | SW1, SW2, SW3, SW4 |
| 2 | Conn_02x19_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J1, J2 |
| 1 | Micro_SD_Card_Det1 | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J7 |
| 1 | Screw_Terminal_01x02 | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical | J8 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

JanM321/esphome-lg-controller
Wired controller for LG HVAC units using ESPHome and ESP32


RespiraWorks/Ventilator
Fully-featured ICU ventilator design, optimized for manufacture using commonly available components and free to license.

dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

lukasloetkolben/OpenpilotHardware
Welcome to the Openpilot Hardware Collection!

macaba/TheManhattanToolkit
Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP

It measures 70 × 82.5 mm and has 4 copper layers, 1.6 mm thick.
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pexlab-unipr/ntc-conditioning repository on GitHub, at the commit this page was made from: the board is hw/test_shield/test_shield.kicad_pcb and its schematic hw/test_shield/connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).