
SimonShield
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

Simple electronics and SW project for creating a digital cooking/meat thermometer.
Cooking thermometer is an open-source printed circuit board by petterssonandreas, from the petterssonandreas/cooking_thermometer repository on GitHub, published under the MIT licence. It is a 2-layer board of 75 × 40 mm with 61 parts on 45 nets, routed with 355 tracks and 53 vias.
It is built around the BC547. Its parts include 11 resistors, 8 capacitors, 8 connectors, 5 switches and 4 diodes. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Simple electronics and SW project for creating a digital cooking/meat thermometer.
A probe from an old broken thermometer is used. The probe appears to be an NTC with around 200k resistance at 25C. Tests done at different temps to get a curve for the probe, curve can be found in adc.c.
The probe is connected to the HW via a 2.5mm "mono" jack with tip detection.
The processor used is an STM32G0B0KE with 512 kB flash and 144 kB SRAM. It comes in a LQFP32 package.
The product is powered via USB or via a 3.6V Li-ion battery, which is also charged when USB is connected. The battery is recycled from another old product. A small MCP73831 is used for the battery charging.
A small OLED display is used to display temperature and other info.
An active buzzer is used for the alarm functionality.
The system runs on 3.3 V.
git clone git@github.com:petterssonandreas/cooking_thermometer.gitpython3 -m venv .venv
source .venv/Scripts/activatepip3 install westwest init -l cooking_thermometer/
west updatewest zephyr-exportwest packages pip --installwest sdk installwest build -p always -b ct_g0b0ke cooking_thermometer/apps/ct/
west flash| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9, R11 |
| 3 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C5 |
| 3 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R6, R10 |
| 3 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C9, C10 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C8 |
| 1 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 3V3_Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 4k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 5V_Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Active_Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1 |
| 1 | BOOT0_SW | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | FTDI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | GREEN_LED_PWR | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D4 |
| 1 | MCP1700x-330xxTO | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | NRST_SW | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | OLED_CONN | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | PA0 | TestPoint:TestPoint_Pad_D2.0mm | TP11 |
| 1 | PA1 | TestPoint:TestPoint_Pad_D2.0mm | TP12 |
| 1 | PA11/9 | TestPoint:TestPoint_Pad_D2.0mm | TP13 |
| 1 | PA12/10 | TestPoint:TestPoint_Pad_D2.0mm | TP14 |
| 1 | PA15 | TestPoint:TestPoint_Pad_D2.0mm | TP15 |
| 1 | PB0 | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | PB1 | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
| 1 | PB3 | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | PB4 | TestPoint:TestPoint_Pad_D2.0mm | TP7 |
| 1 | PB5 | TestPoint:TestPoint_Pad_D2.0mm | TP8 |
| 1 | PB8 | TestPoint:TestPoint_Pad_D2.0mm | TP9 |
| 1 | PB9 | TestPoint:TestPoint_Pad_D2.0mm | TP10 |
| 1 | PC14 | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | PC15 | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | PC6 | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | RED_LED_CHARGING | LED_THT:LED_Rectangular_W5.0mm_H2.0mm | D3 |
| 1 | STLINK | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | STM32G0B0KETx | MyOwnFootprintLibrary:LQFP-32_7x7mm_P0.8mm_Long_pads | U1 |
| 1 | THERMO_CONN | MyOwnFootprintLibrary:Jack_Mono_2.5mm_with_Tip-Detect_Electrokit_41010270 | J8 |
| 1 | UI_A_SW | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | UI_B_SW | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | UI_C_SW | Button_Switch_THT:SW_PUSH_6mm | SW5 |
| 1 | USB_C | MyOwnFootprintLibrary:USB_C_Receptacle_6P_TopMnt_Horizontal_Long_Pads_Electrokit_41021035 | J9 |
| 1 | WHITE_LED | LED_THT:LED_D4.0mm | D2 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!



ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

It measures 75 × 40 mm and has 2 copper layers, 1.6 mm thick.
61 parts, built around the BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the petterssonandreas/cooking_thermometer repository on GitHub, at the commit this page was made from: the board is kicad/cooking_thermometer.kicad_pcb and its schematic kicad/cooking_thermometer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).